NEC Xen Alpha Installation Manual

Installation Manual  •  •  •  Installing Optional Terminal EquipmentPage 99A6-506000-642-01
002–9Station Message Detail 
RecordingEnables or disables Station 
Message Detail Recording (SMDR).  
SMDR provides detailed telephone 
usage records.9 = Enabled
– = Disabled
002–0
0. Station Camp-on 
SelectionAssigns whether or not Station 
Camp-on is allowed to a busy 
station.0: Yes
–: No
003
Hold Warning Timer 
P003 HOLD RECALL
0
Sets the timer that is used to 
indicate a call has been on hold 
past the time...

Page 100Installing Optional Terminal Equipment  •  •  •  Installation ManualA6-506000-642-01
009Outgoing Call Line 
Selection
P009 OUTPUT LN
2
Used to assign the type of line the 
system connects to when 0– 
(outside call access code) is used, 
 
S  is pressed, or a 
one-touch key is pressed.
If ‘0’ programming value, is 
specified, the line key must be 
pressed to access a trunk line.  If 
analog only or analog prioritized is 
selected, an analog trunk line is 
selected first.  If ISDN prioritized is...

Installation Manual  •  •  •  Installing Optional Terminal EquipmentPage 101A6-506000-642-01
018–1Night Mode – Monday
P018 NIGHT MODE
MONDAY:0
Used to assign night mode for 
Monday.0 = Continuous Day Mode
1 = Night Mode Assignment 1
2 = Night Mode Assignment 2
3 = Continuous Night Mode 
(Holidays)
Press Transfer to advance to 
next day setting.
Exiting program mode will enter 
new data. 018–2
Night Mode – Tuesday
P018 NIGHT MODE
TUESDAY:0
Used to assign night mode for 
Tuesday.
018–3Night Mode –...

Page 102Installing Optional Terminal Equipment  •  •  •  Installation ManualA6-506000-642-01
020Restricted Dialing – Table 1
P020 RSTRC DL1
01:❏❏❏❏❏❏❏❏
❏❏❏❏❏❏❏❏❏❏❏❏❏❏❏❏ ❏❏❏❏❏❏❏❏
Used to record numbers that users 
are not allowed to dial (e.g., long 
distance numbers). The table 
allows eight numbers to be entered 
and the maximum length of each 
number is eight digits.Enter the numbers (maximum 8 
digits) that are restricted dialing.
021Restricted Dialing – Table 2
P021 RSTRC DL2
01:❏❏❏❏❏❏❏❏...

Installation Manual  •  •  •  Installing Optional Terminal EquipmentPage 103A6-506000-642-01
060–1ISDN Setup – MSN or 
Indial Number Range
P060 ISDN SETUP
21
Specifies whether the numbering of 
the BRI ISDN services connected to 
the system are part of a 100 
number indial range or a smaller 
number range.1: MSN Mode – 1, 2 or 8 
numbers.
–: Indial Mode – 100 
sequential numbers.
For indial mode, the last 2 digits of 
a number or range are used for 
matching.
060
MSN mode must have the 
ISDN interface...

Page 104Installing Optional Terminal Equipment  •  •  •  Installation ManualA6-506000-642-01
Trunk Programming
Programming Note
To change the default setting for a trunk port, dial the 1 digit number that corresponds to the trunk you want to change 
(1 to 6, as appropriate). For example, to change the setting for trunk Port 1, dial “1”. Depending on the funciton 
number, dialling the port number will either toggle its setting between two values or, where mroe thant wo values are 
available, will cause...

Installation Manual  •  •  •  Installing Optional Terminal EquipmentPage 105A6-506000-642-01
111NOT USED
11 2Line Reversal Assignment
P112 LINE REVERS
– – – – – –
Specifies whether a trunk is 
assigned with Line Reversal 
Signalling at the exchange.1 = YES
–: = NO
11 9
Ring Tone Type
P119 RING CYCLE
654321
Used to select either a low or high 
ringing tone.1= Low 
– = High
124
External Speaker Tone 
Duration for Day Mode
P124 EXTSP DY
555555
Used to assign the length of the 
tone sent to the external...

Page 106Installing Optional Terminal Equipment  •  •  •  Installation ManualA6-506000-642-01
149Direct Calling for Night 
mode on Trunk Line 4
P149 DIT LN4 NT
150Direct Calling for Night 
mode on Trunk Line 5
P150 DIT LN5 NT
151Direct Calling for Night 
mode on Trunk Line 6
P151 DIT LN6 NT
152Direct Calling Answer 
Delay Time
P152 DIT DLY
000000
Used to specify the duration of the 
delay of incoming direct calls. This 
applies to calls received on a line 
assigned for direct calling.0 = 0 sec. 4 = 30...

Installation Manual  •  •  •  Installing Optional Terminal EquipmentPage 107A6-506000-642-01
202Off-Hook Ringing Tone
P202 OFFHK RING
11111111111111
Used to indicate whether a ringing 
tone is sent when the user is 
engaged in a conversation.  This 
tone signals the user that there is 
an incoming call (on a trunk line).  1 = Enabled
2 = Disabled
203
Trunk Line Barge-In
P203 CO BRG IN
– – – – – – – – – – –
Used to indicate (for each 
telephone) if barge-in is allowed 
when the user is engaged in a call...

Page 108Installing Optional Terminal Equipment  •  •  •  Installation ManualA6-506000-642-01
216Handsfree Assignment
P216 HFU
11111111111111
Used to assign (for each multiline 
telephone) handsfree operation. 1 = Enabled
– = Disabled
217
Internal All Call Paging 
To n e
P217 PAGE EXT
11111111111111
Used to enable or disable call 
paging tone for each multiline 
telephone.  The page will still be 
displayed on each multiline 
telephone and can be answered by 
any multiline telephone in the 
system.1 =...