NEC Television X462HB User Manual

							
User’s Manual
MultiSync X462HB 
						

							
Index
Declaration of conformity ........................................................................\
..................................................... English-1
Important Information ........................................................................\
.................................. ......................... English-2
WARNING, CAUTION ........................................................................\
....................................... ......... English-2
Declaration ........................................................................\
............................................ ............................... English-2
Safety Precautions, Maintenance & Recommended Use ........................................................................\
.... En glish-3
Contents ........................................................................\
............................................... ................................ English-4
Installation ........................................................................\
........................................... ................................. English-5
Parts Name and Functions ........................................................................\
............................... ................... English-7
Control Panel ........................................................................\
.......................................... .................... English-7
Terminal Panel ........................................................................\
......................................... ................... English-8
Wireless Remote Control ........................................................................\
................................ ........... English-10
Operating Range for the Remote Control ........................................................................\
................. .. English-11
Handling the remote control ........................................................................\
............................ ....... English-11
Setup ........................................................................\
.................................................. .................................. English-12
Connections ........................................................................\
............................................ ............................. English-14
Wiring Diagram ........................................................................\
......................................... .................. English-14
Connecting a Personal Computer ........................................................................\
......................... ..... English-15
Connecting a DVD Player with HDMI out ........................................................................\
.................. . English-15
Connecting a Computer with DisplayPort ........................................................................\
................. .. English-15
Basic Operation ........................................................................\
........................................ ........................... English-16
Power ON and OFF Modes ........................................................................\
................................. ....... English-16
Power Indicator ........................................................................\
........................................ .................. English-17
Using Power Management ........................................................................\
................................. ........ English-17
Selecting a video source ........................................................................\
............................... ............. English-17
Picture Aspect ........................................................................\
......................................... ................... English-17
Information OSD ........................................................................\
........................................ ................. English-18
Picture Mode ........................................................................\
........................................... ................... English-18
OSD (On-Screen-Display) Controls ........................................................................\
....................... .............. English-19
PICTURE ........................................................................\
................................................ .................... English-20
ADJUST ........................................................................\
................................................. .................... English-20
AUDIO ........................................................................\
.................................................. ...................... English-21
SCHEDULE ........................................................................\
............................................... ................. English-21
PIP ........................................................................\
.................................................... .......................... English-22
OSD ........................................................................\
.................................................... ........................ English-22
MULTI DISPLAY ........................................................................\
.......................................... ............... English-23
DISPLAY PROTECTION ........................................................................\
..................................... ....... English-24
ADVANCED OPTION ........................................................................\
........................................ ......... English-25
Remote Control Function ........................................................................\
................................ ..................... English-28
Controlling the LCD monitor via RS-232C Remote Control ........................................................................\
. English-30
Controlling the LCD monitor via LAN Control ........................................................................\
............ .......... English-31
Features ........................................................................\
............................................... ................................ English-34
Troubleshooting ........................................................................\
........................................ ........................... English-35
Specifications ........................................................................\
......................................... .............................. English-36
Pin Assignment ........................................................................\
......................................... ........................... English-37
Manufacturer’s Recycling and Energy Information ........................................................................\
........ ...... English-38
www.necdisplaysolutions.com 
						

							
English-1
EnglishFor USA
FCC Information
1. Use the attached specified cables with the MultiSync X462HB (X462HB) c\
olor display so as not to interfere with radio andtelevision reception.
(1) Please use the supplied power cord or equivalent to ensure FCC complianc\
e.
(2) Please use a good quality shielded video signal cable.
Use of other cables and adapters may cause interference with radio and t\
elevision reception.
2. This equipment has been tested and found to comply with the limits for a\
 class A digital device, pursuant to Part 15 of the F CC
Rules. These limits are designed to provide reasonable protection agains\
t harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, an\
d can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause \
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause har\
mful interference in which case the user will be requir ed
to correct the interference at his own expense.
If necessary, the user should contact the dealer or an experienced radio\
/television technician for additional suggestions.
