Home > Netgear > Router > Netgear Wndr4500v3 N900 Wifi Dual Band Gigabit Router Premium Edition User Manual

Netgear Wndr4500v3 N900 Wifi Dual Band Gigabit Router Premium Edition User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Netgear Wndr4500v3 N900 Wifi Dual Band Gigabit Router Premium Edition User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 137 Netgear manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Access Storage Devices Through the Internet 
    81  N900 WiFi Router
    Your changes are saved.
    Access Storage Devices Through the Internet with FTP
    You must first set up FTP through Internet access. See Set Up FTP Access Through the 
    Internet on page 80.
    To access a USB device with FTP from a remote computer:
    1. To download, launch a web browser.
    2. To upload, use an FTP client such as filezilla.
    3. Type ftp:// and the Internet port IP address in the address field of the browser. 
    For example, type ftp://10.1.65.4. 
    If you are using Dynamic DNS, type the DNS name.
    For example, type ftp://MyName.mynetgear.com.
    4. When prompted, log in:
    •To log in as admin, in the user name field, enter admin and in the password field, 
    enter the same password that you use to log in to the router.
    •To log in as guest, in the user name field, enter guest. 
    The guest user name does not need a password. To restrict access to the USB 
    device, you can specify that only the admin user can access it. See 
    Control Access to 
    a Storage Device on page 68.
    The files and folders that your account can access on this USB device display. For 
    example, you might see share/partition1/directory1.
    Download Files onto a USB Storage Device
    NETGEAR Downloader is a download agent that runs on the router. You can use it to 
    download files onto a USB HDD that is connected to the router so that you do not need to 
    keep the computer running.
    Download Files
    To use NETGEAR Downloader to download files:
    1. Connect your USB storage device to the router USB port.
    2. If your USB device uses a power supply, connect it.
    You must use the power supply when you connect the USB device to the router.
    When you connect the USB device to the router USB port, it might take up to two minutes 
    before it is ready for sharing. By default, the USB device is available to all computers on 
    your local area network (LAN). 
    						
    							Access Storage Devices Through the Internet 82
    N900 WiFi Router 
    3. 
    Launch a web browser from a computer or wireless device that is connecte\
    d to the network.
    4.  T
    ype  http://www.routerlogin.net  or http://www.routerlogin.com .
    A login screen displays.
    5.  Enter the user name and password.
    The user name is  admin. 
     The default password is password . The user name and 
    password are case-sensitive.
    The BASIC Home screen displays.
    6.  Select  NETGEAR Downloader .
    7. Select the  Enable NETGEAR Downloader check box.
    8.  Click the  Apply button.
    9.  From the Download T
     ype menu, select a download protocol.
    The fields change based on which protocol you choose.
    10.  Complete the fields presented for the option you chose.
    11.  Click the  Add button.
    The router begins the download.
    12.  T
    o display the downloading status, click the  Refresh button.
    You can use the Pause,  Resume, and Delete buttons to manage the downloading tasks. 
     The 
    completed downloading tasks display in the Downloaded Files section.
    Change the Download Settings
    You can change the default save path to any directory on the USB storage \
    device that is  connected to the router. You can change the maximum number of concurrent downloading 
    tasks, but NETGEAR recommends 3 as the most effective setting. You can enable  
    						
    							Access Storage Devices Through the Internet 83
     N900 WiFi Router
    autorefresh to see updated downloading tasks, but this might slow down s\
    peed of the 
    downloads.
    To change NETGEAR Downloader settings:
    1. 
    Launch a web browser from a computer or wireless device that is connecte\
    d to the 
    network.
    2.  T
    ype  http://www.routerlogin.net  or http://www.routerlogin.com .
    A login screen displays.
    3.  Enter the user name and password.
    The user name is  admin. 
     The default password is password. The user name and 
    password are case-sensitive.
    The BASIC Home screen displays.
    4.  Select  ADV
     ANCED > NETGEAR Downloader > Downloader Settings.
    5. Make any needed changes.
    6.  Click the  Apply button.
    Your settings are saved.
    Manage Downloader Tasks
    To manage Downloader tasks:
    1.  Launch a web browser from a computer or wireless device that is connecte\
    d to the 
    network.
    2.  T
    ype  http://www.routerlogin.net  or http://www.routerlogin.com .
    A login screen displays. 
    						
