Home > Netgear > Router > Netgear R7800 Nighthawk X4s Ac2600 Smart Wifi Router User Manual

Netgear R7800 Nighthawk X4s Ac2600 Smart Wifi Router User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Netgear R7800 Nighthawk X4s Ac2600 Smart Wifi Router User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 137 Netgear manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							6.Change the settings in the fields as needed.
    7.Click the Apply button.
    Your changes are saved.
    Safely Remove a USB Device
    Before you physically disconnect a USB device from the router USB port, log in to the router and take the drive
    offline.
    To remove a USB disk drive safely:
    1.Launch a web browser from a computer or WiFi device that is connected to the network.
    2.Enterhttp://www.routerlogin.net.
    A login window opens.
    3.Enter the router user name and password.
    The user name is admin.The default password is password.The user name and password are case-sensitive.
    The BASIC Home page displays.
    4.Select USB Storage > Basic Settings.
    The USB Settings page displays.
    5.Click the Safely Remove USB Device button.
    This takes the device offline.
    6.Physically disconnect the USB device.
    Share USB Storage Devices Attached to the Router
    121
    Nighthawk X4S AC2600 Smart WiFi Router 
    						
    							9
    Use Dynamic DNS to Access USB Storage
    Devices Through the Internet
    With Dynamic DNS, you can use the Internet to access USB devices attached to the router’s USB ports when you’re
    not home.
    This chapter includes the following sections:
    •Set Up and Manage Dynamic DNS on page 123
    •Set Up FTP Access Through the Internet on page 123
    •Your Personal FTP Server on page 124
    •Access USB Storage Devices Through the Internet on page 129
    •Remotely Access a USB Device Using ReadyCLOUD on page 129
    •Download Files Onto a USB Storage Device on page 132
    •View Photos on Your USB Device With Kwilt on page 135
    For information about how to connect the device and specify its settings, see Share USB Storage Devices Attached to
    the Router on page 110.
    122 
    						
    							Set Up and Manage Dynamic DNS
    Internet service providers (ISPs) assign numbers called IP addresses to identify each Internet account. Most ISPs
    use dynamically assigned IP addresses.This means that the IP address can change at any time.You can use the
    IP address to access your network remotely, but most people don’t know what their IP addresses are or when this
    number changes.
    To make it easier to connect, you can get a free account with a Dynamic DNS service that lets you use a domain
    name to access your home network.To use this account, you must set up the router to use Dynamic DNS.Then
    the router notifies the Dynamic DNS service provider whenever its IP address changes.When you access your
    Dynamic DNS account, the service finds the current IP address of your home network and automatically connects
    you.
    If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), the Dynamic DNS service does not
    work because private addresses are not routed on the Internet.
    Set Up FTP Access Through the Internet
    To set up FTP access:
    1.Launch a web browser from a computer or WiFi device that is connected to the network.
    2.Enter http://www.routerlogin.net.
    A login window opens.
    3.Enter the router user name and password.
    The user name is admin.The default password is password.The user name and password are case-sensitive.
    The BASIC Home page displays.
    4.Select ADVANCED > ReadySHARE > Advanced Settings.
    The ReadySHARE Advanced Settings page displays.
    5.Select the FTP (via Internet) check box.
    6.Click the Apply button.
    Your changes are saved.
    7.To limit access to the admin user, click the Edit button.
    The Edit page displays.
    8.In the Read Access list, select admin.
    9.In the Write Access list, select admin.
    10.Click the Apply button.
    Your settings are saved.
    Use Dynamic DNS to Access USB Storage Devices Through the Internet
    123
    Nighthawk X4S AC2600 Smart WiFi Router 
    						
