Netgear Wndr3700v5 N600 Wifi Router User Manual

Specify Your Internet Settings 21
 N600 WiFi Dual Band Gigabit Router
Use the Internet Setup Wizard
You can use the Setup Wizard to detect your Internet settings and automat\
ically set up your 
router. The Setup Wizard is not the same as the genie screens that display the f\
irst time you 
connect to your router to set it up.
To use the Setup Wizard:
1.  Launch a web browser from a computer or wireless device that is connecte\
d to the 
network.
2.  T
ype  http://www.routerlogin.net  or...

Specify Your Internet Settings 22
N600 WiFi Dual Band Gigabit Router 
Manually Set Up the Internet Connection
You can view or change the router’s Internet connection settings.
Specify an Internet Connection Without a Login
To specify the Internet connection settings:
1. 
Launch a web browser from a computer or wireless device that is connecte\
d to the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login screen displays.
3.  Enter the user name and password.
The user...

Specify Your Internet Settings 
23  N600 WiFi Dual Band Gigabit Router
•Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your ISP 
automatically assigns these addresses.
•Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP 
address that your ISP assigned. The gateway is the ISP router to which your router 
connects.
9. Select a Domain Name Server (DNS) Address radio button:
•Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your...

Specify Your Internet Settings 24
N600 WiFi Dual Band Gigabit Router 
4. 
Select  Internet .
5. For the Does your Internet connection require a login? setting, s elect the Ye s radio 
button.
The screen adjusts.
6.  In the Internet Service Provider menu, select the encapsulation method:  PPPoE or PPTP .
7.  In the Login field, enter the login name that your ISP gave you. 
This login name is often an email address.
8.  In the Password field, type the password that you use to log in to your Internet...

Specify Your Internet Settings 
25  N600 WiFi Dual Band Gigabit Router
•Use These DNS Servers. If you know that your ISP requires specific servers, select 
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary 
DNS server address is available, enter it also. 
14. Select a Router MAC Address radio button:
•Use Default Address. Use the default MAC address.
•Use Computer MAC Address. The router captures and uses the MAC address of the 
computer that you are now using. You must...

Specify Your Internet Settings 
26 N600 WiFi Dual Band Gigabit Router 
•If your Internet connection does not use PPPoe or DHCP, or is not fixed but is IPv6, 
select Auto Config. 
Your Internet service provider (ISP) can provide this information. For more information 
about IPv6 Internet connection, see the following sections:
-Use Auto Detect for an IPv6 Internet Connection on page 26
-Use Auto Config for an IPv6 Internet Connection on page 28
-Set Up an IPv6 6to4 Tunnel Internet Connection on page 29...

Specify Your Internet Settings 27
 N600 WiFi Dual Band Gigabit Router
5. 
In the Internet Connection Type  menu, select Auto Detect.
The router automatically detects the information in the following fields\
:
• Connection T
 ype. This field indicates the connection type that is detected.
• Router
’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired 
for the router’s WAN (or Internet) interface. The number after the slash (/) is the 
length of the prefix, which is also indicated by...

Specify Your Internet Settings 28
N600 WiFi Dual Band Gigabit Router 
Use Auto Config for an IPv6 Internet Connection
To set up an IPv6 Internet connection through auto configuration:
1. 
Launch a web browser from a computer or wireless device that is connecte\
d to the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login screen displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password . The user name and...

Specify Your Internet Settings 
29  N600 WiFi Dual Band Gigabit Router
7. (Optional) In the DHCP Domain Name (If Required) field, enter a domain name.
You can type the domain name of your IPv6 ISP. Do not enter the domain name for the 
IPv4 ISP here. For example, if your ISP’s mail server is mail.xxx.yyy.zzz, type xxx.yyy.zzz 
as the domain name. If your ISP provided a domain name, type it in this field. For 
example, Earthlink Cable might require a host name of home, and Comcast sometimes 
supplies a...

Specify Your Internet Settings 30
N600 WiFi Dual Band Gigabit Router 
5. 
In the Internet Connection Type menu, select 6to4 Tunnel .
The router automatically detects the information in the Router’s IPv6 Address on LAN 
field. This field shows the IPv6 address that is acquired for the router’s LAN interface. The 
number after the slash (/) is the length of the prefix, which is also \
indicated by the 
underline (_) under the IPv6 address. If no address is acquired, the f\
ield displays Not 
Available.
6....