Netgear Ac1450 802 11ac Dual Band Gigabit Smart Wifi Router User Manual

Advanced Settings101
 AC1450 Smart WiFi Router
By default, this check box is selected. UPnP for automatic device config\
uration can be 
enabled or disabled. If the Turn UPnP On check box is cleared, the router does not allow 
any device to automatically control the resources, such as port forwardi\
ng (mapping), of 
the router.
3. T
ype the advertisement period in minutes.
The advertisement period specifies how often the router broadcasts its U\
PnP information. 
This value can range from 1 to 1440...

Advanced Settings102
AC1450 Smart WiFi Router 
•
If you are not sure, select  Auto Detect so that the router detects the IPv6 type that is 
in use.
• If your Internet connection does not use PPPoE, DHCP
 , or fixed, but is IPv6, select 
Auto Config.
For more detailed information about Internet connection types, see the f\
ollowing sections.
3. Click the  Apply button.
Your changes take effect.
Requirements for Entering IPv6 Addresses
IPv6 addresses are denoted by eight groups of hexadecimal quartets that...

Advanced Settings103
 AC1450 Smart WiFi Router
•
Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired 
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length 
of the prefix, which is also indicated by the underline (_) under the \
IPv6 address. If no 
address is acquired, the field displays Not Available.
• Router
’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired 
for the router’s LAN interface. The number after the...

Advanced Settings
104 AC1450 Smart WiFi Router 
•Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired 
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length 
of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no 
address is acquired, the field displays Not Available.
•Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired 
for the router’s LAN interface. The number after the...

Advanced Settings105
 AC1450 Smart WiFi Router
The screen adjusts:
The router automatically detects the information in the following fields\
:
• Router
’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired 
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length 
of the prefix, which is also indicated by the underline (_) under the \
IPv6 address. If no 
address is acquired, the field displays Not Available.
• Router
’s IPv6 Address on LAN. This...

Advanced Settings106
AC1450 Smart WiFi Router 
To set up a pass-through IPv6 Internet connection:
1.
Select  Advanced > Advanced Setup > IPv6.
The IPv6 screen displays.
2. In the Internet Connection 
 Type list, select Pass Through.
The screen adjusts, but no additional fields display.
3. Click the  Apply button.
IPv6 Fixed
To set up a pass-through IPv6 Internet connection:
1.Select  Advanced > 
 Advanced Setup > IPv6.
The IPv6 screen displays.
2. In the Internet Connection 
 Type list, select Fixed....

Advanced Settings107
 AC1450 Smart WiFi Router
Note:
 
If you do not specify the DNS servers, the router uses the DNS servers 
that are configured for the IPv4 Internet connection on the Internet Set\
up 
screen. (See  Internet Setup on page  20.)
4. Specify how the router assigns IPv6 addresses to the devices on your hom\
e network (the 
LAN) by selecting one of the following radio buttons:
• Use DHCP Server . 
 This method passes more information to LAN devices, but some 
IPv6 systems might not support...

Advanced Settings
108 AC1450 Smart WiFi Router 
•Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired 
for the router’s LAN interface. The number after the slash (/) is the length of the prefix, 
which is also indicated by the underline (_) under the IPv6 address. If no address is 
acquired, the field displays Not Available.
3.(Optional) In the DHCP User Class (If Required) field, enter a host name.
Most people do not need to fill in this field, but if your ISP has given you a...

Advanced Settings109
 AC1450 Smart WiFi Router
The screen adjusts: 
The router automatically detects the information in the following fields\
:
• Router
’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired 
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length 
of the prefix, which is also indicated by the underline (_) under the \
IPv6 address. If no 
address is acquired, the field displays Not Available.
• Router
’s IPv6 Address on LAN. This...

Advanced Settings11 0
AC1450 Smart WiFi Router 
•
Use DHCP Server . This method passes more information to LAN devices, but some 
IPv6 systems might not support the DHCv6 client function.
• Auto Config. 
 This is the default setting.
7. (Optional) Select the  Use This Interface ID check box, and specify the interface ID that you 
want to be used for the IPv6 address of the router
 ’s LAN interface.
If you do not specify an ID here, the router generates one automatically\
 from its MAC 
address.
8. Click...