    							Your Personal FTP Server
    With your customized free URL, you can use FTP to access your network when you aren’t home through Dynamic
    DNS.To set up your FTP server, you must register for a NETGEAR Dynamic DNS (DDNS) service account and
    specify the account settings. See Set Up a New Dynamic DNS Account on page 125.
    Figure 11.You can access your network through the Internet when you’re not home
    The router supports only basic DDNS, and the login and password might not be secure.You can
    use DDNS with a VPN tunnel for a secure connection.
    Note
    Set Up Your Personal FTP Server
    To set up your personal account and use FTP:
    1.Get your NETGEAR Dynamic DNS domain name.
    For more information, see Your Personal FTP Server on page 124.
    2.Make sure that your Internet connection is working.
    Use Dynamic DNS to Access USB Storage Devices Through the Internet
    124
    Nighthawk X4S AC2600 Smart WiFi Router 
    						
    							Your router must use a direct Internet connection. It cannot connect to a different router to access the Internet.
    3.Connect a storage device to the router.
    4.If your USB device uses a power supply, connect it.
    You must use the power supply when you connect the USB device to the router.
    When you connect the USB device to the router USB port, it might take up to two minutes before it is ready for
    sharing. By default, the USB device is available to all computers on your local area network (LAN).
    5.Set up FTP access in the router.
    See Set Up FTP Access Through the Internet on page 123.
    6.On a remote computer with Internet access, you can use FTP to access your router using
    ftp://yourname.mynetgear.com.
    Set Up a New Dynamic DNS Account
    To set up Dynamic DNS and register for a free NETGEAR account:
    1.Launch a web browser from a computer or WiFi device that is connected to the network.
    2.Enter http://www.routerlogin.net.
    A login window opens.
    3.Enter the router user name and password.
    The user name is admin.The default password is password.The user name and password are case-sensitive.
    The BASIC Home page displays.
    Use Dynamic DNS to Access USB Storage Devices Through the Internet
    125
    Nighthawk X4S AC2600 Smart WiFi Router 
    						
    							4.Select ADVANCED > Advanced Setup > Dynamic DNS.
    5.Select the Use a Dynamic DNS Service check box.
    6.From the Service Provider menu, select NETGEAR.
    You can select another service provider.
    7.Select the No radio button.
    8.In the Host Name field, type the name that you want to use for your URL.
    The host name is sometimes called the domain name.Your free URL includes the host name that you specify
    and ends with mynetgear.com. For example, specify MyName.mynetgear.com.
    9.In the Email field, type the email address for your account.
    10.In the Password (6-32 characters) field, type the password for your account.
    11.Click the Register button.
    12.Follow the onscreen instructions to register for your NETGEAR Dynamic DNS service.
    Specify a DNS Account That You Already Created
    If you already created a Dynamic DNS account with NETGEAR, No-IP, or Dyn, you can set up the router to use
    your account.
    To set up Dynamic DNS if you already created an account:
    1.Launch a web browser from a computer or WiFi device that is connected to the network.
    2.Enter http://www.routerlogin.net.
    A login window opens.
    Use Dynamic DNS to Access USB Storage Devices Through the Internet
    126
    Nighthawk X4S AC2600 Smart WiFi Router 
    						
    							3.Enter the router user name and password.
    The user name is admin.The default password is password.The user name and password are case-sensitive.
    The BASIC Home page displays.
    4.Select ADVANCED > Advanced Setup > Dynamic DNS.
    5.Select the Use a Dynamic DNS Service check box.
    6.From the Service Provider menu, select your provider.
    7.Select the Yes radio button.
    The page adjusts and displays the Show Status, Cancel, and Apply buttons.
    8.In the Host Name field, type the host name (sometimes called the domain name) for your account.
    9.For a No-IP or Dyn account, in the User Name field, type the user name for your account.
    10.For a NETGEAR account at No-IP, in the Email field, type the email address for your account.
    11.In the Password (6-32 characters) field, type the password for your DDNS account.
    12.Click the Apply button.
    Your settings are saved.
    13.To verify that your Dynamic DNS service is enabled in the router, click the Show Status button.
    A message displays the Dynamic DNS status.
    Change the Dynamic DNS Settings
    You can change the settings for your Dynamic DNS account.
    Use Dynamic DNS to Access USB Storage Devices Through the Internet
    127
    Nighthawk X4S AC2600 Smart WiFi Router 
    						
