Netgear R7500v2 Nighthawk Dual Band Gigabit Wireless Router 802 11ac User Manual

							Factory Settings
You can return the router to its factory settings. Use the end of a paper clip or a similar object to press
and hold the Reset button on the back of the router for at least seven seconds.The router resets and
returns to the factory configuration settings shown in the following table.
Table 3. Factory default settings
Default BehaviorFeature
www.routerlogin.com or www.routerlogin.netUser login URLRouter
login
adminUser name (case-sensitive)
passwordLogin password (case-sensitive)
Use default hardware addressWAN MAC addressInternet
connection
1500WAN MTU size
AutoSensingPort speed
192.168.1.1LAN IPLocal
network
(LAN)255.255.255.0Subnet mask
EnabledDHCP server
192.168.1.2 to 192.168.1.254DHCP range
Pacific timeTime zone
192.168.1.2DHCP starting IP address
192.168.1.254DHCP ending IP address
DisabledDMZ
DisabledTime adjusted for daylight saving time
DisabledSNMP
Disabled (except traffic on port 80, the HTTP
port)
Inbound (communications coming in from
the Internet)
Firewall
Supplemental Information
181 
						

							Default BehaviorFeature
Enabled (all)Outbound (communications going out to
the Internet)
DisabledSource MAC filtering
EnabledWireless communicationWireless
See router labelSSID name
WPA2-PSK (AES)Security
EnabledBroadcast SSID
Auto1Transmission speed
United States in the US; otherwise, varies
by region
Country/region
Auto for 2.4GHz, CH 44 for WW SKU and
CH 153 for North America SKU
RF channel
Up to 600 Mbps at 2.4 GHz, 1733 Mbps at
5 GHz
Operating mode
1Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.
Technical Specifications
Table 4. R7500v2 router specifications
DescriptionFeature
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS,
UPnP, and SMB
Data and routing protocols
Supplemental Information
182 
						

							DescriptionFeature
Power adapter•North America: 100-240V, 50/60 Hz input
•UK, Australia: 100-240V, 50/60 Hz, input
•Europe: 100-240V, 50/60 Hz input
•All regions (output): 12V/3.5A DC output
11.22 x 7.26 x 1.97 in. (285 x 184.5 x 50 mm)Dimensions
1.65 lb (750 g)Weight
0° to 40°C  (32º to 104ºF)Operating temperature
90% maximum relative humidity, noncondensingOperating humidity
FCC Part 15 Class BElectromagnetic emissions
VCCI Class B
EN 55 022 (CISPR 22), Class B C-Tick N10947
10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45LAN
10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45WAN
Maximum wireless signal rate complies with the IEEE 802.11
standard.2Wireless
Auto Rate SensingRadio data rates
Data encoding standards•IEEE® 802.11 b/g/n 2.4 GHz–256 QAM support
•IEEE® 802.11 a/n/ac 5.0 GHz
Limited by the amount of wireless network traffic generated by each
node (typically 50–70 nodes).
Maximum computers per wireless
network
AC2350 WiFi3Operating frequency range
Supplemental Information
183 
						

							DescriptionFeature
•600 Mbps @2.4GHz–256 QAM
•1733 Mbps @5 GHz 11ac
WPA2-PSK and WPA/WPA2802.11 security
2Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.
3 NETGEAR makes no express or implied representations or warranties about this product’s compatibility with any future standards.
802.11ac 1733 Mbps is approximately 4x faster than 802.11n 450 Mbps. 2.4 GHz Performance Mode requires 256 QAM support on
the WiFi client. Up to 1733 Mbps wireless speeds achieved when connecting to other 802.11ac 1733 Mbps devices.
Supplemental Information
184