The user may find the following booklet, prepared by the Federal Communications C\
ommission, helpful: “How to Identify
and Resolve Radio-TV Interference Problems.” This booklet is available fr\
om the U.S. Government Printing Office, Washington,
D.C., 20402, Stock No. 004-000-00345-4.
For Canada
Canadian Department of Communications Compliance Statement
DOC: This Class A digital apparatus meets all requirements of the Canadian Interference-C\
ausing Equipment Regulations.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulation\
s according to CAN/CSA C22.2 No. 60950-1.
Windows is a registered trademark of Microsoft Corporation. NEC is a reg\
istered trademark of NEC
Corporation.
OmniColor is a registered trademark of NEC Display Solutions Europe GmbH\
 in the countries of EU and
Switzerland.
DisplayPort is trademarks of Video Electronics Standards Association.
All other brands and product names are trademarks or registered trademar\
ks of their respective owners.
HDMI, the HDMI logo and High-Definition Multimedia Interface are tradema\
rks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
Declaration of conformity 
						

							
English-2
Important Information
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT
USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS
THE PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROMWALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE
POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns user that uninsulated voltage within the unit may have\
 sufficient magnitude to cause
electric shock. Therefore, it is dangerous to make any kind of contact with any part ins\
ide this unit.
This symbol alerts the user that important literature concerning the ope\
ration and maintenance of this unit
has been included. Therefore, it should be read carefully in order to avoid any problems.
Declaration
Declaration of the Manufacturer
We hereby certify that the color monitor MultiSync
X462HB (X462HB) is in compliance with
Council Directive 2006/95/EC: – EN 60950-1
Council Directive 2004/108/EC: – EN 55022
– EN 61000-3-2
– EN 61000-3-3
– EN 55024
Council Directive 2009/125/EC: EC No. 642/2009
– EN 62301:2005 and marked with
NEC Display Solutions, Ltd.4-13-23, Shibaura,Minato-Ku
Tokyo 108-0023, Japan
CAUTION:  Please use the power cord provided with this display in accordance with\
 the table below. If a power cord is not
supplied with this equipment, please contact your supplier. For all other cases, please use a power cord that matches the
AC voltage of the power outlet and has been approved by and complies wit\
h the safety standard of your particular country.
* When operating the MultiSync X462HB (X462HB) monitor with its AC 125-240V power supply, use a power supply cord that
matches the power supply voltage of the AC power outlet being used.
NOTE: This product can only be serviced in the country where it was purchased.\
Plug Type North America European
Continental U.K. Chinese Japanese
Plug Shape
Region
Voltage U.S.A./Canada
U.K. China Japan
EU (except U.K.)
120* 230 220 100 230
• The intended primary use of this product is as an Information Technical Equipment in an offi ce or domestic environment.
• The product is intended to be connected to a computer and is not intende\
d for the display of television broadcast signals.
Warning
This is a class A product. In a domestic environment this product may cause radio interfe\
rence in which case the user may be required to take adequate measures. 
						

							
English-3
EnglishFOR OPTIMUM PERFORMANCE, PLEASE NOTE THEFOLLOWING WHEN SETTING UP AND USING THE MULTI-FUNCTION MONITOR:
• DO NOT OPEN THE MONITOR . There are no user
serviceable parts inside and opening or removing covers
may expose you to dangerous shock hazards or other risks.
Refer all servicing to qualified service personnel.
• Do not spill any liquids into the cabinet or use your monitor near water.
• Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage points, which can be
harmful or fatal or may cause electric shock, fire or
equipment failure.
• Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fire.
• Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall, causing serious
damage to the monitor.
• Do not mount this product face up, face down or upside down for an extended period of time as it may cause
permanent damage to the screen.
• The power supply cord you use must have been approved by and comply with the safety standards of your country.
(Type H05VV-F 3G 1mm
2 should be used in Europe)
• In UK, use a BS-approved power cord with molded plug having a black (13A) fuse installed for use with this monitor.
