Netgear C7100v High Speed Cable Modem Router User Manual

							Control Access to the Internet 31
 AC1900 Cable Modem Voice Router
Set Up Parental Controls
The first time that you select 
Parental Controls from the BASIC Home page, your browser 
goes to the  Parental Controls website, where you can learn more about parental controls. To 
set up parental controls, you must download the genie app.
To set up parental controls:
1.  Launch 
 an  Internet  browser  from  a  computer  or  mobile  device  that  is  connected  to  the 
network.
2.  T
ype  http://www.routerlogin.net .
A login window opens.
3.  Enter 
the  user  name  and  password  for  the  modem  router.
The user name is  admin. 
 The default password is password. The user name and 
password are case-sensitive.
The BASIC Home page displays.
4.  Select  Parental 
 Controls.
The  Parental Controls  website opens.
5.  Click 
the  button  for  the  genie  app  or  version  that  you  want  to  download  and  use.
6. Follow 
the  onscreen  instructions  to  download  and  install  the  genie  app.
7. Open 
the  genie  app  and  select  Parental  Controls.
Live Parental Controls automatically starts.
8.  Click 
the  Next  button,  read  the  note,  and  click  the  Next  button  again.
Because Live Parental Controls uses free OpenDNS accounts, you are prompted to log 
in or create a free account.
9.  Select  a  radio  button  as  follows:
• If you already own an OpenDNS account, leave the  Ye
 s radio button selected. 
• If you did not yet create an OpenDNS account, select the No radio button.
If you are creating an account, the Create a free OpenDNS account page displays.
Do the following:
a.  Complete 
 the  fields. 
						

							Control Access to the Internet 
32 AC1900 Cable Modem Voice Router 
b. Click  the Next button.
ge displays.
10. Select  a  radio  button  for  a  filtering  level  and  click  the Next  button.
The Setup is complete page displays.
11. Click  the Take  me  to  the  status  page  button.
the modem router.
12. To  enable  parental  controls,  click  the Enable  Live  Parental  Controls  button.
Block Access to Your Network
Y
To set up access control:
1. Launch  an  Internet  browser  from  a  computer  or  mobile  device  that  is  connected  to  the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3. Enter  the  user  name  and  password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED  >  Security  > Access  Control.
The Access Control page displays.
5. Select  the Turn  on Access  Control  check  box.
You must select this check box before you can specify an access rule and use the Allow 
and Blocked to connect, 
even if the device is in the blocked list.
6. Select  an  access  rule:
•Allow all new devices to connect
access your network. You don’t need to enter its MAC address in this page. We 

•Block all new devices from connecting. With this setting, if you buy a new device, 
ss for an Ethernet 
owed list.
The access rule does not affect previously blocked or allowed devices. It applies only to 
e settings. 
						

							Control Access to the Internet 33
 AC1900 Cable Modem Voice Router
7. 
To  allow  the  computer  or  device  you’re  currently  using  to  continue to  access  the  network, 
select  the  check  box  next  to  your  computer  or  device,  and  click  the  Allow  button.
8.  Click 
the  Apply  button.
Your settings are saved.
Use Keywords to Block Internet Sites
You can use keywords to block certain Internet sites from your network. You can use blocking  all the time or based on a schedule.
To set block Internet sites:
1.  Launch 
 an  Internet  browser  from  a  computer  or  mobile  device  that  is  connected  to  the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login window opens.
3.  Enter 
the  user  name  and  password.
The user name is  admin. 
 The default password is password. The user name and 
password are case-sensitive.
The BASIC Home page displays.
4.  Select  ADV
 ANCED  >  Security  >  Block  Sites.
5. Select  a  keyword  blocking  option:
• Per Schedule. 
 Turn on keyword blocking according to a schedule that you set. (See 
Schedule When to Block Internet Sites and Services on page  36.)
• Always . 
 Turn on keyword blocking continuously.
6.  In 
the  Type  keyword  or  domain  field,  enter  a  keyword  or  domain  that  you  want  to  block. 
						

