Netgear R7800 Nighthawk X4s Ac2600 Smart Wifi Router User Manual

							Many broadband ISPs restrict access by allowing traffic only from the MAC address of your broadband modem.
Some ISPs additionally restrict access to the MAC address of a single computer connected to that modem. If
your ISP does this, configure your router to “clone” or “spoof” the MAC address from the authorized computer.
Troubleshooting
181
Nighthawk X4S AC2600 Smart WiFi Router 
						

							15
Supplemental Information
This appendix includes technical information about your router.
The appendix covers the following topics:
•Factory Settings on page 183
•Technical Specifications on page 184
182 
						

							Factory Settings
You can return the router to its factory settings. Use the end of a paper clip or a similar object to press and hold the
Reset button on the back of the router for at least seven seconds.The router resets and returns to the factory
configuration settings shown in the following table.
Table 3. Factory default settings
Default SettingFeature
www.routerlogin.com or www.routerlogin.netUser login URLRouter login
adminUser name (case-sensitive)
passwordLogin password (case-sensitive)
Use default hardware addressWAN MAC addressInternet connection
1500WAN MTU size
AutoSensingPort speed
192.168.1.1LAN IPLocal network (LAN)
255.255.255.0Subnet mask
EnabledDHCP server
192.168.1.2 to 192.168.1.254DHCP range
Pacific timeTime zone
192.168.1.2DHCP starting IP address
192.168.1.254DHCP ending IP address
DisabledDMZ
DisabledTime adjusted for daylight saving time
DisabledSNMP
Disabled (except traffic on port 80, the HTTP port)Inbound (communications coming in from
the Internet)
Firewall
Enabled (all)Outbound (communications going out to
the Internet)
DisabledSource MAC filtering
Supplemental Information
183
Nighthawk X4S AC2600 Smart WiFi Router 
						

							Default SettingFeature
EnabledWireless communicationWireless
See router labelSSID name
WPA2-PSK (AES)Security
EnabledBroadcast SSID
Auto1Transmission speed
United States in the US; otherwise, varies by regionCountry/region
Auto for 2.4GHz, CH 44 for WW SKU and CH 153 for North
America SKU
RF channel
Up to 600 Mbps at 2.4 GHz, 1733 Mbps at 5 GHzOperating mode
1Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.
Technical Specifications
Table 4. R7800 router specifications
DescriptionFeature
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, UPnP, and SMBData and routing protocols
•North America: 100-240V, 50/60 Hz input
•UK, Australia: 100-240V, 50/60 Hz, input
•Europe: 100-240V, 50/60 Hz input
•All regions (output): 12V/3.5A DC output
Power adapter
11.22 x 7.26 x 1.97 in. (285 x 184.5 x 50 mm)Dimensions
1.65 lb (750 g)Weight
0° to 40°C  (32º to 104ºF)Operating temperature
90% maximum relative humidity, noncondensingOperating humidity
Supplemental Information
184
Nighthawk X4S AC2600 Smart WiFi Router 
						

							DescriptionFeature
FCC Part 15 Class B
EN 55 022 (CISPR 22), Class B C-Tick N10947
Electromagnetic emissions
10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45LAN
10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45WAN
Maximum WiFi signal rate complies with the IEEE 802.11 standard.2Wireless
Auto Rate SensingRadio data rates
•IEEE® 802.11 b/g/n 2.4 GHz–256 QAM support
•IEEE® 802.11 a/n/ac 5.0 GHz
Data encoding standards
Limited by the amount of WiFi network traffic generated by each node (typically 50–70
nodes).
Maximum computers per WiFi network
AC2600 WiFi3
•800 Mbps @2.4GHz–256 QAM
•1733 Mbps @5 GHz 11ac
Operating frequency range
WPA2-PSK and WPA/WPA2802.11 security
2Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.
3 NETGEAR makes no express or implied representations or warranties about this product’s compatibility with any future standards.
802.11ac 1733 Mbps is approximately 4x faster than 802.11n 450 Mbps. 2.4 GHz Performance Mode requires 256 QAM support on
the WiFi client. Up to 1733 Mbps wireless speeds achieved when connecting to other 802.11ac 1733 Mbps devices.
Supplemental Information
185
Nighthawk X4S AC2600 Smart WiFi Router