• Do not place any objects onto the monitor and do not use the monitor outdoors.
•
The lamps in this product contain mercury. Please
dispose according to state, local or federal law.
• Do not bend, crimp or otherwise damage the power cord.
• If glass is broken, handle with care.
• Do not cover vent on monitor.
• Do not use monitor in high temperature, humid, dusty, or oily areas.
• If monitor or glass is broken, do not come in contact with the liquid crystal and handle with care.
• Allow adequate ventilation around the monitor, so that heat can properly dissipate. Do not block ventilated openings or
place the monitor near a radiator or other heat sources.
Do not put anything on top of the monitor.
• The power cable connector is the primary means of detaching the system from the power supply. The monitor should be
installed close to a power outlet, which is easily accessible.
•
Do not move or mount this product by hanging a rope or wire
to the backside handle.
Do not mount or secure this product by using the backside
handle. It may fall and cause personal injury.
• Handle with care when transporting. Save packaging for transporting.
• Please clean the holes of back cabinet to reject dirt and dust at least once a month because of set reliability.
• When using a LAN cable, do not connect to a peripheral device with wiring that might have excessive voltage.
Connecting to a TV*
• Cable distribution system should be grounded (earthed) in accordance with ANSI/NFPA 70, the National Electrical
Code (NEC), in particular Section 820.93, Grounding of
Outer Conductive Shield of a Coaxial Cable.
• The screen of the coaxial cable is intended to be connected to earth in the building installation. Immediately unplug your monitor from the wall outlet and refer
servicing to qualified service personnel under the following
conditions:
• When the power supply cord or plug is damaged.
•
If liquid has been spilled, or objects have fallen into the monitor.
• If the monitor has been exposed to rain or water.
• If the monitor has been dropped or the cabinet damaged.
• If you notice any structural damage such as cracks or
unnatural wobbling.
• If the monitor does not operate normally by following operating instructions.
Recommended Use
• For optimum performance, allow 20 minutes for warm-up.
• Rest your eyes periodically by focusing on an object at least5 feet away. Blink often.
• Position the monitor at a 90° angle to windows and other light sources to minimize glare and reflections.
• Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any cleaning solution or glass cleaner!
• Adjust the monitor’s brightness, contrast and sharpness controls to enhance readability.
• Avoid displaying fixed patterns on the monitor for long periods of time to avoid image persistence (after image
effects).
• Get regular eye checkups.
Ergonomics
To realize the maximum ergonomic benefits, we recommend
the following:
• Use the preset Size and Position controls with standard signals.
• Use the preset Color Setting.
• Use non-interlaced signals.
• Do not use primary color blue on a dark background, as it is difficult to see and may produce eye fatigue due to
insufficient contrast.
Cleaning the LCD Panel
• When the liquid crystal panel is dusty, please gently wipewith a soft cloth.
• Please do not rub the LCD panel with hard material.
• Please do not apply pressure to the LCD surface.
• Please do not use OA cleaner as it will cause deterioration or discolor on the LCD surface.
Cleaning the Cabinet
• Unplug the power supply
• Gently wipe the cabinet with a soft cloth
• To clean the cabinet, dampen the cloth with a neutraldetergent and water, wipe the cabinet and follow with a dry
cloth.
NOTE: DO NOT clean with benzene thinner, alkaline detergent,
alcoholic system detergent, glass cleaner, wax, polish
cleaner, soap powder, or insecticide. Rubber or vinyl
should not be in contact with the cabinet for an
extended period of time. These types of fluids and
materials can cause the paint to deteriorate, crack or
peel.
Safety Precautions, Maintenance & Recommended Use
* The product you purchased may not have this feature. 
						

							
English-4
Contents
Power Cord*1
Setup ManualClamp x 3
Your new MultiSync monitor box* should contain the following:
• LCD monitor
• Power cord*
1
• Video Signal Cable
• Wireless Remote Control and AA Batteries
• Setup Manual
• Cable cover
• Clamp x 3
• Screw (M4 x 10) x 9
• CD-ROM
• Thumbscrew for optional stand x 2*
2
CD-ROMScrew (M4 x 10) x 9
* Remember to save your original box and packing material to transport or \
ship the monitor.
