Netgear Wnr2000v5 N300 Wifi Router User Manual

Specify Initial Settings 21
 N300 WiFi Router
The screen adjusts:
The router automatically detects the information in the following fields\
:
• Connection T
 ype. This field indicates the connection type that is detected.
• Router
’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired 
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length 
of the prefix, which is also indicated by the underline (_) under the \
IPv6 address. If no 
address is...

Specify Initial Settings 22
N300 WiFi Router 
Use Auto Config for an IPv6 Internet Connection
To set up an IPv6 Internet connection through auto configuration:
1. 
Launch a web browser from a computer or wireless device that is connecte\
d to the 
network.
2.  In the address field of the web browser
 , enter www.routerlogin.net  or 
www.routerlogin.com.
A login screen displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password . The user name and...

Specify Initial Settings 
23  N300 WiFi Router
Most people can leave this field blank, but if your ISP gave you a specific host name, 
enter it here.
7. (Optional) In the DHCP Domain Name (If Required) field, enter a domain name.
You can type the domain name of your IPv6 ISP. Do not enter the domain name for the 
IPv4 ISP here. For example, if your ISP’s mail server is mail.xxx.yyy.zzz, type xxx.yyy.zzz 
as the domain name. If your ISP provided a domain name, type it in this field. For 
example,...

Specify Initial Settings 24
N300 WiFi Router 
5. 
In the Internet Connection Type list, select 6to4 Tunnel .
The screen adjusts:
The router automatically detects the information in the Router’s IPv6 Address on LAN  field. This field shows the IPv6 address that is acquired for the router’s LAN interface. The 
number after the slash (/) is the length of the prefix, which is also \
indicated by the 
underline (_) under the IPv6 address. If no address is acquired, the f\
ield displays Not 
Available.
6....

Specify Initial Settings 
25  N300 WiFi Router
Set Up a Pass Through IPv6 Internet Connection
In pass-through mode, the router works as a Layer 2 Ethernet switch with two ports (LAN and 
WAN Ethernet ports) for IPv6 packets. The router does not process any IPv6 header packets.
To set up a pass-through IPv6 Internet connection:
1. Launch a web browser from a computer or wireless device that is connected to the 
network.
2. In the address field of the web browser, enter www.routerlogin.net or...

Specify Initial Settings 26
N300 WiFi Router 
The screen adjusts:
6. 
Configure the fixed IPv6 addresses for the WAN connection:
• IPv6 Address/Prefix 
 Length. The IPv6 address and prefix length of the router WAN 
interface.
• Default IPv6 Gateway . 
 The IPv6 address of the default IPv6 gateway for the router’s 
WAN interface.
• Primary DNS Server . 
 The primary DNS server that resolves IPv6 domain name 
records for the router.
• Secondary DNS Server . 
 The secondary DNS server that resolves IPv6...

Specify Initial Settings 27
 N300 WiFi Router
Your settings are saved.
Set Up a DHCP IPv6 Internet Connection
To set up an IPv6 Internet connection with a DHCP server:
1. 
Launch a web browser from a computer or wireless device that is connecte\
d to the 
network.
2.  In the address field of the web browser
 , enter www.routerlogin.net  or 
www.routerlogin.com.
A login screen displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password. The user name...

Specify Initial Settings 
28 N300 WiFi Router 
6. (Optional) In the User Class (If Required) field, enter a host name.
Most people can leave this field blank, but if your ISP gave you a specific host name, 
enter it here.
7. (Optional) In the Domain Name (If Required) field, enter a domain name.
You can type the domain name of your IPv6 ISP. Do not enter the domain name for the 
IPv4 ISP here. For example, if your ISP’s mail server is mail.xxx.yyy.zzz, type xxx.yyy.zzz 
as the domain name. If your ISP...

Specify Initial Settings 29
 N300 WiFi Router
The screen adjusts: 
The router automatically detects the information in the following fields\
:
• Router
’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired 
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length 
of the prefix, which is also indicated by the underline (_) under the \
IPv6 address. If no 
address is acquired, the field displays Not Available.
• Router
’s IPv6 Address on LAN. This...

Specify Initial Settings 
30 N300 WiFi Router 
•Auto Config. This is the default setting.
This setting specifies how the router assigns IPv6 addresses to the devices on your home 
network (the LAN). 
10. (Optional) Select the Use This Interface ID check box and specify the interface ID that you 
want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC 
address.
11. Click the Apply button.
Your settings are...