Nextar Xpj Projector User Manual

Warning Statement 
 
All contents subject to change without prior notice 
 
WARNING 
This equipment has been tested and found to comply with  the limits for a Class A digital device, pursuant to 
Part 15 of the FCC Rules. These lim its are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. This equipment generates, uses, 
and can radiate radio frequency energy and, if not in stalled and used in accordance with the...

 3
                       CONTENT 
Important Safety Instructions--------------------------------------------------- 4 
Introduction------------------------------------------------------------------------\
- 5 
PROJECTOR FEATURES------------------------------------------------------------------------\
---- 5 
SHIPPING CONTENTS------------------------------------------------------------------------\
------ 6 
PROJECTOR EXTERIOR VIEW---------------------------------------------------------------------- 7...

 4
Important Safety Instructions 
λ Operate the unit on 100–240 V AC, 50/60 Hz to DC 12V 7A power adaptor. 
λ Should any liquid or solid object fall into the cabi net, unplug the unit and have it checked by qualified 
personnel before operating it further.   
λ  Unplug the unit from the wall outlet or set the power swit ch to the OFF position if it is not to be used for   
several days.   
λ  To disconnect the cord, pull it out by the plug. Never pull the cord itself.   
λ The wall outlet should be near...

 5
Introduction 
Projector Features 
The projector integrates high-performance optical engine projection and a user-friendly 
design to deliver high reliability and ease of use. 
The projector offers the following features: 
λ Quick cooling function for reducing projector cooling time; 
λ Compact and portable unit; 
λ High quality short throw lens; 
λ Adjustable color balance control for data/video display; 
λ Halogen 75W projection lamp with 3200K color; 
λ Ability to display 16.7 million colors; 
λ...

Shipping Contents 
The projector is shipped with the cables required for connection to a PC and video output devices. Carefully 
unpack the box and verify that you have all of the items shown below. If any of these items are missing, 
please contact your place of purchase. 
The supplied accessories will be suitable for your region, and may differ from those illustrated. 
 
Projector 
 
 
 
 
 
User’s manual 
 
 
AC power adapter 
 
        
Audio cable Power cord S-Video cable 
 
Remote control with...

Projector exterior view 
 
Front / Upper View 
 
 
1. External control panel 
(See External control panel on 
page 9 for detailed information.) 1 
2. Ventilation grill 4 
3. Lens cap 
3 4. Focus adjuster 
5. Front IR remote sensor 5 
 
 
2  
 
 
Left Side View 
Refer to  Connection on page 1 2 for more information on making  connections to various equipment. 
 
 8
7
9 6
10 
6. 12VDC Power jet input 
7. Main Power Switch 
8. 3.5mm Audio in Phone Jack 
9. Video input socket 
10. S-Video input socket...

Right Side View 
 
11  
12 
11. 2W mono speaker 12. Lamp cover 
 
Lower / Bottom View 
 
13
14
 
13. Lamp Cover 14. Ceiling mount and adjustable feet 
 
8 

Controls and Functions 
External Control Panel 
 
8 
9 
10 
11  
765
4
3 
2
1
 
 
1. Focus adjuster (lens focus can be adjusted by this key). 
2. Power (Refer to Start up on page 14 and  Shutdown on page 1 5 for more information.)   
Turns the projector on or off. 
3. Right key. (OSD control only). 
4. Down key. (OSD control only). 
5. Volume increase. Digital volume control. 
6. OSD Menu. Menu recalls for OSD. 
7. Volume decrease. Digital volume control. 
8. OSD Enter/Source (Refer to  Switching input...

Remote Control 
 
 
 
 
POWER – Turns the projector on or off. 
SOURCE  – Sequentially selects the input signal Video, S-Video, Component Video, or RGB. 
MUTE – Audio mute on or off. 
Display – Display the video standard and mode. 
UP – Up key for OSD control. 
LEFT – Left key for OSD control. 
RIGHT – Right key for OSD control. 
DOWN – Down key for OSD control. 
ENTER – Enter key for OSD control. 
VOL+ – Volume increase.    Digital volume control. 
VOL- – Volume decrease.    Digital volume control....