NEC Projector Um280wi User Manual

61
3. Convenient Features
 Connecting Your Microphone
 
Connecting	a	commercially	 available	dynamic	microphone	 to	the	 MIC	 input	 jack	allows	 you	to	output	 your	mic	sound	
from	the	built-in	speaker.
Sound	 from	COMPUTER,	 VIDEO,	S-VIDEO,	 and	HDMI	 audio	inputs	 will	be	heard	 from	the	speaker	 with	your	 micro-
phone	voice. 	
Microphone	sensitivity	can	be	adjusted. 	From	 the	menu,	 select	[SETUP]	→	[INSTALLATION]	→	[MIC	 GAIN]. 	(→	page	
92)
NOTE:
•	 The	MIC	input	jack	does	not	support	plugin...

62
4. Using the Viewer
❶ What you can do with the Viewer
The	Viewer	has	the	following	features.
•	 When	 a	commercially	 available	USB	memory	 that	stores	 image	files	is	inserted	 into	the	USB	 port	(Type	 A)	of	the	
projector,	the	 Viewer	allows	you	to	view	the	image	files	on	the	USB	memory.
	 Even	if	no	computer	is	available,	presentations	can	be	conducted	simply	with	the	projector. 	
•	 Supported	graphic	format	is	JPEG.
•	 The	Viewer	displays	 the	thumbnail	 screen	(JPEG	Exif	only)	 on	which	 you	can...

63
4. Using the Viewer
NOTE
•	 The	USB	port	of	the	projector	does	not	support	USB	hub.	
•	 The	following	 operations	 by	using	 the	buttons	 on	the	 projector	 are	not	 possible	 when	the	VIEWER	 screen	such	as	the	 slide	 screen	
and	the	thumbnail	screen	is	displayed.
-	 Keystone	correction	by	using	the	▲/▼	button
-	 Auto	Adjustment	by	using	the	AUTO	ADJ.	button
-	 Volume	control	with	the	◀	or	▶	button
	 To	 perform	 Keystone	 correction	 or	Source	 selection	 during	display	 of	the	 Viewer,	 press	the...

64
4. Using the Viewer
❷ Projecting images stored in a USB memory device
This	section	explains	the	basic	operation	of	the	Viewer.	
The	explanation	 provides	the	operational	 procedure	when	the	Viewer	 toolbar	 (→	page	68)	 is	 set	 to	the	 factory	 de-
fault.
-	Starting	the	 Viewer .......................................................................below
-	Removing	the	USB	memory	from	the	projector  .......................page	66
-	Exiting	the...

65
4. Using the Viewer
4. Press the ENTER button.
  The thumbnail screen will be displayed. (→ page 67)
5. Use the ▲▼◀ or ▶ button to select an icon.
•	 The	→ (arrow) symbol on the right indicates there are more 
pages. pressing the PAGE  ▽ (page down) button will show 
the  next  page:  pressing  the  PAGE  △  (page  up)  will  show 
the previous page.
6.  Press the ENTER button.
  The selected slide will be displayed.
•	 When 	a 	folder 	icon 	is 	selected, 	icons 	contained 	in 	the 	folder	
will be...

66
4. Using the Viewer
Removing the USB memory from the projector
1.	 Select	the	VIEWER	start	screen.
	 Press	the	EXIT	button	with	no	menu	displayed.
2.	 Remove	the	USB	memory	from	the	projector.
	 Make	sure	that	the	LED	 on	the	 USB	 memory	 is	not	 flashing	
before removing the USB memory.
NOTE:	 If	you	 remove	 the	USB	 memory	 from	the	projector	 with	a	slide	
displayed,	 the	projector	 may	not	operate	 correctly.	 If	this	 happens,	
turn	off 	the 	projector 	and 	unplug	 the	power 	cord. 	Wait 	3...

67
4. Using the Viewer
Parts of each screen
The	Viewer	has	four	screens.
(1) Viewer start screen (3) Thumbnail screen (9) Slide screen/
(11) Slideshow screen
NameDescription
(1)	 Viewer	start	screenThis	screen	will	be	displayed	first	when	you	select	the	 Viewer.
(2)	USB	iconThis	icon	indicates	that	the	USB	memory	is	inserted	into	the	projector.
(3)	Thumbnail	screenThis	 screen	 will	show	 a	list	 of	folders	 and	image	 files	stored	 in	the	 USB	 memory. 	The	
JPEG	Exif	files	will	be	displayed	in...

68
4. Using the Viewer
Using the toolbar
1. Press the MENU button.
  The toolbar will be displayed.
 The SOURCE screen will be displayed as Viewer connection screen.
2. Use the ◀ or ▶ button to select an item and use the ▲ or ▼ button to select its available option.
  When the cursor is placed, the selected item will be changed to yellow.
 The ▲ or ▼ shows more available choices.
3. Press the ENTER button.
  The selected item will be displayed.
4. Press the MENU button two times.
  The  toolbar  will  be...

69
4. Using the Viewer
Slide	toolbar
MenuOptionsDescription
(1)	DisplayCloses	the	menu	and	switches	to	the	slide	screen.
Closes	the	menu	and	displays	the	thumbnail	screen.
Closes	the	menu	and	starts	the	slideshow	from	the	highlighted	item.
(2)		Image	
display
Closes	the	menu	and	displays	the	image	in	its	actual	size.
Closes	 the	menu	 and	displays	 the	image	 in	the	 projector’s	 maximum	reso-
lution.
(3)		 Clockwise	
rotation
—Close	the	menu	and	rotate	the	image	90°clockwise
(4)		Counter-
clockwise...

70
4. Using the Viewer
 Converting PowerPoint files to Slides (Viewer PPT Converter 
3.0)
Using	 Viewer	 PPT	Converter	 3.0	contained	 on	the	 supplied	 NEC	Projector	 CD-ROM	 allows	you	to	convert	 Power-
Point	files	into	JPEG	 files.	Converted	 JPEG	files	can	be	saved	 to	a	USB	 memory. 	When	 the	USB	 memory	 inserted	
into	the	projector,	 these	JPEG	 files	can	be	displayed	 with	the	viewer	 function	 of	the	 projector	 without	connecting	 a	
computer.
NOTE:
By	using	PPT	Converter	3.0,	PowerPoint...