NEC Visualink 128/384 Quick Installation Guide

NDA-24232 Issue 2.0Page 3-1
VisuaLink 128/384 Quick Installation Guide Chapter 3
Chapter 3  Startup Screen for the VisuaLink 128 and VisuaLink 384
When you first turn on your VisuaLink, there will be an initial configuration 
screen.  These configuration screens will have to be completed before your system 
becomes operational.
3.1 Start up 
configuration 
screensThe following are the startup screens that will be active on first power up or acti-
vated on demand by the user after choosing the...

Page 3-2NDA-24232 Issue 2.0 
Chapter 3 VisuaLink 128/384 Quick Installation Guide
Remote Controller Directions: 
Gives some general directions for configure the VisuaLink system.  Using the 
Remote controller highlight the NEXT option to advance to the configure screen 
or press the lower portion of the CAMERA CONTROL key to highlight the 
Configure Later to advance to the normal ICON screens.  If you choose to 
configure later, the system will have to be programmed with My numbers and 
SPID’s in order...

NDA-24232 Issue 2.0Page 3-3
VisuaLink 128/384 Quick Installation Guide Chapter 3
Video Number 1 Screen’s
Using the number pad of the wireless remote enter My Number with area code 
and SPID numbers associated to Line  (BRI 1).  Each BRI will have My numbers 
labeled #1 and #2 and two SPID’s.  All four numbers must be entered.  Choose 
NEXT when complete.  
Note:
“PROCEED TO STEP 2” will only be shown on the VisuaLink 128 system.  
VisuaLink 384 will show “Proceed to Line 2 Setup”   
Step 1--Enter My...

Page 3-4NDA-24232 Issue 2.0 
Chapter 3 VisuaLink 128/384 Quick Installation Guide
Video Number 2 Screens:
Using the number pad of the wireless remote enter My Number with area code 
and SPID numbers associated to Line  (BRI 2).  Each BRI will have My numbers 
labeled #1 and #2 and two SPID’s.  All four numbers must be entered.  Choose 
NEXT when complete.
Note:
  This screen will only appear on the VL 384 system.
Step 1--Enter My Number and SPID for BRI LINE 2
    My Number 1:
 []
    SPID 1:
    [ ]...

NDA-24232 Issue 2.0Page 3-5
VisuaLink 128/384 Quick Installation Guide Chapter 3
Video Number 3 Screens:
Using the number pad of the wireless remote enter My Number with area code 
and SPID numbers associated to Line  (BRI 3).  Each BRI will have My numbers 
labeled #1 and #2 and two SPID’s.  All four numbers must be entered.  Choose 
NEXT when complete.
Note: 
 This screen will only appear on the VL 384 system.
3.3 Optional User 
Settings:The following is a description for Optional Setting screen.
Step...

Page 3-6NDA-24232 Issue 2.0 
Chapter 3 VisuaLink 128/384 Quick Installation Guide
Optional information:
You may enter this optional information.  The name you enter makes it easy for 
users to identify this particular VisuaLink.  The name can be up to 20 characters 
long.  The Password is the password needed to be entered when selecting the 
Utilities ICON.  After entering the optional information select the NEXT to 
advance to the next screen.  
Application Screen’s
Using the number pad on the wireless...

NDA-24232 Issue 2.0Page 3-7
VisuaLink 128/384 Quick Installation Guide Chapter 3
Congratulations Screen
The VisuaLink is now setup for the configuration you have entered.  Press the 
ENTER button on the REMOTE CONTROLLER, the VisuaLink will display a 
blue screen and recycle.  The VisuaLink should will power up to a normal state.   
You may begin to use the video conferencing system immediately.
Note:
If there are no My Numbers entered in the configuration the VisuaLink 
will display the Start Up...

Page 3-8NDA-24232 Issue 2.0 
Chapter 3 VisuaLink 128/384 Quick Installation Guide
VisuaLink system start up screen.
Changing the configuration
It is important that the CODEC is set up with a local number and SPID numbers.  
If the unit is not setup with a local number (my number) and SPID, the unit will 
not allow for dialing and receiving of video calls.  If you have entered these 
numbers in the Start Up configuration, you may ignore this section.  If the 
VisuaLink environment has changed, such as the...

NDA-24232 Revision 1.0Page 4-1
VisuaLink 128/384 Quick Installation Guide Chapter 4
Chapter 4  Rollabout 128/384 Procedures
4.1 Rollabout System 
ConnectionsUse the following procedures to set up the VisuaLink 128 or VisuaLink 384.  See 
Appendix A for system drawings for the VisuaLink 128.  See Appendix B for the 
system drawings for the VisuaLink 384.
Note:
This guide provides connection diagrams for manufacturer-specific 
components.  If your system contains components from other manufacturers,...

Page 4-2NDA-24232 Revision 1.0
Chapter 4 VisuaLink 128/384 Quick Installation Guide
4.2  Step-by-Step 
ProcedureThe following are the steps and procedures for the installation of the VisuaLink 
128/384.
STEP ACTION DRAWING
1. Locate and unpack the Cabinet box.
2. Locate Power Strip at bottom-left (looking 
through the front) of cabinet and feed power cable 
through the power opening at rear of cabinet.
3. Plug power strip power cable into AC outlet.  
Make sure the ON/OFF switch on the upper right...