Netgear R8000 Nighthawk X6 Ac3200 Tri Band Wifi Gigabit Router User Manual

							Manage Your Network 
141  Nighthawk X6 AC3200 Tri-Band WiFi Router
Update the Router Firmware
The router firmware (routing software) is stored in flash memory. You might see a message 
at the top of the genie screens when new firmware is available. You can respond to that 
message to update the firmware or you can check to see if new firmware is available, and to 
update your product. 
To check for new firmware and update your router:
1. Launch an Internet browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Administration > Router Update. 
The Router Update screen displays.
5. Click the Check button.
The router finds new firmware information if any is available and displays a message 
asking if you want to download and install it.
6. Click the Ye s button.
The router locates and downloads the firmware and begins the update. 
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the 
upgrade. For example, do not close the browser, click a link, or load 
a new page. Do not turn off the router.
When the upload is complete, your router restarts. The upgrade process typically takes 
about one minute. Read the new firmware release notes to find out if you need to 
reconfigure the router after upgrading. 
						

							Manage Your Network 142
Nighthawk
 X6 AC3200
 Tri-Band WiFi  Router 
Change the admin Password
This feature let you change the default password that is used to log in \
to the router with the 
user name admin. This password is not the one that you use for WiFi access.
To set the password for the user name admin:
1.  Launch an Internet browser from a computer or wireless device that is co\
nnected to the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login screen displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password . The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Select  ADV
 ANCED > Administration > Set Password .
5. Type the old password, and type the new password twice.
6.  T
o be able to recover the password, select the  Enable Password Recovery check box.
NETGEAR recommends that you enable password recovery.
7.  Click the  Apply button.
Your changes take effect. 
						

							Manage Your Network 
143  Nighthawk X6 AC3200 Tri-Band WiFi Router
Recover the admin Password
NETGEAR recommends that you enable password recovery if you change the password for 
the router user name admin. Then you can recover the password if it is forgotten. This 
recovery process is supported in Internet Explorer, Firefox, and Chrome browsers but not in 
the Safari browser.
To set up password recovery:
1. Launch an Internet browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Administration > Set Password.
The Set Password screen displays.
5. Select the Enable Password Recovery check box.
6. Select two security questions and provide answers to them.
7. Click the Apply button.
Your changes are saved.
To recover your password:
1. In the address field of your browser, type www.routerlogin.net.
A login screen displays. 
2. Click the Cancel button.
If password recovery is enabled, you are prompted to enter the serial number of the 
router.
The serial number is on the product label.
3. Enter the serial number of the router.
4. Click the Continue button.
A screen displays requesting the answers to your security questions.
5. Enter the saved answers to your security questions.  
6. Click the Continue button.
A screen displays your recovered password. 
						

							Manage Your Network 144
Nighthawk
 X6 AC3200
 Tri-Band WiFi  Router 
7. Click the  Login again  button.
A login screen displays.
8.  With your recovered password, log in to the router.
View Router Status
To view router status and usage information:
1. Launch an Internet browser from a computer or wireless device that is co\
nnected to the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login screen displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password . The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Click the  ADV
 ANCED tab. 
5.  For information about the displayed settings, click the  Show/Hide Help Center link at the 
bottom of the screen.
Display Internet Port Statistics
To display Internet port statistics:
1.  Launch an Internet browser from a computer or wireless device that is co\
nnected to the 
network. 
						

							Manage Your Network 145
 Nighthawk
 X6 AC3200  Tri-Band WiFi  Router
2. Type  http://www.routerlogin.net  or http://www.routerlogin.com .
A login screen displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password. The user name and 
password are case-sensitive.
4.  The BASIC Home screen displays
5.  Click the  ADV
 ANCED tab. 
The ADVANCED Home screen displays.
6.  In the Internet Port pane, click the Show Statistics  button.
The following information displays:
• System Up T
 ime. The time elapsed since the router was last restarted.
• Port. 
The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port, 
the screen displays the following information:
- Status. 
 The link status of the port.
- TxPkts. 
 The number of packets transmitted on this port since reset or manual 
clear.
- RxPkts. 
 The number of packets received on this port since reset or manual clear.
- Collisions. 
 The number of collisions on this port since reset or manual clear.
- Tx B/s. 
 The current transmission (outbound) bandwidth used on the WAN and 
LAN ports.
- Rx B/s . 
 The current reception (inbound) bandwidth used on the WAN and LAN 
ports.
- Up T
ime . The time elapsed since this port acquired the link.
- Poll Interval. 
 The interval at which the statistics are updated in this screen. 
7.  T
o change the polling frequency, enter a time in seconds in the  Poll Interval field and click 
the  Set Interval button. 
To stop the polling entirely, click the  Stop button. 
						

							Manage Your Network 146
Nighthawk
 X6 AC3200
 Tri-Band WiFi  Router 
Check the Internet Connection Status
To check the Internet connection status:
1. Launch an Internet browser from a computer or wireless device that is co\
nnected to the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login screen displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password . The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Click the  ADV
 ANCED tab.
The ADVANCED Home screen displays.
5.  In the Internet Port pane, click the  Connection Status button. 
The following information displays:
• IP Address. 
 The IP address that is assigned to the router.
• Subnet Mask. 
 The subnet mask that is assigned to the router.
• Default Gateway . 
 The IP address for the default gateway that the router 
communicates with.
• DHCP Server . 
 The IP address for the Dynamic Host Configuration Protocol server 
that provides the TCP/IP configuration for all the computers that are connected to the 
router.
• DNS Server . 
 The IP address of the Domain Name Service server that provides 
translation of network names to IP addresses.
• Lease Obtained. 
 The date and time when the lease was obtained.
• Lease Expires. 
 The date and time that the lease expires. 
						

