NEC Projector VE303 User Manual

4
Product Features
■ High resolution   
True 800x600(SVGA)/1024x768(XGA) resolution. 
■ HDMI input port provides digital signal  
The HDMI input provide HDCP compatible digital signals. 
The HDMI input also supports audio signal.
■ Quick Power Off, Direct Power Off  
The projector can be put away immediately after the projector 
is powered on. No cool down period is required after the 
projector is turned off from the remote control or cabinet 
control panel.  
The projector has a feature called “Direct...

5
Power Cord x1
Remote Control(P/N:7N901052)Projector
Package Overview
This projector comes with all the items shown below. Check 
to make sure your unit is completed. Contact your dealer 
immediately if anything is missing.
	Due to the difference in applications for each country, some regions may have different accessories.
Documentation: 
		NEC Projector CD-ROM
			(P/N: 7N952291)
		Quick Setup Guide  (P/N: 7N8N6421)
		Important Information  (P/N: 7N8N6411) 
Batteries (AAAx2)
For North America:
...

6
1. Exhaust Vent
2. Focus Ring
3. Control Panel
4. Zoom Lever
5. Intake Vent
6. Security Lock Hunger 
7. Remote Control Sensor
Projector
Product Overview
8. Lens
9. Tilt Foot
10. Ports
11. KensingtonTM Lock Port
12. Speaker
13. Lamp Cover
234
5
1
6
78
10
9
11
9
12
13 
English ... 
Introduction  

7
Ports
1. SERVICE Port (for service 
purpose only)
2. HDMI IN Port
3. COMPUTER IN Port
4. PC CONTROL Port
5. VIDEO IN Port
6. AUDIO IN Jack (3.5mm mini 
jack)
7. KensingtonTM Lock  Port
8. AC IN Terminal
1
7
23456
8 
... English 
Introduction  

8
Control Panel
1VOLUME -Decrease speaker volume.
2Four  
Directional 
Select Keys
- Use  ,  ,  or  to select items 
or make adjustments to your 
selection.
- Use as Quick Keys. Please see 
page 13.
3VOLUME +Increase speaker volume.
4LAMP LEDIndicate the projector’s lamp 
status.
5STATUS LEDIndicate the projector’s various 
status.
6POWER LEDIndicate the projector’s status.
	For controlling the speaker volume, 
use  or .
1124
5
6
13
789101112 
English ... 
Introduction      

9
7POWERTurn the projector on/off. Please 
see the “Power On/Off the 
Projector” section on pages 26-27.
8EXITPress to exit the OSD menu.
9SOURCEPress “SOURCE” to select an 
input signal.
10MENUPress “MENU” to launch the 
Onscreen display (OSD), back to 
the top level of OSD for the OSD 
main menu operation.
11KEYSTONE
Correction
Adjust the image to compensate 
for distortion caused by tilting the 
projector (vertical ± 40 degrees).
12ENTERConfirm your section of items in 
sub menu operation. 
......

10
Remote Control
1POWER ONPower on the projector. Please 
see the “Power On/Off the 
Projector” section on pages  
26-27.
2POWER OFFPower off the projector. Please 
see the “Power On/Off the 
Projector” section on pages  
26-27.
345
18
10
11
13
19
24
26
28
30
27
12
1162
823
21
9
25
14
29
31
17
15
67
20
22 
English ... 
Introduction  

11
3COMPUTER 1Press “1” to choose Computer IN 
port.
4COMPUTER 2 No function.
5HDMI 1Press “4” to choose HDMI port.
6VIDEOPress “7” to choose VIDEO  IN 
port.
7USB-ANo function.
8ID SETPress ID SET for indicating the 
ID number.
9AV-MUTEMomentarily turn off/on the 
audio and video.
10MENUPress “MENU” to launch the on 
screen display (OSD), back to 
the top level of OSD for the OSD 
main menu operation
11D-ZOOMZoom in/out the projected 
image. 
12KEYSTONE  
Correction
Adjust the image to compensate 
for...

12
20USB-BNo function.
21Number ButtonNo function.
22LANNo function.
23CLEARClear the password while you 
input the password.
24FREEZETo pause the screen image. 
Press again to resume the screen 
image.
25EXITExit the settings.
26ENTERConfirm your section of items in 
sub menu operation.
27Four  
Directional 
Select Buttons
- Use the  ,  ,  , or  button 
to select items or make 
adjustments to your selection. 
When the image is magnified 
by using the D-ZOOM+ button, 
the  ,  ,  , or  button 
moves the...

13
Quick Key Activate Behavior
Quick keys are available when no OSD is displayed.
The Quick Keys can be accessed on Control Panel or remote 
control (). 
The behavior of the Quick Keys is as described in the following 
table:
Quick KeyFunctionActivate Condition
LEFT ()/
RIGHT ()
Pop Volume OSD and allow 
user to adjust.No OSD 
DisplayUP ()/ 
DOWN ()
Pop Vertical Keystone OSD 
and allow user to adjust. 
... English 
Introduction