    							Access Storage Devices Through the Internet 84
    N900 WiFi Router 
    3. 
    Enter the user name and password.
    The user name is  admin. 
     The default password is password . The user name and 
    password are case-sensitive.
    The BASIC Home screen displays.
    4.  Select  ADV
     ANCED > NETGEAR Downloader > Download Manager .
    5. Make any needed changes.
    6.  Click the  Apply button.
    Your settings are saved.
    Dynamic DNS
    Internet service providers (ISPs) assign numbers called IP addresses t\
    o identify each 
    Internet account. Most ISPs use dynamically assigned IP addresses. This means that the IP 
    address can change at any time. You can use the IP address to access your network 
    remotely, but most people don’t know what their IP addresses are or when this\
     number 
    changes.
    To make it easier to connect, you can get a free account with a Dynamic D\
    NS service that lets  you use a domain name to access your home network. 
     To use this account, you must set up 
    the router to use Dynamic DNS. Then the router notifies the Dynamic DNS service provider 
    whenever its IP address changes. When you access your Dynamic DNS accoun\
    t, the service 
    finds the current IP address of your home network and automatically conn\
    ects you. 
    If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), the Dynamic 
    DNS service does not work because private addresses are not routed on th\
    e Internet. 
    						
    							Access Storage Devices Through the Internet 85
     N900 WiFi Router
    Set Up a New Dynamic DNS Account
    To set up Dynamic DNS and register for a free NETGEAR account:
    1. 
    Launch a web browser from a computer or wireless device that is connecte\
    d to the 
    network.
    2.  T
    ype  http://www.routerlogin.net  or http://www.routerlogin.com .
    A login screen displays.
    3.  Enter the user name and password.
    The user name is  admin. 
     The default password is password. The user name and 
    password are case-sensitive.
    The BASIC Home screen displays.
    4.  Select  ADV
     ANCED > Advanced Setup > Dynamic DNS .
    5. Select the Use a Dynamic DNS Service  check box.
    6.  In the Service Provider list, select a provider such as NETGEAR.
    7.  In the Host Name field, type the name that you want to use for your URL.
    The host name is sometimes called the domain name. Your free URL includes the host  name that you specify and ends with mynetgear
     .com. For example, specify 
    MyName.mynetgear.com.
    8. 
    9.  In the Password  field, type the password for your account.
    10.  Follow the onscreen instructions to register for your NETGEAR Dynamic DN\
    S service. 
    						
    							86
    8
    8.   Share a USB Printer
    The ReadySHARE Printer utility lets you share a USB printer that is connected to the USB port 
    on your router. You can share this USB printer among the Windows and Mac computers on your 
    network. 
    This chapter contains the following sections:
    •Install the Printer Driver and Cable the Printer 
    •Download the ReadySHARE Printer Utility 
    •Install the ReadySHARE Printer Utility 
    •Use the Shared Printer 
    •View or Change the Status of a Printer 
    •Use the Scan Feature of a Multifunction USB Printer 
    •Change NETGEAR USB Control Center Settings  
    						
    							Share a USB Printer 87
     N900 WiFi Router
    Install the Printer Driver and Cable the Printer
    Some USB printer manufacturers (for example, HP and Lexmark) request t\
    hat you do not 
    connect the USB cable until the installation software prompts you to do \
    so.
    To install the driver and cable the printer:
    1. 
    On each computer on your network that shares the USB printer
     , install the driver 
    software for the USB printer.
    If the printer driver is not installed, contact the printer manufacturer\
    .
    2.  Use a USB printer cable to connect the USB printer to a router USB port.\
    USB ports (2)
    Download the ReadySHARE Printer Utility
    The utility works on Windows and Mac computers.
    To download the utility:
    1. V
    isit  www.netgear.com/readyshare . 
    						
