Nikon Camera Coolpix P530 Reference Manual

E65
Reference Section
Vibration Reduction
Set to reduce the effects of camera shake while shooting.
Set Vibration reduction to  Off when using a tripod to stabilize the camera 
during shooting.
BNotes About Vibration Reduction• After turning on the camera or after switching from playback mode to shooting 
mode, wait for the shooting mode screen to be displayed completely before 
taking images.
• Images displayed in the camera monitor immediately after shooting may be 
displayed blurry.
• Vibration...

E66
Reference Section
Motion Detection
Enable motion detection to reduce the effects of subject movement and 
camera shake when shooting still images.
BNotes About Motion Detection
•Motion detection may be unable to elimin ate the effects of subject movement and 
camera shake in some situations.
• Motion detection may be disabled if the  subject exhibits significant movement or 
is too dark.
• The images captured using motion detection may be somewhat “grainy” in 
appearance.
AF Assist
Enable or disable...

E67
Reference Section
Digital Zoom
BNotes About Digital Zoom
•Digital zoom cannot be used in the following scene modes.
- Scene auto selector , Portrait , Night portrait , Easy panorama , Pet portrait
• Digital zoom cannot be used when using certain settings of other functions.
• When digital zoom is in effect,  Metering (E 32) is set to  Center-weighted  or 
Spot  depending on the magnification of an enlargement.
Sound Settings
Press the  d button  M z tab ( A9) M Digital zoom
OptionDescription
On...

E68
Reference Section
Auto Off
Set the amount of time that elapses before the camera  enters standby mode 
( A 23).
You can select  30 s, 1 min  (default setting),  5 min, or 30 min .
CNotes About Auto Off
The time that passes before the camera enters standby mode is fixed in the following 
situations:
•When a menu is displayed: 3 mi nutes (when auto off is set to 30 s or 1 min )
• When the AC adapter is connected: 30 minutes
 Press the  d button  M z tab ( A9) M Auto off 

E69
Reference Section
Format Memory/Format Card
Use this option to format the internal memory or a memory card.
Formatting the internal  memory or memory cards permanently deletes 
all data. Data that has been  deleted cannot be recovered. Make sure to 
transfer important images to a computer before formatting.
• Do not turn the camera off or open th e battery-chamber/memory card slot cover 
during formatting.
Formatting the Internal Memory
Remove the memory card from the camera. The 
Format memory...

E70
Reference Section
TV Settings
Adjust settings for connection to a TV.
CHDMI and HDMI-CEC
HDMI (High-Definition Multimedia Interface) is a multimedia interface. 
HDMI-CEC (HDMI-Consumer Electronics Control) allows compatible devices to inter-
operate.
Press the  d button  M z tab ( A9) M TV settings
OptionDescription
Video mode Select from 
NTSC and PAL . 
Both  NTSC  and PAL are standards for analog color 
television br oadcasting.
• The available frame rates in Movie options  (E 55) 
change...

E71
Reference Section
Charge by Computer
BNotes About Charging with a Computer
•When connected to a computer, the came ra automatically turns on and starts 
charging. If the camera is  turned off, charging stops.
• About 4 hours and 50 minutes are required  to charge a fully exhausted battery.
Charging time increases when  images are transferred while the battery is charging.
• The camera turns off automatically if  there is no communication with the 
computer for 30 minutes after the battery has...

E72
Reference Section
Toggle Av/Tv Selection
Switch the method for setting the flexible program, shutter speed or aperture 
value when shooting mode is set to  j, k , l , m  or  M.
Reset File Numbering
When  Ye s is selected, the sequential numbering of file numbers is reset ( E80). 
After resetting, a new folder is created and the file number for the next image 
taken starts with “0001.”
BNotes About Reset File Numbering
Reset file numbering  cannot be applied when the folder number reaches 999 and...

E73
Reference Section
Blink Warning
Select whether or not the  camera detects human subj ects that have blinked 
using face  detection ( A77) when shooting in the following modes:
• Scene auto selector , Portrait  or Night portrait  (when Tripod is 
selected) scene mode ( A36)
• When shooting mode is set to j , k , l , m  or  M (when  Face priority  
( E 39) is selected for  AF area mode option)
The Blink Warning Screen
Faces detected by the blink warning are 
displayed inside a border.
The operations...

E74
Reference Section
Eye-Fi Upload
BNotes About Eye-Fi Cards
•Note that images will not be uploaded if signal strength is insufficient even if 
Enable  is selected.
• Remove your Eye-Fi card from the camera where wireless devices are prohibited. 
Signals may be transmitted even if  Disable is selected.
• Refer to the instruction manual of your Eye-Fi card for more information. In the 
event of malfunction, cont act the card manufacturer.
•
The camera can be used to turn Eye-Fi cards on and off, but may...