Netgear N 600 Manual

Advanced Settings91
 N600 Wireless Dual Band Router WNDR3400v2
6. 
Click  Add Service  to display the following screen: 
7. In the Service Name field, type a descriptive service name. 
8.  In the Service 
 User list, select Any (the default) to allow this service to be used by any 
computer on the Internet. Otherwise, select  Single address, and enter the IP address of 
one computer to restrict the service to a particular computer. 
9.  Select 
the service type, either  TCP or UDP  or both ( TCP/UDP). If...

Advanced Settings92
N600 Wireless Dual Band Router WNDR3400v2 
host name that you configure in the router. Then, whenever your ISP-assigned IP address 
changes, your router automatically contacts t
he Dynamic DNS service provider, logs in to 
your account, and registers your new IP addr ess. If your host name is hostname, for 
example, you can reach your router at  http://hostname.dyndns.org.
On the Advanced tab, select  Advanc
 ed Setup > Dynamic DNS to display the following 
screen:
Figure 5. Forward...

Advanced Settings
93  N600 Wireless Dual Band Router WNDR3400v2
Static Routes
Static routes provide additional routing information to your router. Under usual 
circumstances, the router has adequate routing information after it has been configured for 
Internet access, and you do not need to configure additional static routes. You have to 
configure static routes only for unusual cases such as multiple routers or multiple IP subnets 
located on your network.
As an example of when a static route is...

Advanced Settings94
N600 Wireless Dual Band Router WNDR3400v2 
To set up a static route:
1. 
Select  Advanced > Advanced Setup > Static Routes , and click Add to display the 
following screen:
2.  In the Route Name field, type a name for this static route (for identification purposes only.) 
3.  Select the  Priva
 te check box if you want to limit access to the LAN only. If Private is 
selected, the static route is not reported in RIP. 
4.  Select the  Active check box to make this 
 route effective....

Advanced Settings95
 N600 Wireless Dual Band Router WNDR3400v2
Remote Management
The remote management feature lets you upgrade or check the status of your N600 Wireless 
Dual Band Router over the Internet.
To set up remote management:
1. 
Select  Adv
 anced > Advanced Setup > Remote Management . 
Note: Be sure to change the router’s default login password to a secure 
p
assword. The ideal password should contain no dictionary words from any 
language and contain uppercase and lowercase letters,...

Advanced Settings
96 N600 Wireless Dual Band Router WNDR3400v2 
Normal web browser access uses the standard HTTP service port 80. For greater 
security, enter a custom port number for the remote web management interface. Choose 
a number between 1024 and 65535, but do not use the number of any common service 
port. The default is 8080, which is a common alternate for HTTP.
5. Click Apply to have your changes take effect.
6. When accessing your router from the Internet, type your router’s WAN IP address...

Advanced Settings97
 N600 Wireless Dual Band Router WNDR3400v2
To turn on Universal Plug and Play:
1. 
Select  Advanced > Advanced Setup >  UPnP . The UPnP screen displays. 
2. The available settings and information in this screen are:
Tu r n  U P n P  O n . UPn
 P can be enabled or disabled for automatic device configuration. 
The default setting for UPnP is disabled. If this check box is not selected, the router does 
not allow any device to automatically control the resources, such as port forwarding...

Advanced Settings98
N600 Wireless Dual Band Router WNDR3400v2 
IPv6
You can use this feature to set up an IPv6 In
ternet connection type if NETGEAR genie does 
not detect it automatically.
To set up an IPv6 Internet connection type:
1.  Select  Advance
 d > Advanced Setup > IPv6  to display the following screen:
2. Select the IPv6 connection type from the list. Your  Internet service provider (ISP) can provide 
this information.
•      If your I
 SP did not provide details, you can select  IPv6 Tunnel....

Advanced Settings99
 N600 Wireless Dual Band Router WNDR3400v2
To monitor Internet traffic:
1. 
Click  Advanced > Advanced Setup > Traffic Meter  to display the following screen:
Scroll to 
view more 
settings
2. To enable the Traffic Meter, select the  Enable Traffic Meter check box.
3.  If you would
  like to record and restrict the volume of Internet traffic, select the  Traffic 
volume control  by radio button. You can select one of the following options for controlling 
the traffic volume:
•...

100
9
9.   Tro ub l e s h o ot i n g
This chapter provides information to help you diagnose and solve problems you might have with 
your router. If you do not find the solution here, visit the NETGEAR support site at 
http://support.netgear.com for product and contact information.
This chapter contains the following sections:
•     Quick Tips 
•     Troubleshooting with the LEDs 
•     Cannot Log in to the Router 
•     Cannot Access the Internet 
•     Changes Not Saved 
•     Incorrect Date or Time 
•...