NEC Projector UM301W User Manual

10
1. Introduction
Remote Control Precautions
•	 Handle	the	remote	control	carefully.
•	 If	the	remote	control	gets	wet,	wipe	it	dry	immediately.
•	 Avoid	excessive	heat	and	humidity.
•	 Do	not	short,	heat,	or	take	apart	batteries.
•	 Do	not	throw	batteries	into	fire.
•	 If	you	will	not	be	using	the	remote	control	for	a	long	time,	remove	the	batteries.
•	 Ensure	that	you	have	the	batteries’	polarity	(+/−)	aligned	correctly.
•	 Do	not	use	new	and	old	batteries	together,	or	use	different	types	of	batteries...

11
1. Introduction
 Software Included on CD-ROM
Names	and	Features	of	Bundled	Software	Programs
Name	of	software	programFeatures
Virtual	Remote	Tool
(Windows	only)
This	is	a	software	 program	used	to	control	 the	power	 ON/OFF	 and	source	 selec-
tion	of	the	 projector	 from	your	computer	 by	using	 the	supplied	 computer	 cable	
(VGA)	and	others. 	(→	page	36)
Name	of	software	programFeatures
Image	Express	Utility	Lite
Image	Express	Utility	Lite	for	
Mac	OS
•	 This	is	a	software	 program	used	to	project...

12
This	section	describes	how	to	turn	on	the	projector	and	to	project	a	picture	onto	the	screen.
1 Flow of Projecting an Image
Step 1
•	 Connecting	your	computer	/	Connecting	the	power	cord	(→ page 13)
 
Step 2 
•	 Turning	on	the	projector	(→ page 14)
 
Step 3 
•	 Selecting	a	source	(→ page 16)
 
Step 4
•	 Adjusting	the	picture	size	and	position	(→ page 17)
•	 Correcting	keystone	distortion	[KEYSTONE]	(→ page 21)
 
Step 5
•	 Adjusting	a	picture	and	sound
- Optimizing a computer signal automatically (→...

13
2. Projecting an Image (Basic Operation)
 Connecting Your Computer/Connecting the Power Cord
1.	 Connect	your	computer	to	the	projector.
 This  section  will  show  you  a  basic  connection  to  a  computer.  For  information  about  other  connections,  see  “6. 
Installation	and	Connections” 	on	page	106.
	 Connect	the	computer	 cable	(VGA)	 between	 the	projector’s	 COMPUTER	 IN	terminal	 and	the	computer’s	 port	(mini	
D-Sub 15 Pin). Turn two thumb screws of both terminals to fix the computer...

14
2. Projecting an Image (Basic Operation)
 Turning on the Projector
•	 Press	the		(POWER) button on the projector cabinet 
or the POWER ON button on the remote control. 
	 The	 POWER	 indicator	 will	blink	 and	the	projector	 will	be-
come ready to use.
TIP:	
•	 When 	the 	message	 “Projector 	is 	locked!	 Enter	your	password.”	
is 	displayed, 	it 	means 	that 	the 	[SECURITY] 	feature 	is 	turned 	on.	
(→	page	33)
  After you turn on your projector, ensure that the computer 
or video source is turned...

15
2. Projecting an Image (Basic Operation)
Note on Startup screen (Menu Language Select screen)
When	you	first	 turn	 on	the	 projector,	 you	will	get	 the	Startup	 menu.	This	 menu	 gives	you	the	opportunity	 to	select	 one	
of	the	30	menu	languages.
To	select	a	menu	language, 	follow	these	steps:
1. Use  the , ,   or   button  to  select  one  of  the  30 
languages from the menu.
2.  Press the ENTER button to execute the selection.
After 	this 	has 	been 	done, 	you 	can 	proceed 	to 	the 	menu...

16
2. Projecting an Image (Basic Operation)
 Selecting a Source
Selecting the computer or video source
NOTE:	Turn	on	the	computer	or	video	source	equipment	connected	to	the	projector.
Detecting	the	Signal	Automatically
Press	the 	SOURCE 	button 	once. 	The 	projector 	will 	search 	for 	the 	available	
input	source	and	display	it. 	The	input	source	will	change	as	follows: 	
COMPUTER	→	HDMI1/MHL	→	HDMI2	→	VIDEO	→	 USB-A	→	LAN	→ 
USB-B
•	 With	 the	SOURCE	 screen	displayed,	 you	can	 press	 the	SOURCE...

17
2. Projecting an Image (Basic Operation)
 Adjusting the Picture Size and Position
Use	the	adjustable	tilt	foot,	the	zoom	function	or	the	focus	ring	to	adjust	the	picture	size	and	position.
In	this	chapter	drawings	and	cables	are	omitted	for	clarity.
Adjusting	horizontal/vertical	position
(→	page	18)
Adjusting	the	focus	[Focus	ring]
(→	page	18)
Finely	adjusting	the	left	and	right	tilt	[Tilt	Foot]
(→	page	19)
Adjusting	the	size	[Digital	Zoom]
(→	page	20)
Correcting	the	keystone	distortion	[Keystone]*...

18
2. Projecting an Image (Basic Operation)
Adjusting horizontal/vertical position
The	throw	 distance	 can	affect	 the	size	 and	the	height	 of	the	 projected	 image.	Before	 installing	 the	projector,	 decide	
the	throw	distance	according	to	 “Setting	Up	the	Screen	and	the	Projector” 	(→	page	103, 104)
It	is	recommended	to	display	the	test	pattern	while	adjusting	the	image. 	(→	page	92)	
1. Move  the  projector  back  and  forth  and  left  and  right  so  that 
the image fits the screen width.
	 You...

19
2. Projecting an Image (Basic Operation)
Adjusting the tilt (Tilt foot)
Adjusting	the	left	and	right	tilt.
1. Rotate the tilt foot to adjust the left and right tilt.
  The tilt foot is equipped at the left and the right front bottom of the 
projector.
	 If	 the	projected	 image	is	tilted,	 rotate	 one	of	the	 tilt	foot	 to	adjust	
the angle to project. 
	 If	 keystone	 distortion	 is	appeared,	 adjust	it	either	 by	the	 button 
on	the	cabinet	or	keystone	button	on	the	remote	control
NOTE:
•	 Do 	not...