Netgear Router WGT624 V3 User Manual

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
Content Filtering4-7
202-10090-01, April 2005 Figure 4-6:  Logs menu
Log entries are described in Table 4-1
Table 4-1. Log entry descriptions
Field Description
Number The index number of the content filter log entries. 128 entries 
are available numbered from 0 to 127. The log will keep the 
record of the latest 128 entries.
Date and Time The date and time the log entry was recorded.
Source IP The IP address of the initiating device for...

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
4-8Content Filtering
202-10090-01, April 2005
Log action buttons are described in Ta b l e  4 - 2
Table 4-2. Log action buttons
Field Description
Refresh Click this button to refresh the log screen.
Clear Log Click this button to clear the log entries.
Send Log Click this button to email the log immediately. 

Maintenance5-1
202-10090-01, April 2005
Chapter 5 
Maintenance 
This chapter describes how to use the maintenance features of your WGT624 v3 108 Mbps 
Wireless Firewall Router. These features can be found by clicking on the Maintenance heading in 
the Main Menu of the browser interface.
Viewing Wireless Router Status Information
The Router Status menu provides a limited amount of status and usage information. From the 
Main Menu of the browser interface, click on Maintenance, then select System Status to...

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
5-2Maintenance
202-10090-01, April 2005
This screen shows the following parameters:
Table 5-1. Menu 3.2 - Wireless Router Status Fields
Field Description
Account Name This field displays the Host Name assigned to the router.
Firmware Version This field displays the router firmware version.
Internet Port These parameters apply to the Internet (WAN) port of the router. 
MAC Address This field displays the Media Access Control address...

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
Maintenance5-3
202-10090-01, April 2005
Click on the “Show WAN Status” button to display the WAN status, as shown below.
Figure 5-2:  Connection Status screen
This screen shows the following statistics:.
WAN Status action buttons are described in Table 5-2
Table 5-1. Connection Status Fields 
Field Description
Connection Time The length of time the router has been connected to your Internet service provider’s 
network.
Connection Method...

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
5-4Maintenance
202-10090-01, April 2005
Click on the “Show Statistics” button to display router usage statistics, as shown below.
Figure 5-3:  Router Statistics screen
This screen shows the following statistics:
Table 5-1. Router Statistics Fields 
Field Description
Port The statistics for the WAN (Internet) and LAN (local) ports. For each port, the screen 
displays:
Status The link status of the port.
TxPkts The number of packets...

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
Maintenance5-5
202-10090-01, April 2005
Show Statistics action buttons are described in Ta b l e  5 - 2
Viewing a List of Attached Devices
The Attached Devices menu contains a table of all IP devices that the router has discovered on the 
local network. From the Main Menu of the browser interface, under the Maintenance heading, 
select Attached Devices to view the table, shown below:
Figure 5-4:  Attached Devices menu
For each device,...

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
5-6Maintenance
202-10090-01, April 2005
From the Main Menu of the browser interface, under the Maintenance heading, select the Router 
Upgrade heading to display the menu shown below. 
Figure 5-5:  Router Upgrade menu
Note: When uploading software to the WGT624 v3 wireless router, it is important not to interrupt 
the web browser by closing the window, clicking a link, or loading a new page. If the browser is 
interrupted, it may...

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
Maintenance5-7
202-10090-01, April 2005
Configuration File Management
The configuration settings of the WGT624 v3 wireless router are stored within the router in a 
configuration file. This file can be saved (backed up) to a user’s PC, retrieved (restored) from the 
user’s PC, or cleared to factory default settings.
From the Main Menu of the browser interface, under the Maintenance heading, select the Settings 
Backup heading to bring...

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
5-8Maintenance
202-10090-01, April 2005
Erasing the Configuration
It is sometimes desirable to restore the router to the factory default settings. This can be done by 
using the Erase function, which will restore all factory settings. After an erase, the routers 
password will be password, the LAN IP address will be 192.168.1.1, and the routers DHCP client 
will be enabled.
To erase the configuration, click the Erase button.
To restore...