							Manage Your Network 147
 Nighthawk
 X6 AC3200  Tri-Band WiFi  Router
6. To return the status of all items to 0, click the Release button. 
7.  T
o refresh the screen, click the Renew  button. 
8.  T
o exit the screen, click the Close Window button.
View and Manage Logs of Router Activity
The log is a detailed record of the websites you have accessed or attemp\
ted to access and 
other router actions. Up to 256
  entries are stored in the log. Log entries display only when 
keyword blocking is enabled and no log entries are made for the trusted \
user
 .
To view and manage logs:
1. Launch an Internet browser from a computer or wireless device that is co\
nnected to the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login screen displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Select  ADV
 ANCED > Administration > Logs.
The Logs screen shows the following information:
• Action. 
 The action that occurred, such as whether Internet access was blocked or\
 
allowed.
• Source IP . 
 The IP address of the initiating device for this log entry.
• T
arget address. The name or IP address of the website or news group visited or to 
which access was attempted. 
						

							Manage Your Network 148
Nighthawk
 X6 AC3200
 Tri-Band WiFi  Router 
•Date and time. The date and time the log entry was recorded.
5.  T
o customize the logs, scroll down and clear or select the check boxes.
To refresh the log screen, click the Refresh  button.
To clear the log entries, click the Clear Log button.
To email the log immediately, click the  Send Log button.
Monitor Internet Traffic
Traffic metering allows you to monitor the volume of Internet traffic that passes through the 
router Internet port. You can set limits for traffic volume.
To monitor Internet traffic:
1.  Launch an Internet browser from a computer or wireless device that is co\
nnected to the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login screen displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password . The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Select  ADV
 ANCED > Advanced Setup > Traffic Meter .
Scroll to view 
more settings
5. Select the  Enable Traffic Meter  check box. 
						

							Manage Your Network 
149  Nighthawk X6 AC3200 Tri-Band WiFi Router
6. (Optional) Control the volume of Internet traffic.
You can use either the traffic volume control feature or the connection time control 
feature:
•Select the Traffic volume control by radio button and then select one of the 
following options:
-No Limit. No restriction is applied when the traffic limit is reached.
-Download only. The restriction is applied to incoming traffic only.
-Both Directions. The restriction is applied to both incoming and outgoing traffic.
•Select the Connection time control radio button and enter the allowed hours in the 
Monthly limit field.
7. (Optional) If your ISP charges for extra data volume when you make a new connection, 
enter the extra data volume in MB in the Round up data volume for each connection by 
field.
8. In the Traffic Counter section, set the traffic counter to begin at a specific time and date.
If you want the traffic counter to start immediately, click the Restart Counter Now button.
9. In the Traffic Control section, specify whether the router should issue a warning message 
before the monthly limit of Mbytes or hours is reached. 
By default, the value is 0 and no warning message is issued. You can select one of the 
following to occur when the limit is attained:
•The Internet LED blinks white or amber. 
•The Internet connection is disconnected and disabled.
10. Click the Apply button.
The Internet Traffic Statistics section helps you to monitor the data traffic.
11. To update the Traffic Statistics section, click the Refresh button.
12. To display more information about the data traffic on your router and to change the poll 
interval, click the Traffic Status button.
Custom Static Routes
Typically, you do not need to add static routes unless you have multiple routers or multiple IP 
subnets on your network.
As an example of when a static route is needed, consider the following case:
•Your main Internet access is through a cable modem to an ISP.
•You have an ISDN router on your home network for connecting to the company where 
you are employed. This router’s address on your LAN is 192.168.1.100.
•Your company’s network address is 134.177.0.0.
When you set up your router, two implicit static routes were created. A default route was 
created with your ISP as the gateway, and a second static route was created to your local  
						

							Manage Your Network 150
Nighthawk
 X6 AC3200
 Tri-Band WiFi  Router 
network for all 192.168.1.x addresses. With this configuration, if you t\
ry to access a device on 
the 134.177.0.0 network, your router forwards your request to the ISP. The ISP forwards your 
request to the company where you are employed, and the company firewall \
is likely to deny 
the request.
In this case you must define a static route, telling your router to acce\
ss 134.177.0.0 through 
the ISDN router at 192.168.1.100. Here is an example:
•The Destination IP 
 Address and IP Subnet Mask fields specify that this static route 
applies to all 134.177.x.x addresses. 
• The Gateway IP 
 Address field specifies that all traffic for these addresses will be 
forwarded to the ISDN router at 192.168.1.100. 
• A metric value of 1 works because the ISDN router is on the LAN. 
• Private is selected only as a precautionary security measure in case RIP is act\
ivated.
Set Up a Static Route
To set up a static route:
1. Launch an Internet browser from a computer or wireless device that is co\
nnected to the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login screen displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password . The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Select  ADV
 ANCED > Advanced Setup > Static Routes .
The Static Routes screen displays.
5.  Click the  Add button.
The screen adjusts.
6.  In the Route Name field, type a name for this static route (for identification purposes \
only.) 
7.  Select the  Private check box if you want to limit access to the LAN only
 .