							Control Access to the Internet 
34 AC1900 Cable Modem Voice Router 
For example:
•Specify XXX to block http://www.badstuff.com/xxx.html.
•Specify .com if you want to allow only sites with domain suffixes such as .edu or .gov.
•Enter a period (.) to block all Internet browsing access.
7. Click  the Add  Keyword  button.
The keyword is added to the keyword list. The keyword list supports up to 32 entries.
8. Click  the Apply  button.
Your settings are saved.
Delete a Keyword
To delete keywords from the list:
1. Launch  an  Internet  browser  from  a  computer  or  mobile  device  that  is  connected  to  the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3. Enter  the  user  name  and  password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED  >  Security  > Block  Sites.
The Block Sites page displays.
5. Do  one  of  the  following:
•To delete a single word, select it and click the Delete Keyword button.
The keyword is removed from the list.
•To delete all keywords on the list, click the Clear List button.
All keywords are removed from the list.
6. Click  the Apply  button. 
Your settings are saved. 
						

							Control Access to the Internet 35
 AC1900 Cable Modem Voice Router
Block Services From the Internet
You can block Internet services on your network based on the type of service. You can block 
the services all the time or based on a schedule.
To block services:
1.  Launch 
 an  Internet  browser  from  a  computer  or  mobile  device  that  is  connected  to  the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login window opens.
3.  Enter 
the  user  name  and  password.
The user name is  admin. 
 The default password is password. The user name and 
password are case-sensitive.
The BASIC Home page displays.
4.  Select 
ADVANCED  >  Security  >  Block  Services .
5. Specify  when  to  block  the  services:
• T
o block the services all the time, select the  Always radio button.
• T
o block the services based on a schedule, select the Per Schedule radio button.
For information about how to specify the schedule, see  Schedule When to Block 
Internet Sites and Services on page  36. 
						

							Control Access to the Internet 36
AC1900 Cable Modem Voice Router 
6. 
Click  the  Add  button.
7. To  add  a  service  that  is  in  the  Service  Type  menu,  select  the  application  or  service. 
The settings for this service automatically display in the fields.
8.  T
o  add  a  service  or  application  that  is  not  in  the  menu,  select  User  Defined,  and  do  the 
following:
a. If you know that the application uses either 
 TCP or UDP, select the appropriate 
protocol. Otherwise, select TCP/UDP (both).
b.  Enter 
the  starting  port  and  ending  port  numbers. 
•If the service uses a single port number
 , enter that number in both fields.
• T
o find out which port numbers the service or application uses, you can contact 
the publisher of the application, ask user groups or newsgroups, or search on the 
Internet.
9.  Specify 
 which  devices  on  your  LAN  are  affected  by  the  rule,  based  on  their  IP  addresses:
• Only This IP 
 Address. Block services for a single computer.
• IP 
Address Range . Block services for a range of computers with consecutive IP 
addresses on your network.
• All lP 
Addresses. Block services for all computers on your network.
10.  Click 
the  Add  button.
Your settings are saved.
Schedule When to Block Internet Sites and Services
When you schedule blocking, the same schedule is used to block sites and to block services. 
For information about how to specify what you want the modem router to block, see  Use 
Keywords to Block Internet Sites on page  33 and Block Services From the Internet  on 
page   35. 
						

							Control Access to the Internet 
37  AC1900 Cable Modem Voice Router
To schedule blocking:
1. Launch  an  Internet  browser  from  a  computer  or  mobile  device  that  is  connected  to  the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3. Enter  the  user  name  and  password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED  >  Security  >  Schedule.
The Schedule page displays.
5. Specify  when  to  block  keywords  and  services:
•Days to Block
keywords or select the Every Day check box, which automatically selects the check 
boxes for all days. 
•Time of Day to BlockAll 
Day for 24-hour blocking. 
6. Select  your  time  zone. 
7. If you live in an area that observes daylight saving time, select the Automatically adjust for 
daylight  savings  time  check  box. 
8. Click  the Apply  button. 
Your settings are saved.
Avoid Blocking on a Trusted Computer
You can exempt one trusted computer from blocking. The computer you exempt must use a 
fixed IP address. You can use the reserved IP address feature to specify the IP address. See 
Manage LAN IP Addresses on page 75.
To specify a trusted computer:
1. Launch  an  Internet  browser  from  a  computer  or  mobile  device  that  is  connected  to  the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3. Enter  the  user  name  and  password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home page displays. 
						

