Nikon Camera 1 J5 Reference Manual

139
I
The following operations can be performed while a slide
show is in progress:
The options shown at right are dis-
played when the show ends. Select
Resume to restart or  Exit to exit to the
playback menu.
ToUseDescription
Skip back/skip  ahead
/Rotate the multi selector to skip back or
ahead, or press  4 to return to the previ-
ous frame,  2 to skip to the next frame.
Pause/resume
JPause the show. Press again to resume.
Adjust volume Rotate the command dial to adjust vol-
ume.
Exit to 
playback...

Q
140
Q
Connections
Pictures can be copied to a computer using ViewNX-i.
Installing ViewNX-i
To upload and view pictures, download the latest version of the
ViewNX-i installer from the following website and follow the on-
screen instructions to complete installation.  An Internet connec-
tion is required.  For system requirements and other information,
see the Nikon website for your region (0xvii).
http://nikonimglib.com/nvnxi/
Copying Pictures to a Computer
ACapture NX-D
Use Nikon’s Capture NX-D...

141
Q
Copying Pictures to the Computer
Before proceeding, be sure you have installed ViewNX-i (0140).
1Connect the USB cable.
After turning the camera off  and ensuring that a memory
card is inserted, connect the supplied USB cable as shown
and then turn the camera on.
AUse a Reliable Power Source
To ensure that data transfer is not interrupted, be sure the camera
battery is fully charged.
AConnecting Cables
Be sure the camera is off when connecting or disconnecting inter-
face cables.
 Do not use force...

142
Q
2Start Nikon Transfer 2 component of ViewNX-i.
If a message is displayed prompting you to choose a pro-
gram, select Nikon Transfer 2.
AWindows 7
If the following dialog is displayed, select Nikon Transfer 2 as
described below.
1 Under  Import pictures and videos ,
click  Change program .
 A program
selection dialog will be displayed;
select  Import File using Nikon
Tran s fe r 2  and click OK.
2 Double-click  Import File.
AWindows 8.1
Windows 8.1 may display an AutoPlay
prompt when the camera is...

143
Q
3Click Start Transfer .
At default settings, pictures on  the memory card will be cop-
ied to the computer.
4Terminate the connection.
When transfer is complete, turn the camera off and discon-
nect the USB cable.
Start Transfer
AFor More Information
Consult online help for more information on using ViewNX-i. 

144
Q
Connect the camera to a television for playback.
High-Definition Devices
A type D High- Definition  Multimedia  Interface (HDMI) cable
(available separately from third-party suppliers) can be used to
connect the camera to high-definition video devices.
1Connect the HDMI cable.
Turn the camera off and connect the HDMI cable.
2Tu ne  th e d evice  to  the HDMI channel.
3Turn the camera on.
Turn the camera on; the camera monitor will remain off and
the camera shooting mode display will appear on the...

145
Q
DClose the Connector Cover
Close the connector cover when the connectors are not in use. Foreign
matter in the connectors can interfere with data transfer.
ATelevision Playback
Volume can be adjusted using the co ntrols on the television; adjusting
volume on the camera has no effect. Use of an EH-5b AC adapter and
EP-5F power connector (available separately) is recommended for
extended playback.
AElectronic VR
Electronic vibration reduction ( 0183) can not be applied to movies
while an HDMI cable...

146
Q
Selected JPEG images can be printed on a PictBridge printer
connected directly to the camera.
Connecting the Printer
Connect the camera using the supplied USB cable.
1Turn the camera off.
2Connect the USB cable.
Turn the printer on and connect the USB cable. Do not use
force or attempt to insert the connectors at an angle.
3Turn the camera on.
A welcome screen will be displayed in the monitor, followed
by a PictBridge playback display. To print pictures one at a
time, proceed to page 147. To print...

147
Q
Printing Pictures One at a Time
1Display the desired picture.
Press 4 or  2 to view additional pictures. Rotate the com-
mand dial right to zoom  in on the current frame (0131;
rotate the dial left to exit zoom). To view nine pictures at a
time, rotate the dial left when a picture is displayed full frame.
Use the multi selector to high light pictures, or rotate the
command dial right to displa y the highlighted picture full
frame.
2Adjust printer settings.
Press  J to display the following items,...

148
Q
3Start printing.
Highlight Start printing  and press J to start printing. To
cancel before all copies have been printed, press  J again.
Printing Multiple Pictures
1Display the PictBridge menu.
Press the  G button in the PictBr idge playback display
( 0 146).
2Choose an option.
Highlight one of the following options and press  2.
• Select images for printing : Select pictures for printing. Press 4
or  2 to highlight pictures and press  1 or  3 to choose the
number of prints (up to 99).
• Index...