Netgear Wnr2000v5 N300 Wifi Router User Manual
Have a look at the manual Netgear Wnr2000v5 N300 Wifi Router User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 137 Netgear manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 103
Troubleshooting 103
N300 WiFi Router
Power LED Stays Amber
When the router is turned on, the Power LED turns amber for about 20 seconds and
then turns green. If the LED does not turn green, the router has a probl\
em.
If the Power LED is still amber one minute after you turn on power to th\
e router, try the
following:
• Unplug the router’s
power adapter cord. Plug it in again and see if the router recovers.
• T
o return the router to its factory settings, press and hold the Reset button.
For...](http://img.usermanuals.tech/thumb/55/59092/w64_wnr2000v5-n300-wifi-router-user-manual-102.png "Page 103
Troubleshooting 103
N300 WiFi Router
Power LED Stays Amber
When the router is turned on, the Power LED turns amber for about 20 seconds and
then turns green. If the LED does not turn green, the router has a probl\
em.
If the Power LED is still amber one minute after you turn on power to th\
e router, try the
following:
• Unplug the router’s
power adapter cord. Plug it in again and see if the router recovers.
• T
o return the router to its factory settings, press and hold the Reset button.
For...")
![Page 111
Supplemental Information111
N300 WiFi Router
Factory Settings
You can return the router to its factory default settings.
To restore the factory default settings:
1.
Locate the round hole in the bottom of the router
.
The Reset button is inside of this hole.
2. Use a paperclip or sharp object to press and hold the Reset button for at least seven
seconds.
The router resets and returns to the factory configuration settings show\
n in the following
table.
Table 3. Router factory default settings...](http://img.usermanuals.tech/thumb/55/59092/w64_wnr2000v5-n300-wifi-router-user-manual-110.png "Page 111
Supplemental Information111
N300 WiFi Router
Factory Settings
You can return the router to its factory default settings.
To restore the factory default settings:
1.
Locate the round hole in the bottom of the router
.
The Reset button is inside of this hole.
2. Use a paperclip or sharp object to press and hold the Reset button for at least seven
seconds.
The router resets and returns to the factory configuration settings show\
n in the following
table.
Table 3. Router factory default settings...")
Supplemental Information111 N300 WiFi Router Factory Settings You can return the router to its factory default settings. To restore the factory default settings: 1. Locate the round hole in the bottom of the router . The Reset button is inside of this hole. 2. Use a paperclip or sharp object to press and hold the Reset button for at least seven seconds. The router resets and returns to the factory configuration settings show\ n in the following table. Table 3. Router factory default settings FeatureDefault Behavior Router login User login URL www.routerlogin.net User name (case-sensitive) admin Login password (case-sensitive) password Internet connection WAN MAC address Use default hardware address WAN MTU size 1500 Port speed AutoSensing
Supplemental Information 112 N300 WiFi Router Local area network (LAN)LAN IP192.168.1.1 Subnet mask255.255.255.0 DHCP serverEnabled DHCP range192.168.1.2 to 192.168.1.254 Time zoneUnited States is Pacific Time; otherwise, varies by region Time zone adjusted for daylight saving timeDisabled WirelessWireless communicationEnabled SSID namePreset. For information, see the label on the bottom of the router. Network key (password) Broadcast SSIDEnabled Transmission speedAuto Note:Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput varies. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate. Country/regionUnited States in the US; otherwise, varies by region RF channelAuto Operating modeUp to 300 Mbps 20/40 MHz coexistenceEnabled Data rateBest Output powerFull Table 3. Router factory default settings (continued) FeatureDefault Behavior
Supplemental Information113 N300 WiFi Router Technical Specifications Table 4. Router specifications FeatureDescription Data and routing protocols TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, UPnP, and SMB Power adapter • North America: 110V, 60 Hz, input • UK, Australia: 240V, 50 Hz, input • Europe: 230V , 50 Hz, input • All regions (output): 12 VDC @ 0.5A, output Dimensions 48 mm x 132.5 mm x 108 mm (1.89 in. x 5.22 in. x 4.28 in.) Weight 163 g (5.75 oz) Operating temperature 0° to 40°C (32º to 104ºF) Operating humidity 90% maximum relative humidity, noncondensing Electromagnetic emissions FCC Part 15 Class B EN 55 022 (CISPR 22), Class B C-Tick N10947 LAN 10BASE-T or 100BASE-Tx, RJ-45 WAN 10BASE-T or 100BASE-Tx, RJ-45 Wireless Maximum wireless signal rate complies with the IEEE 802.11 standard. See the entry for Transmission speed in Table 3 on page 111. Radio data rates Auto Rate Sensing Data encoding standards IEEE 802.11n, IEEE 802.11g, IEEE 802.11b 2.4 GHz Maximum computers per wireless network Limited by the amount of wireless network traffic generated by each node (typically 50–70 nodes) Operating frequency range 2.412–2.462 GHz (US) 2.412–2.472 GHz (Europe ETSI) 802.11 security WPA-PSK, WPA2-PSK, WPA-PSK + WPA2-PSK mixed mode, WPA/WPA2 Enterprise