NEC Wt600 Projector User Manual

6-14
Menu
Allows you to set preferences for the on-screen menu. Press
OK to save your changes for all the features of Page 1 and
Page 2.
[Page1]
Selecting Menu Language [Language]:
You can choose one of seven languages for on-screen in-
structions. The options are: English, German, French, Italian,
Spanish, Swedish and Japanese.
Selecting Menu Mode [Menu Mode]:
This feature allows you to select 3 menu modes: Advanced
Menu, Custom Menu and Basic Menu.
Advanced Menu ...... This is the menu that contains...

6-15
[Page 1]
Setting Lamp Mode to Normal or Eco [Lamp Mode]:
This feature enables you to select two brightness mode of the
lamp: Normal and Eco modes. The lamp life can be extended
up to 3000 hours by using the Eco mode.
Normal  Mode ........... This is the default setting (100% Bright-
ness).
Eco Mode ................ Select this mode to increase the lamp
life (80% Brightness).
Selecting Projector Orientation [Orientation]:
This reorients your image for your type of projection. The op-
tions are:...

6-16
Setting Mouse Button and Sensitivity [Mouse]:
This option lets you change your USB mouse settings. The
mouse settings feature is available for USB mouse only.
Choose the settings you want:
Mouse Button .......... Right Hand or Left Hand
Mouse Sensitivity .... Fast, Medium or Slow
[Page 3]
Selecting Signal Format [Signal Select]
RGB and DVI (ANALOG):
Allows you to choose RGB or DVI (ANALOG) for an RGB
source such as a computer, or Component for a component
video source such as a DVD player. Normally...

6-17
Enabling Horizontal and Vertical Keystone Correction Save
[3D Reform Save]:
This option enables you to save your current 3D Reform set-
tings. Saving your change once affects all sources. The
changes are saved when you turn off the projector.
Enabling High Speed Fan Mode [High Speed Fan Mode]:
This option allows you to select two modes for fan speed:high-
speed mode and normal speed mode.
When you wish to cool down the temperature inside the pro-
jector quickly, check this box.
NOTE: Enable High...

6-18
Selecting Aspect Ratio and Position for Screen [Screen]
Screen Type:
Select either 4:3 Screen or 16:9 Screen for the screen to be
used.
See also Aspect Ratio on page 6-8.
NOTE: When Resolution is set to Native, this selection is inactive.
Position:
This feature adjusts the vertical position of the image when
viewing video with an aspect ratio selected.
When some aspect ratios are selected in Image Options, the
image is displayed with black borders on the top and bottom.
You can adjust the vertical...

6-19
DNS Configuration
................................ Type in the IP address of DNS server
on the network connected to the pro-
jector. 12 numeric characters are used.
Domain Name ......... Type in domain name of the network
connected to the projector. Up to 60 al-
phanumeric characters can be used.
Network Type (required for wireless only)
Mode:
Select communication method when using wireless LAN.
Infrastructure ........... Select this option when communicating
with one or more equipment connected
to...

6-20
Key1-4:
Enter encryption key when selecting [64bit] or [128bit] in [WEP].
Up to 5 characters can be set in 64 bit and up to 13 charac-
ters in 128 bit. Press the “HEX” button in the Software key-
board to change to “ASCII” to set the key in ASCII digit. You
can toggle this button between “ASCII” and “HEX”.
When setting the key in hexadecimal digit:
*The “0x (numberal and alphabet respectively) appears
automatically right in front of your key code.
*Hexadecimal uses 0 to 9 and A to F.
*Up to 10...

6-21
Status
Displays the status of the LAN settings.
IP Address ............... Indicates the IP address of the projec-
tor.
Subnet Mask ........... Indicates the subnet mask of the pro-
jector.
Gateway ..................Indicates the gateway of the network
connected to the projector.
MAC Address .......... Indicates the MAC address of the LAN
card.
Reconnect ............... Use this button to connect the projector
to a network.
DHCP
Depending on your network environment, acquiring an IP ad-
dress from a...

6-22
Setting a Password
A password can be set for your projector to avoid operation by
an unauthorized person.
There are two password options: one for menu and the other for
logo.
When a password is set, doing any one of the following four
operations will display the Password input screen.
For Menu:
* Changing the menu to Advanced
* Editing the custom menu
For Logo:
* Changing the background
* Changing the logo data in PC Card Files
Procedures for Password setting apply to both Menu and Logo.
Entry
To...

6-23
Security
The Security function enables you to protect your projector so
that the projector will not project a signal unless you enter a
keyword. There is also an option to lock the projector by using a
registered PC card as a protect key. Once you have registered
your PC card as a protect key, you are required to insert the
registered PC card into the PC card slot of the projector each
time you turn on the projector. You can enable the Security func-
tion by using a keyword only.
Enable/Disable...