*
1Type and number of power cords included will depend on the where the LCD \
monitor is to be shipped. When more than
one power cord is included, please use a power cord that matches the AC voltage of the power outlet and has been
approved by and complies with the safety standard of your particular cou\
ntry.
*
2Installed on the display.
Thumbscrew for
optional stand x 2*2
Setup Manual
Cable cover
Video Signal Cable
(Mini D-SUB 15 pin to Mini D-SUB 15 pin)
Wireless Remote Controland AA  Batteries 
						

							
English-5
EnglishThis device cannot be used or installed without the TabletopStand or other mounting accessory for support. For properinstallation it is strongly recommended to use a trained,NEC authorized service person. Failure to follow NECstandard mounting procedures could result in damage to theequipment or injury to the user or installer. Product warrantydoes not cover damage caused by improper installation.Failure to follow these recommendations could result invoiding the warranty.
Mounting
DO NOT mount the monitor yourself. Please ask dealer. For
proper installation it is strongly recommended to use a
trained, qualified technician. Please inspect the location
where the unit is to be mounted. Mounting on wall or ceiling
is the customer’s responsibility. Not all walls or ceilings are
capable of supporting the weight of the unit. Product
warranty does not cover damage caused by improper
installation, remodelling, or natural disasters. Failure to
comply with these recommendations could result in voiding
the warranty.
DO NOT block ventilated openings with mounting
accessories or other accessories.
For NEC Qualified Personnel:
To ensure safe installation, use two or more brackets to
mount the unit. Mount the unit to at least two points on the
installation location.
Please note the following when mounting
on wall or ceiling
• When using mounting accessories other than those that are NEC approved, they must comply with the VESA-
compatible (FDMlv1) mounting method.
• NEC strongly recommends using size M6 screws
(11-12 mm + thickness of
bracket and washer in
length). If using screws
longer than 11-12 mm,
check the depth of the hole.
(Recommended Fasten
Force: 470 - 635N•cm)
NEC recommends mounting
interfaces that comply with
UL1678 standard in North
America.
• Prior to mounting, inspect the installation location to insure that it is strong enough to support the weight of
the unit so that the unit will be safe from harm.
• Refer to the instructions included with the mounting equipment for detailed information.
• Make sure there is no gap between the monitor and the bracket.
Installation
Mounting location
• The ceiling and wall must be strong enough to supportthe monitor and mounting accessories.
• DO NOT install in locations where a door or gate can hit the unit.
• DO NOT install in areas where the unit will be subjected to strong vibrations and dust.
• DO NOT install near where the main power supply enters the building.
• Do not install in where people can easily grab and hang onto the unit or the mounting apparatus.
• When mounting in a recessed area, as in a wall, leave at least 4 inches (100 mm) of space between the monitor
and the wall for proper ventilation.
• Allow adequate ventilation or provide air conditioning around the monitor, so that heat can properly dissipate
away from the unit and mounting apparatus.
Mounting on ceiling
• Ensure that the ceiling is sturdy enough to support theweight of the unit and the mounting apparatus over time,
against earthquakes, unexpected vibrations, and other
external forces.
• Be sure the unit is mounted to a solid structure within the ceiling, such as a support beam. Secure the monitor
using bolts, spring lock washers, washer and nut.
• DO NOT mount to areas that have no supporting internal structure. DO NOT use wood screws or anchor screws
for mounting. DO NOT mount the unit to trim or to
hanging fixtures.
Maintenance
• Periodically check for loose screws, gaps, distortions, orother problems that may occur with the mounting
apparatus. If a problem is detected, please refer to
qualified personnel for service.
• Regularly check the mounting location for signs of damage or weakness that may occur over time.
