Netgear Ex6200v2 Ac1200 Wifi Range Extender 802 11ac Dual Band Gigabit User Manual

71
9
9.   FAQs and Troubleshooting
This chapter covers the following topics: 
•FAQs
•Cannot Connect to the Extender
•Cannot Join a WiFi Network and Receive an Error Message 

FAQs and Troubleshooting 72
AC1200 WiFi Range Extender 
FAQs
This section provides answers for difficulties you might experience with the extender.
The web browser setup guide keeps asking me for my network password (pa\
ssphrase) 
or security key
 , and I am sure that I entered the correct password. What can I do?
The extender is probably placed at the borderline of the range covered b\
y the router or  access point. 
 To improve your signal strength, move your extender closer to your router\
 and 
make...

FAQs and Troubleshooting 
73  AC1200 WiFi Range Extender
For more information about how to reset the extender, see Return the Extender to Its 
Factory Default Settings on page 48.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
The login window opens.
4. Click the NEW EXTENDER SETUP button.
The Create Account page displays.
5. Complete the fields to set up your user name and password.
My router security is WEP, and I entered the wrong passphrase or security key on...

FAQs and Troubleshooting 
74 AC1200 WiFi Range Extender 
•It is possible that you typed the network name, passphrase, or key incorrectly. Use Smart 
Setup (see 
Run Smart Setup on page 23) to select a WiFi network and retype the 
passphrase or key. The passphrase or key is case-sensitive. For example, 
PASSWORD25 is not the same as Password25 or password25.
•If the extender cannot detect your WiFi network, check to see if your WiFi network is still 
working. Make sure that the WiFi router is turned on....

75
A
A.   Factory Settings and Technical 
Specifications
This appendix covers the following topics: 
•Factory Default Settings
•Technical and Environmental Specifications 

 Factory Settings and Technical Specifications76
AC1200 WiFi Range Extender 
Factory Default Settings
To reset the extender to factory default settings, you can use either the\
 Restore Factory 
Settings button on the rear panel or the Erase function. For more information, s\
ee  Return the 
Extender to Its Factory Default Settings on page  48.
The following table shows the factory default settings.
Table 3.  Factory default settings  
Factory Settings
Smart Setup Enabled
WiFi WiFi communication Enabled...

 Factory Settings and Technical Specifications77
 AC1200 WiFi Range Extender
Technical and Environmental Specifications
The following table shows the technical and environmental specifications\
.
Table 4.  Technical specifications
 
Technical Specifications 
Network protocol and 
standards compatibility Data and routing protocols: TCP/IP, DHCP server and client, DNS relay, NAT 
(many-to-one), VPN pass-through (IPSec, PPTP)
Power adapter • North 
America (input): 120V, 60 Hz
• All regions (output): 12 VDC...