NEC Tapi User Guide

							 
Client Installation
 
TAPI 
 
4.0 User Guide
 
 7
 
TAPI
 
Now, you are ready to use TAPI application from your client PC. To test 
your client installation, launch 
 
Phone Dialer
 
 from 
 
Start=>Programs=>Accessories.
 
 Enter a number to call in the 
 
Number to 
Dial
 
 box and then click on 
 
Dial
 
 button. If the installation is correct, your 
extension should ring and once you pick up the telephone handset, the 
system will dial the number you entered and you will be connected to that 
number.
If it does not work or if you need to change any of your configuration 
parameters, 
• Go to 
 
Start=>Settings=>Control Panel=>Telephony
 
.  (In the case of 
Windows 2000, go to 
 
Start=>Settings=>Control Panel=>Modem 
and Phone Options
 
)
• Click on the 
 
Telephony Drivers
 
 tab.  (In the case of Windows 2000, 
click on the 
 
Advanced
 
 tab)
• You should see an entry called 
 
Communications Service Provider
 
. 
Choose this entry and click on the 
 
Configure
 
 button. 
• You will get a dialog box with an entry for your extension. Select that 
entry, and click on the 
 
Configure
 
 button.
• You will now see a dialog that displays all of the detected devices 
from NCS Serv. Click on the 
 
Configure
 
 button. You will get a dialog 
box with an entry for your extension.
• To change any parameters, you should delete this entry and create a 
new entry with the new values.
• To delete an entry, click on the 
 
Extension
 
 button. In the new dialog 
box, enter the extension number and password of the entry you want 
to delete and click on the 
 
Delete
 
 button.
• To add an entry, click on the 
 
Extension
 
 button. In the new dialog box, 
enter the extension number and password of the entry you want to add 
and click on the 
 
Add
 
 button. 
						

							 
Using TAPI with NCS Ware 4.0 
 
8
 
TAPI 
 
4.0 User Guide
 
Restrictions and Exceptions 
In NCS Ware 4.0, 
 
only
 
 outbound dialing functions are supported in the 
TAPI gateway. With this support, a client application can make outbound 
calls from an extension.
TAPI call control functions such as transfer, hold, park, etc. are 
 
not
 
 
supported in NCS Ware 4.0.