Nikon Camera D7100 Users Manual

173
y
Editing Movies
Trim footage to create edited copies of movies or save selected frames as JPEG stills.
Tr i m m i n g  M ov i e s
To create trimmed copies of movies:
1Display a movie full frame.
Press the K button to display pictures full 
frame in the monitor and press  4 and  2 to 
scroll through pictures until the movie you 
wish to edit is displayed.
2Choose a starting or end point.
Play the movie back as described on page 
171, pressing  J to start and resume 
playback and  3 to pause and...

174
y
4Select Choose start/end point .
Highlight Choose start/end point  and press 
J . 
The dialog shown at right will be displayed; 
choose whether the current frame will be 
the starting or end point of the copy and 
press  J.
5Delete frames.
If the desired frame is not currently 
displayed, press  4 or  2 to advance or 
rewind (to skip to 10 s ahead or back, rotate 
the main command dial; to skip to the first or 
last frame, rotate the sub-command dial).
 To  
switch the current selection from start...

175
y
ATrimming Movies
Movies must be at least two seconds long.
 If a copy can not be created at the current 
playback position, the current position will be displayed in red in Step 5 and no copy will be 
created.
 The copy will not be saved if there is  insufficient space available on the memory 
card.
Copies have the same time and date of creation as the original.
AThe Retouch Menu
Movies can also be edited using the  Edit movie option in the retouch 
menu ( 0273). 

176
y
Saving Selected Frames
To save a copy of a selected frame as a JPEG still:
1View the movie and choose a frame.
Play the movie back as described on page 
171; your approximate position in the movie 
can be ascertained from the movie progress 
bar.
 Press  4 or  2 to rewind or advance and 
press  3 to pause the movie at the frame you 
intend to copy.
2Display movie edit options.
Press the  P button to display movie edit 
options.
3Choose  Save selected frame .
Highlight Save selected frame  and press...

177
%
%
Special Effects
Special effects can be used when recording images.
To view the currently selected special effect mode, rotate the mode dial to q and 
press the  R button.
 To choose another special effect mode, rotate the main 
command dial.
Shooting with Special Effects
Mode dial Main command dial Monitor
ANEF (RAW)
If NEF (RAW ) + JPEG is selected for image quality in  %, g , i , or  u mode, only the JPEG 
images will be recorded ( 066).
 If NEF (RAW ) is selected, fine-quality JPEG photographs...

178
%
%Night Vision
Use under conditions of darkness to 
record monochrome images at high ISO 
sensitivities (with some noise in the form 
of randomly-spaced bright pixels, fog, or 
lines).
 Manual focus can be used if the 
camera is unable to focus using autofocus.
 
The built-in flash turns  off; use of a tripod 
is recommended to reduce blur.
 During 
viewfinder photography,  the built-in AF-
assist illuminator will  light to assist the 
focus operation; to disable the illuminator, 
select  Off for...

179
%
uSelective Color
All colors other than the selected colors 
are recorded in black and white.
 The 
effect can be chosen during live view 
( 0 182).
 The built-in flash turns off; use of 
a tripod is recommended when lighting is 
poor.
1 Silhouette
Silhouette subjects  against bright 
backgrounds.
 The built-in flash turns off; 
use of a tripod is recommended when 
lighting is poor.
2 High Key
Use with bright scenes to create bright 
images that seem  filled with light.
 The 
built-in flash turns...

180
%
Options Available in Live View
❚❚g Color Sketch
1Press the  a button.
The mirror will be raised and the view through 
the lens will be displayed in the camera 
monitor.
2Adjust options.
Press  J to display the options shown at right 
(note that the options  temporarily clear from 
the display during autofocus).
 Press  1 or  3 to 
highlight  Vividness  or Outlines  and press  4 
or  2 to change.
 Vividness can be increased to 
make colors more saturated, or decr eased for a washed-out,...

181
%
❚❚i Miniature Effect
1Press the  a button.
The mirror will be raised and the view through 
the lens will be displayed in the camera 
monitor.
2Position the focus point.
Use the multi selector to position the focus 
point in the area that will be in focus and then 
press the shutter-release button halfway to 
focus (note that the options temporarily clear 
from the display during autofocus).
 To  
temporarily clear miniature effect options from the display and enlarge the 
view in the monitor for...

182
%
❚❚u Selective Color
1Press the  a button.
The mirror will be raised and the view through 
the lens will be displayed in the camera 
monitor.
2Display options.
Press  J to display selective color options.
3Select a color.
Frame an object in the white square in the 
center of the display and press  1 to choose the 
color of the object as one that will remain in 
the final image (the camera may have difficulty 
detecting unsaturated colors; choose a 
saturated color).
 To zoom in on the center of 
the...