Netgear Dgnd3700v2 N600 Wireless Dual Band Gigabit Adsl2 Plus Modem Router User Manual

Advanced Settings 111
 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
5. 
In the corresponding Send to LAN Server field, enter the last digit of t\
he IP address of your 
local computer that will provide this service. 
6.  Click  Apply . 
 The service appears in the list in the screen.
Add a Custom Service
To define a service, game, or application that does not appear in the Ser\
vice Name list, you 
have to first determine which port number or range of numbers is used by\
 the...

Advanced Settings 
112 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2 
Edit or Delete a Port Forwarding Entry
To edit or delete a port forwarding entry:
1. Select Advanced > Advanced Setup > Port Forwarding/Port Triggering.
2. In the table, select the radio button next to the service name.
3. Click Edit Service or Delete Service.
Application Example: Making a Local Web Server Public
If you host a web server on your local network, you can use port forwarding to allow web 
requests from...

Advanced Settings 113
 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
Note:
If you use applications such as multiplayer gaming, peer-to-peer 
connections, real-time communications such as instant messaging, or 
remote assistance (a feature in Windows XP), you should also enable 
Universal Plug and Play (UPnP) according to the instructions in 
Universal Plug and Play  on page
  11 9.
To set up port triggering, you need to know which inbound ports the appli\
cation needs. Also,  you need to...

Advanced Settings 114
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2 
5. 
Click  Add Service to display the following screen: 
6. In the Service Name field, type a descriptive service name. 
7.  In the Service User list, select  Any (the default) to allow this service to be used by any 
computer on the Internet. Otherwise, select  Single address, and enter the IP address of 
one computer to restrict the service to a particular computer

. 
8.  Select the service type, either  TCP or UDP...

Advanced Settings 115
 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
Your wireless modem router contains a client that can connect to the Dyna\
mic DNS service 
provided by DynDNS.org. First visit their website at http://www.dyndns.org  and obtain an 
account and host name that you configure in the wireless modem router. Then, whenever 
your ISP-assigned IP address changes, your wireless modem router automat\
ically contacts 
the Dynamic DNS service provider, logs in to your account, and...

Advanced Settings 
116 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2 
Static Routes
Static routes provide additional routing information to your wireless modem router. Under 
usual circumstances, the wireless modem router has adequate routing information after it has 
been configured for Internet access, and you do not need to configure additional static 
routes. You have to configure static routes only for unusual cases such as multiple wireless 
modem routers or multiple IP subnets...

Advanced Settings 117
 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
To set up a static route:
1. 
Select  Advanced > 
 Advanced Setup > Static Routes, and click  Add to display the 
following screen:
2.  In the Route Name field, type a name  for this static route (for identification purposes only.
3.  Select the Private check box if you want to limit access to the LAN only
 . If Private is 
selected, the static route is not reported in RIP. 
4.  Select the  Active check box to make...

Advanced Settings 118
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2 
Remote Management
The remote management feature lets you upgrade or check the status of yo\
ur N600 Modem 
Router over the Internet.
To set up remote management:
1. 
Select  Advanced > 
 Advanced Setup > Remote Management. 
Note:Be sure to change the wireless modem router’s default login password \
to a very secure password. The ideal password should contain no 
dictionary words from any language and contain uppercase...

Advanced Settings 
119  N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
Normal web browser access uses the standard HTTP service port 80. For greater 
security, enter a custom port number for the remote web management interface. Choose 
a number between 1024 and 65535, but do not use the number of any common service 
port. The default is 8080, which is a common alternate for HTTP.
5. Click Apply to have your changes take effect.
6. When accessing your wireless modem router from the...

Advanced Settings 120
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2 
To turn on Universal Plug and Play:
1. 
Select  Advanced > 
 Advanced Setup > UPnP. The UPnP screen displays. 
2. The available settings and information in this screen are:
Turn UPnP On. UPnP can be enabled or disabled for automatic device configuration. 
The default setting for UPnP is disabled. If this check box is not selec\
ted, the wireless  modem router does not allow any device to automatically control the reso\...