    							Share a USB Printer 88
    N900 WiFi Router 
    2. 
    In the ReadySHARE Printer pane, click the  PC Utility or Mac Utility link.
    3.  Follow the onscreen instructions to download the file.
    Install the ReadySHARE Printer Utility
    You must install the ReadySHARE Printer utility on each computer that wil\
    l share the printer. 
    After you install it, the utility displays as NETGEAR USB Control Center\
     on your computer.
    To install the utility:
    1.  Double-click the ReadySHARE Printer utility setup file that you download\
    ed.
    The InstallShield wizard displays.
    2.  Follow the wizard instructions to install NETGEAR USB Control Center.
    After the InstallShield Wizard completes the installation, the NETGEAR U\
    SB Control  Center prompts you to select a language. 
    						
    							Share a USB Printer 89
     N900 WiFi Router
    3. 
    Select a language from the list and click the  OK button.
    Some firewall software, such as Comodo, blocks NETGEAR USB Control Cente\
    r from 
    accessing the USB printer. If you do not see the USB printer displayed in the screen, you 
    can disable the firewall temporarily to allow the utility to work.
    4.  Select the printer and click the  Connect button.
    The printer status changes to Manually connected by Mycomputer . Now
     , only your 
    computer can use the printer.
    5.  Click the  Disconnect button.
    The status changes to Available. Now all computers on the network can use the printer.
    6.  T
    o exit the utility, select System > Exit .
    Use the Shared Printer
    For each computer, after you click the Connect and Disconnect buttons once, the utility 
    automatically manages the printing queue. By default, the utility starts\
     automatically 
    whenever you log on to Windows and runs in the background.
    To manually connect and print:
    1.  Click the NETGEAR USB Control Center icon 
    .
    The main screen displays.
    2.  Click the  Connect button.
    The printer status changes to Manually connected by Mycomputer . Now only the 
    computer you are using can use this printer
     .
    3.  Use the print feature in your application to print your document.
    4.  T
    o release the printer so that all computers on the network can use it, c\
    lick the  Disconnect 
    button. 
    						
    							Share a USB Printer 90
    N900 WiFi Router 
    To print and release the printer to any computer on the network:
    1. 
    T
    o print your document, use the print feature in your application.
    The NETGEAR USB Control Center automatically connects your computer to t\
    he USB printer and prints the document. If another computer is already connecte\
    d to the printer
     , 
    your print job goes into a queue to wait to be printed.
    2.  If your document does not print, use the NETGEAR USB Control Center to c\
    heck the status. 
    See View or Change the Status of a Printer  on page
      90.
    View or Change the Status of a Printer
    To view or change the status:
    1.  Click the NETGEAR USB Control Center icon 
    .
    The Status column shows the status for each device:
    • A
    vailable. No print jobs are in progress. You can use the USB printer from any 
    computer in the network. 
    • Connected. 
     Your computer is connected to the printer and will be released when your \
    print job is done.
    • Manually Connected by . Only the connected computer can use the printer
     . 
    • W
    aiting to Connect . Your computer is not connected to the shared printer yet. 
    2.  T
    o print from your computer when the status shows Manually connected by  another 
    computer , click the  Disconnect  button.
    The printer is released from the connection and the status changes to Available.
    3.  T
    o print from your computer when the status shows Waiting to Connect, do the following:
    a.Click the Connect button.
    The printer status changes to Manually connected by Mycomputer . Now only your 
    computer can use the printer
     .
    b.  T
    o allow the printer to be shared, click the  Disconnect button.
    The printer is released from the connection and the status changes to Available. 
    						
    All Netgear manuals Comments (0)

    Related Manuals for Netgear Wndr4500v3 N900 Wifi Dual Band Gigabit Router Premium Edition User Manual