Netgear Dgnd4000 N750 Wireless Dual Band Gigabit Adsl2 Plus Modem Router User Manual

Advanced Settings 
121  N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000
3. In the Route Name field, type a name for this static route (for identification purposes only).
4. Select the Private check box if you want to limit access to the LAN only. If Private is 
selected, the static route is not reported in RIP. 
5. Select the Active check box to make this route effective. 
6. Type the IP address of the final destination. 
7. Type the IP subnet mask for this destination. If the destination is a...

Advanced Settings 122
N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000 
Remote Management
The remote management feature lets you upgrade or check the status of yo\
ur N750 Modem 
Router over the Internet.
To set up remote management:
1. 
Select  ADV
 ANCED > Advanced Setup > Remote Management . 
Note:Be sure to change the wireless modem router’s default login password \
to a very secure password. The ideal password should contain no 
dictionary words from any language and contain uppercase...

Advanced Settings 
123  N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000
Normal web browser access uses the standard HTTP service port 80. For greater 
security, enter a custom port number for the remote web management interface. Choose 
a number from 1024 through 65535, but do not use the number of any common service 
port. The default is 8080, which is a common alternate for HTTP.
5. Click Apply to have your changes take effect.
6. When accessing your wireless modem router from the Internet,...

Advanced Settings 124
N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000 
To turn on Universal Plug and Play:
1. 
Select  ADV
 ANCED > Advanced Setup >  UPnP . 
2. The available settings and information in this screen are:
Turn UPnP On. UPnP can be enabled or disabled for automatic device configuration. 
The default setting for UPnP is disabled. If this check box is not selec\
ted, the wireless  modem router does not allow any device to automatically control the reso\
urces, such as 
port...

Advanced Settings 125
 N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000
IPv6
You can use this feature to set up an IPv6 Internet connection type if NE\
TGEAR genie does 
not detect it automatically.
To set up an IPv6 Internet connection type:
1.  Select  ADV
 ANCED > Advanced Setup > IPv6.
2. Select the IPv6 connection type from the list. Your Internet service provider (ISP) can 
provide this information.
• If your ISP did not provide details, you can select IPv6 T
 unnel. 
• If you are not...

Advanced Settings 126
N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000 
To monitor Internet traffic:
1. 
Click  ADV
 ANCED > Advanced Setup > Traffic Meter . 
2. To enable the traffic meter, select the  Enable Traffic Meter check box.
3.  If you would like to record and restrict the volume of Internet traf
 fic, select the Traffic 
volume control  by radio button. You can select one of the following options for controlling 
the traffic volume:
• No Limit. No restriction is applied when the...

Advanced Settings 127
 N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000
Device Mode
When the wireless modem router is in Router mode, this screen allows swi\
tching to Modem 
mode, where the wireless modem router acts as a pure bridge or DSL modem\
.
Routing, firewall, wireless support, USB, and the traffic meter are not available in Modem 
mode. 

A typical application is a small-to-medium business scenario where the w\
ireless 
modem router is used for DSL connectivity behind a carrier class...

Advanced Settings 128
N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000 
There are two types of VPN policies:
• Manual. 
 All settings (including the keys) for the VPN tunnel are input manuall\
y at each 
end (both VPN endpoints). No third-party server or organization is inv\
olved.
• Auto. Some parameters for the VPN tunnel are generated automatically
 . This process 
requires using the IKE (Internet Key Exchange) protocol to perform neg\
otiations between 
the two VPN endpoints. 
To manage...

Advanced Settings 129
 N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000
•
Apply . Save any changes to the Enable setting for each policy.
• Cancel. Discard any unsaved changes to the Enable setting for each policy
 .
• Add Auto 
 Policy. Change to the input screen for an Auto policy. When the new policy 
is saved, it appears in the bottom row of the Policy Table. See Add or Edit an Auto 
VPN Policy on page  129.
• Add Manual Policy . Change to the input screen for a Manual policy
 . When the...

Advanced Settings 
130 N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000 
-Remote VPN Endpoint. If the remote endpoint has a dynamic IP address, select 
Dynamic IP Address. No address data input is required.
Otherwise, select the desired option (IP address or domain name) and enter the 
address of the remote VPN endpoint you wish to connect to.
The remote VPN endpoint must have this VPN gateway’s address entered as its 
remote VPN endpoint.
-IKE Keep Alive. Check this check box if you wish to...