Netgear Dgnd3700v2 N600 Wireless Dual Band Gigabit Adsl2 Plus Modem Router User Manual

Advanced Settings 101
 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
Wireless Repeating Function (WDS)
You can set the N600 Modem Router up to be used as a wireless access poin\
t (AP). Doing 
this enables the wireless modem router to act as a wireless repeater. A wireless repeater 
connects to another wireless wireless modem router as a client where the\
 network to which it 
connects becomes the ISP service.
Wireless repeating is a type of Wireless Distribution System (WDS). A WDS...

Advanced Settings 102
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2 
Wireless Repeater
. The wireless modem router sends all traffic from its local wireless or 
wired computers to a remote access point. To configure this mode, you have to know the 
MAC address of the remote parent access point. 
The DGND3700v2 wireless modem router is always in dual-band concurrent m\
ode, unless  you turn of
 f one radio. Be aware that if you enable the wireless repeater in either\
 radio band, 
the...

Advanced Settings 
103  N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
Disable Wireless Client Association. If your wireless modem router is the repeater, 
selecting this check box means that wireless clients cannot associate with it. Only LAN 
client associations are allowed.
-If you are setting up a point-to-point bridge, select this check box. 
-If you want all client traffic to go through the other access point (repeater with wireless 
client association), leave this check box...

Advanced Settings 104
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2 
2. 
Select  Advanced > Advanced Setup > Wireless Repeating Function  to display the 
Wireless Repeating Function screen.
Scroll to view 
more settings
3.  In the Wireless Repeating Function screen (depending on the frequency y\
ou want to use), 
select the  Enable Wireless Repeating Function  check box and select the Wireless Base 
Station radio button.
4.  Enter the MAC address for one or more repeater units.
5.  Click...

Advanced Settings 
105  N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
4. Click Apply to save your changes.
5. Verify connectivity across the LANs. 
A computer on any wireless or wired LAN segment of the wireless modem router should 
be able to connect to the Internet or share files and printers with any other wireless or 
wired computer or server connected to the other access point.
Port Forwarding and Triggering
By default, the wireless modem router blocks inbound traffic from the...

Advanced Settings 
106 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2 
modem router stores the original information and then modifies the source information in the 
request message, performing Network Address Translation (NAT):
•The source address is replaced with your wireless modem router’s public IP address. 
This is necessary because your computer uses a private IP address that is not 
globally unique and cannot be used on the Internet.
•The source port number is changed to a number...

Advanced Settings 
107  N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
router, you can tell the wireless modem router to open additional incoming ports when a 
particular outgoing port originates a session.
An example is Internet Relay Chat (IRC). Your computer connects to an IRC server at 
destination port 6667. The IRC server not only responds to your originating source port, but 
also sends an “identify” message to your computer on port 113. Using port triggering, you can 
tell the...

Advanced Settings 
108 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2 
Port Forwarding to Permit External Host Communications
In both of the preceding examples, your computer initiates an application session with a 
server computer on the Internet. However, you might need to allow a client computer on the 
Internet to initiate a connection to a server computer on your network. Normally, your wireless 
modem router ignores any inbound traffic that is not a response to your own outbound...

Advanced Settings 
109  N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
How Port Forwarding Differs from Port Triggering
The following points summarize the differences between port forwarding and port triggering:
•Port triggering can be used by any computer on your network, although only one 
computer can use it at a time.
•Port forwarding is configured for a single computer on your network.
•Port triggering requires that you know the computer’s IP address in advance. The IP 
address is...

Advanced Settings 110
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2 
1. 
Select  Advanced > Advanced Setup > Port Forwarding/Port Triggering  to display 
the following screen:
Port Forwarding is selected as the service type.
2.  Click  Add to display the following screen:
3. From the Service list, select the service or game that you will host on \
your network. If the 
service does not appear in the list, see  Add a Custom Service on page 111.
4.  From the 
 Action list, select the...