Netgear Prosafe 8 Port Manual
Have a look at the manual Netgear Prosafe 8 Port Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 137 Netgear manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 67
Manage the Switch 67
ProSAFE 8-Port and 16-Port Gigabit Click Switch
8.
In the Source Port table, select the check box for the source port.
9. In the Destination Port menu, select the destination port.
10. Click the APPL
Y button.
Your settings are saved.
Use Browser-Based Access to Enable Port Mirroring
To enable port mirroring:
1. Set up your computer to use an IP address in the same subnet as the IP a\
ddress of the
switch.
2. Use an Ethernet cable to connect your computer to an Ethernet...](http://img.usermanuals.tech/thumb/55/104975/w64_prosafe-8-port-manual-1526557021_d-66.png "Page 67
Manage the Switch 67
ProSAFE 8-Port and 16-Port Gigabit Click Switch
8.
In the Source Port table, select the check box for the source port.
9. In the Destination Port menu, select the destination port.
10. Click the APPL
Y button.
Your settings are saved.
Use Browser-Based Access to Enable Port Mirroring
To enable port mirroring:
1. Set up your computer to use an IP address in the same subnet as the IP a\
ddress of the
switch.
2. Use an Ethernet cable to connect your computer to an Ethernet...")
![Page 71
Diagnostics and Troubleshooting 71
ProSAFE 8-Port and 16-Port Gigabit Click Switch
The Switch Information screen displays.
6. Select System > Monitoring > Cable T
ester.
7. Select one or more check boxes.
8. Click the T
est Selected Port button.
The switch tests the cable connection for the selected port and displays\
the results.
Resolve a Subnet Conflict to Access the Switch
If you power on the switch before you connect it to a network that inclu\
des a DHCP server,
the switch uses its own...](http://img.usermanuals.tech/thumb/55/104975/w64_prosafe-8-port-manual-1526557021_d-70.png "Page 71
Diagnostics and Troubleshooting 71
ProSAFE 8-Port and 16-Port Gigabit Click Switch
The Switch Information screen displays.
6. Select System > Monitoring > Cable T
ester.
7. Select one or more check boxes.
8. Click the T
est Selected Port button.
The switch tests the cable connection for the selected port and displays\
the results.
Resolve a Subnet Conflict to Access the Switch
If you power on the switch before you connect it to a network that inclu\
des a DHCP server,
the switch uses its own...")
![Page 73
Supplemental Information73
ProSAFE 8-Port and 16-Port Gigabit Click Switch
Factory Default Settings
You can return the switch to its factory settings. Use the end of a paper\
clip or some other
similar object to press and hold the
/Factory Defaults button on the back panel of the switch
for at least four seconds. The switch resets, and returns to the factory settings that are shown
in the following table.
Table 2. Factory default settings
Factory Default SettingGSS108EGSS116E
Switch name N/A...](http://img.usermanuals.tech/thumb/55/104975/w64_prosafe-8-port-manual-1526557021_d-72.png "Page 73
Supplemental Information73
ProSAFE 8-Port and 16-Port Gigabit Click Switch
Factory Default Settings
You can return the switch to its factory settings. Use the end of a paper\
clip or some other
similar object to press and hold the
/Factory Defaults button on the back panel of the switch
for at least four seconds. The switch resets, and returns to the factory settings that are shown
in the following table.
Table 2. Factory default settings
Factory Default SettingGSS108EGSS116E
Switch name N/A...")
Diagnostics and Troubleshooting 71 ProSAFE 8-Port and 16-Port Gigabit Click Switch The Switch Information screen displays. 6. Select System > Monitoring > Cable T ester. 7. Select one or more check boxes. 8. Click the T est Selected Port button. The switch tests the cable connection for the selected port and displays\ the results. Resolve a Subnet Conflict to Access the Switch If you power on the switch before you connect it to a network that inclu\ des a DHCP server, the switch uses its own default IP address of 192.168.0.239. This subnet might be different from the subnet used in your network. You might see the following message if you try to use the ProSAFE utility to access the switch: The switch and manager IP address are not in the same subnet. To fix this subnet conflict: 1. Disconnect the Ethernet cable between the switch and your network. 2. Unplug the switch’ s power cord. 3. Reconnect the Ethernet cable between the switch and your network. 4. Plug the switch’ s power cord into an electrical outlet. The switch powers on. The network DCHP server discovers the switch and assigns it an IP address that is in the correct subnet for the network.
72 A A. Supplemental Information This appendix covers the following topics: •Factory Default Settings •Technical Specifications
Supplemental Information73 ProSAFE 8-Port and 16-Port Gigabit Click Switch Factory Default Settings You can return the switch to its factory settings. Use the end of a paper\ clip or some other similar object to press and hold the /Factory Defaults button on the back panel of the switch for at least four seconds. The switch resets, and returns to the factory settings that are shown in the following table. Table 2. Factory default settings Factory Default SettingGSS108EGSS116E Switch name N/A (empty)N/A (empty) Switch password passwordpassword IP address 192.168.0.239192.168.0.239 Subnet mask 255.255.255.0255.255.255.0 Gateway address 192.168.0.254192.168.0.254 DHCP mode EnabledEnabled Port mirroring DisabledDisabled Loop detection DisabledDisabled IGMP snooping EnabledEnabled Port LED control Link speed and activityLink speed and activity LAG N/ADisabled VLAN DisabledDisabled QoS 802.1p/DSCP based802.1p/DSCP based Rate limit DisabledDisabled Broadcast filtering DisabledDisabled Port mode Auto negotiation Auto negotiation Flow control DisabledDisabled
Supplemental Information 74 ProSAFE 8-Port and 16-Port Gigabit Click Switch Technical Specifications Table 3. Technical specifications SpecificationGSS108EGSS116E Network interface RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-TRJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-T Network cable Category 5e (Cat 5e) or better Ethernet cableCategory 5e (Cat 5e) or better Ethernet cable Ethernet ports 8 16 USB ports (provides power only)2– USB power 10W maximum per port 15 maximum total– Power 100–240 VAC 50/60Hz, 1.0A maximum100–240 VAC 50/60Hz, 0.5A maximum Power consumption 20.14W maximum 8.36W maximum Weight 0.43 kg (0.94 lb) 1.3 kg (2.64 lb) Dimensions (W X D x H) 305 mm x 65 mm x 36 mm 12 in. x 2.54 in. x 1.39 in.407 mm x 70 mm x 36 mm 16.02 in. x 2.7 in. x 1.39 in Operating temperature 0–40°C (32–104°F) 0–40°C (32–104°F) Operating humidity 0%–90% relative humidity, noncondensing0%–90% relative humidity, noncondensing Electromagnetic CE Class B, FCC Class B, VCCI Class B, RCM Class BCE Class B, FCC Class B, VCCI Class B, RCM Class B Safety agency approvals CE mark, CB CE mark, CB