NEC Wt600 Projector User Manual

WT600
Projector
User’s Manual 

WT600 User’s Manual Supplement
This document provides updated information that supplements the WT600 User’s Manual. Read this supplement as well as the
Users Manual.
1Correction to “What’s in the Box?”
Although a Quick Connect Guide is shown on page iii of the user’s manual, the WT600 SETUP GUIDE  is actually included with
the projector.
First read the WT600 SETUP GUIDE before operating the projector.
2Change in [3D Reform] Operation
The procedures in the users manual are different from the actual...

[Bottom]
Correct the bottom side on a projected image to level as shown the drawing.
Screen (solid line)
Projected area (dotted line)
NOTE:
•In the [Pincushion] screen, when the [Top] adjustment value is 0, adjustment of [Bottom] will not be possible* .
Also note that when the adjustment value of the [Top] is a small value (on the order of +5), there will be almost no change of
the image even when the [Bottom] is adjusted*.
•In [Pincushion] screen, when the [Bottom] adjustment value is less than “0”, a...

LIMITED WARRANTYExcept as specified below, the warranty that may be provided by the
dealer covers all defects in material or workmanship in this product.
The following are not covered by the warranty:
1. Any product on which the serial number has been defaced, modified
or removed.
2. Damage, deterioration or malfunction resulting from;
a. Accident, misuse, abuse, neglect, fire, water, dust, smoke, lightning or
other acts of nature, unauthorized product modification, or failure to fol-
low instructions...

WT600
Projector
User’s Manual
English
Deutsch
Français
Italiano
Español
Svenska
WARNING TO CALIFORNIA RESIDENTS:
Handling the cables supplied with this product, will expose you to lead, a chemi-
cal known to the State of California to cause birth defects or other reproductive
harm. Wash hands after handling. 

ii
Safety Cautions
Precautions
Please read this manual carefully before using your NEC WT600
Projector and keep the manual handy for future reference. Your
serial number is located on the right side of your projector. Record
it here:
CAUTION
To turn off main power, be sure to remove the plug
from power outlet.
The power outlet socket should be installed as near to
the equipment as possible, and should be easily ac-
cessible.
CAUTION
TO PREVENT SHOCK, DO NOT OPEN THE CABI-
NET.
NO USER-SERVICEABLE PARTS...

iii
Whats in the Box?
Make sure your box contains everything listed. If any pieces are
missing, contact your dealer.
Please save the original box and packing materials if you ever
need to ship your WT600 Projector.
Remote control
(7N900362)
Power cable
(North America: 7N080204)
(Europe: 7N080003) Projector
Remote Control Cable
(07N520019)
CD-ROM (7N950108)
Projector User Suppor tware
USB cable
(7N520013)
Setup
Guide
NEC
Software Utility
Installation Guide
Users
Manual
Batteries
For North America only...

iv
Table of Contents
Important Information ..................................................... iiSafety Cautions .................................................................................................. ii
Whats in the Box? ............................................................................................ iii
1. Introduction ........................................................... 1-11-1. Introduction to the Projector...

1-1
1-1. Introduction to the Projector
This section introduces you to the WT600 Projector and describes
key features and controls.
Congratulations on Your Purchase of The WT600
Projector
The WT600 is a sophisticated four aspherical mirror XGA projec-
tor. With the WT600 you will be able to project images up to 100
(measured diagonally) from your DVD player, VCR, satellite
hookup, HDTV source, PC, Workstation or Macintosh computer
(desktop or notebook) and images from your digital camera PC
Card or...

1-2
Carrying handle
PC CARD
AUDIO IN
R
L
/MONOVIDEO INS-VIDEO IN
DVI-I IN
RGB IN
RGB OUT DVI-I
RGB AUDIO IN
USB
AUDIO OUT PC
CONTROL
REMOTE
IN
POWER ENTEERMENUSOURCE FOCUSPC CARD
CANCEL
STATUS
LAMP     ON/
STAND BYAUTO
ADJUST3D
REFORM
SELECT
Remote sensor
Ventilation (inlet)
Controls
Mirror face
Ventilation (outlet)
Ventilation (outlet)
Mirror cover
Speaker Speaker
Remote sensor
Terminal panel
Main Power Switch
AC Input
Mirror cover lock switch
1-2. Part Names of the Projector
1. Introduction
Front...