NEC PX 60XM5 User Manual

En-30

 Special characters in the PROGRAM TIMER
screen
When the setting item includes gray indication, it does
not function under the timer’s setting.
PROGRAM TIMER
DAY
MON
TUE
SAT
*FRI
—
SAT
*
—INPUT
RGB2
—
VIDEO1
DVD1
—
—
RGB1
—FUNC.
INV.
—
WHITE
—
—
REP.1
—
— ON
08 : 30
- - : - -
 08 : 30
08 : 30
- - : - -
 08 : 30
15 : 30
- - : - -OFF
10 : 30
18 : 15
12 : 15
10 : 00
- - : - - 12 : 15
16 : 00
- - : - - 1
2
3
4
5
6
7
8
• An asterisk “*” in the DAY field
An asterisk “*” means “every” or “everyday”. For...

En-31
The “REPEAT TIMER” screen appears.
Adjust the items.
Use the 
 and  buttons to select “SINGLE”.
Use the 
 and  buttons to select the item, then press the 

and  buttons to set.
SEL. ADJ. RETURN
1 WORK TIME
   INPUT MODE
    
2 WORK TIME
   INPUT MODE:   00H10M 
:   VIDEO1 
:   00H15M
:   DVD1
EXIT
REPEAT TIMER
:   SINGLE REPEAT TIMER
Information

 REPEAT TIMER function
* The two repeat timers run consecutively, i.e., Timer 1-
Timer 2-Timer1-Timer2.
* This becomes effective when the on-screen...

En-32
Enabling/disabling remote control wireless
transmission
This function enables/disables remote control wireless
transmission.
Example: Setting “OFF”
On “IR REMOTE” of “OPTION3” menu, select “OFF”, then
press the MENU/ENTER button.
SEL. ADJ. RETURN
OPTION 3 3 / 4
      PREVIOUS PAGE
TIMER
PWR. ON MODE
CONTROL LOCK
IR REMOTE
LOOP OUT 
REMOTE ID
ID NUMBER
VIDEO WALL
      NEXT PAGE:   OFF 
:   OFF 
:   OFF
:   ALL
:   ALL
EXIT
Information

 IR REMOTE settings
ON: Enables remote control wireless...

En-33
Video Wall setting
Use this feature to configure a (22, 33, 44, 55,
51, 15) video wall.
On “OPTION3” menu, select “VIDEO WALL”, then press
the MENU/ENTER button.
The “VIDEO WALL” screen appears.
SEL. ADJ. RETURN
VIDEO WALL
DIVIDER
POSITION
DISP. MODE
AUTO ID
IMAGE ADJUST
P. ON DELAY
PLE LINK:   OFF 
:   SPLIT 
:   OFF 
:   OFF 
:   OFF
EXIT
Note: A contingency method of shutting off the electric
power should be used in cases of emergency during video
wall setup.
DIVIDER
Set the video wall....

En-34
IMAGE ADJUST
The position of the image can be adjusted and flickering
of the image can be corrected.
Example: Adjusting the vertical position
On “VIDEO WALL” menu, select “IMAGE  ADJUST”, then
press the MENU/ENTER button.
The “IMAGE ADJUST” screen appears.
On “V-POSITION” of “IMAGE ADJUST” menu, adjust the
position.
SEL. ADJ. RETURN
IMAGE ADJUST
ASPECT MODE
V-POSITION
H-POSITION
V-HEIGHT
H-WIDTH
AUTO PICTURE
FINE PICTURE
PICTURE ADJ.
UNDERSCAN:   NORMAL
:   OFF
:   OFF: ±
0
: ±
0
:   0
:   0 
:   0...

En-35
Option4 Settings Menu
Set “ADVANCED OSM” to “ON” in the MAIN MENU.
Removing the sub screen area when there is
no input signal detected for the sub picture
This function automatically removes the black frame of
the sub screen when there is no sub screen input signal.
This feature is available only when the picuture-in-picuture
mode is selected.
Example: Setting “DISPLAY” to “FADE”
On “SUB. PICTURE” of “OPTION4” menu, press the
MENU/ENTER button.
The “SUB. PICTURE” screen appears.
Adjust the items....

En-36
RGB1
RGB1RGB1
RGB1
RGB1RGB1
Side-by-Side Picture-in-Picture
SELECT/
FREEZE
buttonSELECT/
FREEZE
button
S BY S1
RGB1RGB1
or
S BY S2
Switching the input source quickly
This feature enables quick input selection.
After setting ON, press the CLEAR/SEAMLESS SW
button for quick switching between the two selected input
signals.
Example: Set to switch quickly between RGB1 and
RGB2.
On “SEAMLESS SW” of “OPTION4” menu, select “ON”.
Select “RGB1” and “RGB2”.
SEL. ADJ. RETURN
OPTION 4 4 / 4
      PREVIOUS...

En-37
Color System Settings Menu
Setting the video signal format
Use these operations to set the color systems of composite
video signals or Y/C input signals.
Example: Setting the color system to “3.58 NTSC”
On the MAIN MENU, select “COLOR SYSTEM”, then press
the MENU/ENTER button.
The “COLOR SYSTEM” screen appears.
On “COLOR SYSTEM”, select “ 3.58NTSC ”.
RETURN
COLOR SYSTEM
COLOR SYSTEM
:   3.58NTSC 
EXITADJ.
Information

 Video signal formats
Different countries use different formats for video...

En-38
Application
These specifications cover the communications control of
the plasma monitor by external equipment.
Connections
Connections are made as described below.
Connector on the plasma monitor side: EXTERNAL
CONTROL connector.
Use a crossed (reverse) cable.
Type of connector: D-Sub 9-pin male
15
9
62
34
78
Communication Parameters
(1) Communication system Asynchronous
(2) Interface RS-232C
(3) Baud rate 9600 bps
(4) Data length 8 bits
(5) Parity Odd
(6) Stop bit 1 bit
(7) Communication code Hex...

En-39
1/8 Stereo Mini Jack (not supplied)
for REMOTE IN/OUT
Plasma monitor REMOTE IN
Plasma monitor REMOTE OUT
GND VDD (DC +3 V)DATA (DC +5 V)
GNDDATA (C-MOS DC +5 V)
Following is the connection example of STB (Set-top Box)
using the REMOTE IN/OUT connectors of the plasma
monitor. Consult your dealer about the actual connection
and operation.
* Connection Example
• STB has the REMOTE IN connector.
• The pin assignment of the REMOTE IN connector of
STB is same as that of 1/8 stereo mini cable connected
to...