    							To change your settings:
    1.Launch a web browser from a computer or WiFi device that is connected to the network.
    2.Enter http://www.routerlogin.net.
    A login window opens.
    3.Enter the router user name and password.
    The user name is admin.The default password is password.The user name and password are case-sensitive.
    The BASIC Home page displays.
    4.Select ADVANCED > Advanced Setup > Dynamic DNS.
    The Dynamic DNS page displays.
    5.Change your DDNS account settings as necessary.
    6.Click the Apply button.
    Your settings are saved.
    Use Dynamic DNS to Access USB Storage Devices Through the Internet
    128
    Nighthawk X4S AC2600 Smart WiFi Router 
    						
    							Access USB Storage Devices Through the Internet
    You can access USB storage devices through the Internet when you’re not home.
    To access devices from a remote computer:
    1.Launch a web browser on a computer that is not on your home network.
    2.Connect to your home router:
    •To connect with Dynamic DNS, type the DNS name.
    To use a Dynamic DNS account, you must enter the account information on the Dynamic DNS page. See
    Set Up and Manage Dynamic DNS on page 123.
    •To connect without Dynamic DNS, type the router’s Internet port IP address.
    You can view the router’s Internet IP address on the BASIC Home page.
    You can use FTP to share files on a USB device connected to the router.
    Remotely Access a USB Device Using ReadyCLOUD
    NETGEAR ReadyCLOUD for routers lets you remotely access files stored on a USB storage device that is connected
    to the router. Before you can use ReadyCLOUD, you must create a ReadyCLOUD account and register your router.
    A ReadyCLOUD app is also available for Windows computers, Android mobile devices, and iOS mobile devices.
    For more information about setting up ReadyCLOUD, see the ReadyCLOUD for Routers User Manual, which is
    available online at downloadcenter.netgear.com.
    Create a ReadyCLOUD Account
    To create a ReadyCLOUD account:
    1.Launch a web browser from a computer or WiFi device.
    2.Visit readycloud.netgear.com.
    The ReadyCLOUD Welcome page displays.
    3.Click the Sign In link.
    The Sign In page displays.
    Use Dynamic DNS to Access USB Storage Devices Through the Internet
    129
    Nighthawk X4S AC2600 Smart WiFi Router 
    						
    							4.Click the Create Account link.
    5.Complete the fields to set up your account, and click the Create button.
    You are now ready to register your router with your ReadyCLOUD account.
    Register Your Router With ReadyCLOUD
    After you create a ReadyCLOUD account, you must register your router with your ReadyCLOUD account.
    To register your router with your ReadyCLOUD account:
    1.Visit kb.netgear.com/app/answers/detail/a_id/27323/ and check to see if you router supports ReadyCLOUD.
    2.Connect a USB storage device to a USB port on the router.
    If your USB storage device uses a power supply, you must use it when you connect the USB storage device to
    the router.
    When you connect the USB storage device to the router’s USB port, it might take up to two minutes before it is
    ready for sharing. By default, the USB storage device is available to all computers on your local area network
    (LAN).
    3.Launch a web browser from a computer or WiFi device that is connected to the network.
    4.Enter http://www.routerlogin.net.
    A login window opens.
    5.Enter the router user name and password.
    The user name is admin.The default password is password.The user name and password are case-sensitive.
    The BASIC Home page displays.
    Use Dynamic DNS to Access USB Storage Devices Through the Internet
    130
    Nighthawk X4S AC2600 Smart WiFi Router 
    						
    All Netgear manuals Comments (0)

    Related Manuals for Netgear R7800 Nighthawk X4s Ac2600 Smart Wifi Router User Manual