							Control Access to the Internet 38
AC1900 Cable Modem Voice Router 
4. 
Select  ADVANCED  >  Security  >  Block  Sites .
The Block Sites page displays.
5.  Scroll 
down  and  select  the  Allow  trusted  IP  address  to  visit  blocked  sites   check  box.
6.  In 
the  Trusted  IP Address   field,  enter  the  IP  address  of  the  trusted  computer.
7.  Click 
the  Apply  button.
Your settings are saved.
Set Up Security Event Email Notifications
The modem router can email you its logs of modem router activity. The log records activity  and security events such as attempts to access blocked sites or services. 
To set up email notifications:
1.  Launch 
 an  Internet  browser  from  a  computer  or  mobile  device  that  is  connected  to  the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login window opens.
3.  Enter 
the  user  name  and  password.
The user name is  admin. 
 The default password is password . The user name and 
password are case-sensitive.
The BASIC Home page displays.
4.  Select  ADV
 ANCED  >  Security  >  E-mail.
5. Select  the  Turn  Email  Notification  On   check  box.
6.  In 
the  Your  Outgoing  Mail  Server   field,  enter  the  name  of  your  ISP  outgoing  (SMTP)  mail 
server  (such  as  mail.myISP.com).  
						

							Control Access to the Internet 
39  AC1900 Cable Modem Voice Router
You might be able to find this information in the configuration page of your email program. 
ent.
7. Enter  the  email  address  to  which  logs  and  alerts  are  sent  in  the Send  to  This  E-mail 
Address  field. 
ield is blank, log and alert 
messages are not sent.
8. If  your  outgoing  email  server  requires  authentication,  select  the My  Mail  Server  requires 
authentication  check  box,  and  do  the  following:
a.In the User Name.
b. In  the Password  field,  type  the  password  for  the  outgoing  email  server.
9. To  send  alerts  when  someone  attempts  to  visit  a  blocked  site,  select  the Send Alerts 
Immediately  check  box.
10. To  send  logs  based  on  a  schedule,  specify  these  settings:
•From the Send logs according to this schedule menu, select the schedule type.
•From the Day menu, select the day.
•From the Time menu, select the time, and select the am or pm radio button.
11. Click  the Apply  button.
Your settings are saved.
Logs are sent automatically. If the log fills before the specified time, it is sent. After the log 
is sent, it is cleared from the modem router memory. If the modem router cannot email the 
log and the log buffer fills, the modem router overwrites the log.
Manage Services
Yetwork based on their IP 
addresses. For example, you can prevent the use of certain Internet services such as surfing 
the web (HTTP) by everyone or just a few people on your network. You can configure service 
blocking to be on never, according to a schedule, or always.
To manage services:
1. Launch  an  Internet  browser  from  a  computer  or  mobile  device  that  is  connected  to  the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3. Enter  the  user  name  and  password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home page displays. 
						

							Control Access to the Internet 40
AC1900 Cable Modem Voice Router 
4. 
Select  ADVANCED  >  Security  >  Services.
5. Select  or  clear  check  boxes  to  enable  or  disable  services.
• When firewall features are enabled, the modem router performs stateful packet 
inspection (SPI) and protects against denial of service (DoS) attacks.
• When IPSec pass-through is enabled, IPSec traf
 fic is forwarded. When it is disabled, 
this traffic is blocked.
• When PPTP pass-through is enabled, PPTP traf
 fic is forwarded. When it is disabled, 
this traffic is blocked.
• When 
Multicast is enabled, the modem router can pass multicasting streams through 
the firewall.
• When port scan detection is enabled, the modem router can respond to 
Internet-based port scans.
• When IP flood detection is enabled, the modem router can block malicious devices 
that are attempting to flood devices.
• Y
ou can use the Web Features check boxes to set certain web-oriented cookies, Java 
scripts, and pop-up windows to be blocked by the firewall.
• Y
ou can use the NAT ALG Status check boxes to allow NAT traversal filters for certain 
application layer control and data protocols.
6.  Click 
the  Apply  button.
Your settings are saved.