NEC Wt610e Projector User Manual

84
 Menu Elements
Slider
Solid triangle
Highlight
Ta b
Radio button
Check box
Cancel button
OK button
Menu windows or dialog boxes typically have the following elements:
Highlight ................ Indicates the selected menu or item.
Solid triangle ......... Indicates further choices are available. A highlighted triangle indicates the item is active.
Tab........................ Indicates a group of features in a dialog box. Selecting on any tab brings its page to the front.
Radio button ......... Use...

85
 Menu Descriptions & Functions [Source]
Computer
Selects the computer connected to your Computer input connector signal.
NOTE: An optional component cable (Component V or ADP-CV1 cable) is needed for a component signal.
DVI (DIGITAL/ANALOG)
Selects the computer connected to the DVI input connector.
Video
Selects what is connected to your Video input-VCR, laser disc player, DVD player or document camera.
S-Video
Selects what is connected to your S-Video input-VCR, DVD player, or laser disc player....

86
Entry List
Use the SELECT 
 or  button on your remote control or the projector cabinet to select the signal and press the
ENTER button on the remote control or the projector cabinet to display the Entry Edit Command screen.
Entering the Currently Projected Signal into the Entry List
1. Display the Entry List.
2. Use the SELECT 

 or  button on your remote control or the projector cabinet to select any number and
press the ENTER button on the remote control or the projector cabinet to display the...

87
Entry Edit Command
You can edit signals on the Entry List.
Load ...................... Enables you to select a signal from the list.
Store ..................... Enables you to store the currently projected signal.
Cut ........................ Enables you to remove a selected signal from the list and place it on the clipboard in the projector.
Copy ...................... Enables you to copy a selected signal from the list and place it on the clipboard in the projector.
Paste ........................

88
 Menu Descriptions & Functions [Adjust]
Basic
[Brightness]
Adjusts the brightness level or the back raster intensity.
[Contrast]
Adjusts the intensity of the image according to the incoming signal.
[Color]
Increases or decreases the color saturation level (not valid for RGB and DVI digital).
6. Using On-Screen Menu 

89
[Hue]
Varies the color level from +/- green to +/-blue. The red level is used as reference. This adjustment is only valid for
Video, Component and TV standard inputs (not valid for RGB and DVI digital).
[Sharpness]
Controls the detail of the image for Video (not valid for RGB and DVI digital).
Using the Wall Color Correction [Wall Color]
This function allows for quick adaptive color correction in applications where the screen material is not white.
The following nine options are available.
• OFF •...

90
Selecting Aspect Ratio [Aspect Ratio] (not available for Viewer)
Screen Type  4:3 Screen Type  16:9
Aspect Ratio allows you to select the best Aspect mode to display your source image.
When screen type 4:3 is selected for the source, the following selections will display:
4:3 ......................... Standard 4:3 aspect
Letter Box .............. Reduced to display the true aspect with black borders on top and bottom
Wide Screen .......... Left & Right stretched with black borders on top and bottom...

91
Controlling Volume  [Volume]
You can adjust the volume level of the projector speakers and AUDIO OUT (Stereo Mini Jack).
Reset
To reset the settings for “Basic”, select “Reset” and press the ENTER button.
The message The setting values on page will be reset. Are you sure?” will be displayed.
Select “Yes” and press the ENTER button. To return without storing settings, select “No” and press the ENTER button.
Picture Management
[Preset]
This option allows you to adjust neutral tint for yellow, cyan or...

92
[Detail Settings]
This will provide you with three pages of menus that provide more detailed settings.
[Page1]
Selecting Reference Setting [Reference]
This feature allows you to use color correction or gamma values as reference data to optimize for various types of
images. You can select one of the following five settings.
Presentation ...... Recommended for making a presentation using a PowerPoint file.
Video ................. Recommended for regular picture such as TV program.
Movie ...................

93
Adjusting Color Temperature [Color Temperature]
This feature adjusts the color temperature using the slider.
NOTE:
*When Presentation is selected in [Reference], this function is not available.
*When [White Balance] settings has been changed, the color temperature value on screen does not reflect the real color
temperature.
Adjusting Brightness of White Area [White Peaking]
Adjust the brightness of the white areas by using the slide bar. As the picture becomes dim, it looks more natural.
[Page 2]...