Orientation
• When using the display in the portrait position, themonitor should be rotated clockwise so that the left side
is moved to the top and the LED indicator light is on the
bottom. This will allow for proper ventilation and will
extend the lifetime of the monitor. Improper ventilation
may shorten the lifetime of the monitor.
LED Indicator
Mounting
Bracket Screw
Washer
Unit
11-12 mmThickness
of bracket
and washer
Screw length should equal
depth of hole (11-12 mm) + the
thickness of mounting bracket
and washer. Bracket hole
should be under 
 8.5 mm.
under
  8.5 mm
No gap 
						

							
English-6
Attaching Mounting Accessories
The display is designed for use with the VESA mounting
system.
1. Attach Mounting Accessories
Be careful to avoid tipping monitor when attaching
accessories.
Mounting accessories can be attached with the monitor in
the face down position. To avoid damaging the screen face,
place the protective sheet on the table underneath the LCD.
The protective sheet was wrapped around the LCD in the
original packaging. Make sure there is nothing on the table
that can damage the monitor.
When using mounting accessories other than NEC
compliant and approved, they must comply with the VESA-
compatible mounting method.
2. Installing and removing optional tabletop stand
CAUTION:  Installing and removing the stand must be done
by two or more people.
To install, follow those instructions included with the stand or
mounting apparatus. Use only those devices recommended
by the manufacturer.
NOTE: Before using optional table top stand, remove
installed thumbscrews from the display first.
Use ONLY thumbscrews which are installed
on the display.
Handle with care when mounting LCD monitor stand and
avoid pinching your fingers.
Screw Cord or chain
Clamp
Allow adequate ventilation or provide air conditioning around
the monitor, so that heat can properly dissipate away from
the unit and mounting apparatus; especially when you use
monitors in multiple screen.
4. Prevent Tipping
When using the display with the optional table top stand,
fasten the LCD to a wall using a cord or chain that can
support the weight of the monitor in order to prevent the
monitor from falling. Fasten the cord or chain to the monitor
using the provided clamps and screws.
304 mm
3. Ventilation Requirements
When mounting in an enclosed space or recessed area,
leave adequate room between the monitor and the
enclosure to allow heat to disperse, as shown below.
Optional table top stand
Table Protective Sheet
Before attaching the LCD monitor to the wall, make sure
that the wall can support the weight of the monitor.
Be sure to remove the cord or chain from the wall before
moving the LCD.
Screw Holes
NOTE:Place stand onto monitor so that the long end of the
feet are in the front.
VESA Mounting Interface
300 mm
300 mm 
						

							
English-7
English
 EXIT button
Activates the OSD menu when the OSD menu is turned-off.
Acts as EXIT button within the OSD to move to previous
menu.
  Remote control sensor and Power Indicator
Receives the signal from the remote control (when using the
wireless remote control). See also page 11.
Glows green when the LCD monitor is in active mode*.
Glows red when the LCD is in POWER OFF (ECO standby)
mode. Glows amber when the LCD is in POWER OFF
(standby) mode. Blinks amber when the monitor is in Power
Save Mode. Green and Amber blink alternately while in
Power Standby mode with the “SCHEDULE SETTINGS”
function enabled. When a component failure is detected
within the monitor, the indicator will blink red.
* If “OFF” is selected in “POWER INDICATOR” (see page 23),
LED will not light when the LCD monitor is in active mode.
 AMBIENT LIGHT SENSOR
Detects the level of ambient light, allowing the monitor to
make automatic adjustments to the brightness setting,
resulting in a more comfortable viewing experience.
Do not cover this sensor. See page 18.
Control Key Lock Mode
This control completely locks out access to all Control Key
functions. To activate the control key lock function, press both
 and  and hold down simultaneously for more than
3 seconds. To resume user mode, press both 
 and  and
hold simultaneously for more than 3 seconds.
*: The product you purchased may not have this feature.
  POWER button
Switches the power on/off. See also page 16.
  MUTE button
Switches the audio mute ON/OFF.
