Netgear Dgn 2200 M Manual

Internet Configuration21
 N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
Manually Configure Your Internet Settings
For you to connect to the network, an active broadband service account i\
s required. Contact 
your ISP for your user name, password, and the network name. You also ne\
ed to configure 
some or all of the settings described in the following sections, dependi\
ng on how you have 
chosen to connect to the Internet:
•     Broadband Settings 
•     Basic ISP Settings on page
 22
•...

Table 2.  Broadband Settings fields  
Fields and check boxesDescription
Internet Connection Mode The choices are:
• Use ADSL first and if fail use Mobile Broadband connection
• Always use Mobile Broadband connection
• Always use ADSL connection
Failover Detection Method
1
1. This field is available only when the internet connection Mode is  Use ADSL first and if fail use Mobile 
Broadband connection.
Select the failover method, and enter the related information:
• DNS lookup using WAN DNS Server
•...

Internet Configuration23
 N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
2. 
Select  Yes or No depending on whether your ISP requires a login. This selection changes \
the fields available on the Basic Settings screen.
ISP does not require login ISP does require login
•     Yes. If your ISP requires a login, select this radio button.
•      No. If your ISP does not require a login, enter the account name, if requi\
red, and the 
domain name, if required.
3.  Enter the settings for the IP...

Internet Configuration24
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition 
When your Internet connection is working, you do not need to launch the \
ISP’s login program 
on your computer to access the Internet. When you start an Internet appl\
ication, your 
wireless modem router automatically logs you in
. 
Table 3.  Basic Settings screen fields  
SettingsDescription
Does Your ISP Require a Login? • Yes
• No
These fields 
display only if no 
login is required. Account Name 
 
(If required)...

Internet Configuration25
 N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
ADSL Settings
NETGEAR recommends that you use the Setup Wizard to automatically detect\
 and configure 
your ADSL settings. This usually works fine. However, if you have techni\
cal experience and 
are sure of the multiplexing method and virtual circuit number for the v\
irtual path identifier 
(VPI) and virtual channel identifier (VCI), you can specify those se\
ttings here.
Note:  
Use the Setup Wizard to select the...

Internet Configuration26
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition 
To manually specify ADSL settings:
1. 
From the main menu, select  ADSL Settings, and the ADSL Settings screen displays.
2. In the Multiplexing Method drop-down list, select  LLC-based or VC-based.
3.  For the VPI, type a number between 0 and 255. The default is 8.
4.  For the VCI, type a number between 32 and 65535. The default is 35.
5.  Click  Apply .
Mobile Broadband Settings
To manually configure your mobile...

Internet Configuration27
 N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
•     Cancel. Discard changes.
•     Refresh
. Update the connection status.
1 
Table 4.  Mobile Broadband Settings fields
1. These fields and check boxes depend on the network.
 
Fields and check boxesDescription
User Name Internet account login user name.
Password Internet account password for authentication.
Country Select your country from the drop-down list.
Internet Service Provider Select your Internet service...

28
2
2.   Wireless Settings
This chapter describes how to use the Wireless Settings screen to view a\
nd change (if needed) your wireless network settings. Security features to prevent objectionab\
le content from reaching 
your computers are covered in Chapter 3, Protecting Your Network and Chapter 6, Advanced 
Configuration . 
This chapter contains the following sections: •     Wireless Adapter Compatibility 
•     Preset Security 
•     Security Basics 
•     Add Clients (Computers or Devices) to Your...

Wireless Settings29
 N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
Preset Security
If label on your router looks like this, then it has preset security.
Restore Factory
Settings: Press for
6 seconds.
Router information
- Default access address
- Default user name and password
- Security PIN
- Serial number
- MAC address
Note:  
If label on your router looks like the one in the following figure, then\
 
your router has no preset wireless security. You need to set the 
wireless security to...

Wireless Settings30
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition 
The wireless modem router comes with preset security. This means that th\
e WiFi network 
name (SSID), passphrase, and security option (encryption protocol) a\
re preset in the factory. 
You can find the preset SSID and passphrase on the bottom of the unit. 
•     WiFi network name (SSID) identifies your network so devices can find it.
•     Passphrase controls access to your network. Devices that know the SSID and the...