  INPUT button
Acts as SET button within OSD menu. (Toggle switches
between [DVI], [DPORT], [VGA], [RGB/HV], [HDMI],
[DVD/HD1], [DVD/HD2], [SCART], [VIDEO1], [VIDEO2],
[S-VIDEO] or [TV]*). These are available input only, shown
as their factory preset name.
  PLUS button
Acts as (+) button to increase the adjustment with OSD menu.
Increases the audio output level when the OSD menu is
turned off.
  MINUS button
Acts as (-) button to decrease the adjustment with OSD menu.
Decreases the audio output level when the OSD menu is
turned off.
  UP button
Activates the OSD menu when the OSD menu is turned-off.
Acts as 
 button to move the highlighted area up to select
adjustment items within OSD menu.
 DOWN button
Activates the OSD menu when the OSD menu is turned-off.
Acts as 
 button to move the highlighted area down to
select adjustment items within OSD menu.
Control Panel
Parts Name and Functions 
						

							
English-8
Terminal Panel
Out
In
RGBHVRGB/HVRGBHVDVD/HD2 Pr Y Pb
VIDEO2VIDEO
 VIDEO IN connector (BNC and RCA)
To input a composite video signal. BNC and RCA connectors
are not available at the same time (Use only one input).
  VIDEO OUT connector (BNC)
To output the composite video signal from the VIDEO IN
connector.
  DVD/HD connector (RCA)
Connecting equipment such as a DVD player, HDTV device,
or Set-Top-Box.
 S-VIDEO IN connector (Mini DIN 4 pin)
To input the S-video (Y/C separate signal).
 AUDIO IN 1, 2, 3
To input audio signal from external equipment such as a
computer, VCR or DVD player.
  AUDIO OUT
To output the audio signal from the AUDIO IN 1, 2, 3,
DPORT, HDMI, and TV jack to an external device
(stereo receiver, amplifier, etc.).
 EXTERNAL CONTROL (D-Sub 9 pin)
IN connector:  Connect RS-232C input from external
equipment such as a PC in order to control RS-232C
functions.
OUT connector:  Connect RS-232C output. To connect
multiple MultiSync monitors via RS-232C daisy Chain.
 LAN port (RJ-45)
LAN connection. See page 31.
 REMOTE IN/OUT
Use the optional wired remote control by connecting it to
your monitor.
NOTE:  When you use Remote IN/OUT, IR CONTROL in
OSD menu should be NORMAL.
 Main Power Switch
On/Off switch to turn main power ON/OFF.
 AC IN connector
Connects with the supplied power cord.
 DISPLAYPORT connector
To input DisplayPort signals.
 HDMI connector
To input digital HDMI signals.
 DVI IN (DVI-D)
To input digital RGB signals from a computer or HDTV
device having a digital RGB output.
* This connector does not support analog input.
 VGA IN (mini D-Sub 15 pin)
To input analog RGB signals from a personal computer or
from other RGB equipment.
 RGB/HV IN [R, G, B, H, V] (BNC)
To input analog RGB signals or signals from other RGB
equipment.
This is also to connect equipment such as a DVD player,
HDTV device and Set-Top-Box. A Sync-on-Green signal can
be connected to the G connector.
This input can be used with an RGB, DVD/HD or Video
source. Please select signal type in TERMINAL SETTING.
 RGB/HV OUT (BNC)
To output the signal from the RGB/HV IN connector or
VGA IN connector which is on screen to an input on a
separate device. If both signals are not on screen, outputs
the signal from RGB/HV IN connector.
R L
Out
In
L (OUT)
R (OUT)
R, Cr/Pr
(OUT) G, Y, VIDEO
(OUT) B, Cb/Pb
(OUT) H
(OUT) V
(OUT) Y Cb/Pb L/R
(IN1) L
(IN2) L
(IN3)
R, Cr/Pr (IN) G, Y, VIDEO
(IN) B, Cb/Pb
(IN) H
(IN) V
(IN) Cr/Pr R
(IN2)R
(IN3)