NEC Projector Sx4000d User Manual

MultiSync SX6000/SX4000
High Light Output Projection System • Großbildschirm MultiSync-Projektions-System
User’s Manual • Bedienungshandbuch 

MultiSync SX6000/SX4000
High Light Output Projection System
User’s Manual 

E – ii
CAUTION: To turn off main power, be sure to remove the plug from
power outlet. The power outlet socket should be installed as near to
the equipment as possible, and should be easily accessible.
3. GSGV Acoustic Noise Information Ordinance:
The sound pressure level is less than 70 dB(A) according to ISO 3744
or ISO 7779.
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS
UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEP-
TACLE OR OTHER...

E – iii
Fire and Shock Precautions
1. Ensure that there is sufficient ventilation and that vents are unob-
structed to prevent potentially dangerous concentrations of ozone
and the build-up of heat inside your projector. Allow at least 8 inches
(20cm) of space between your projector and a wall. Allow at least 20
inches (50 cm) of space between the ventilation duct outlet and ob-
ject.
2. Prevent foreign objects such as paper clips and bits of paper from
falling into your projector. Do not attempt to...

E – iv
Précautions contre lincendie ou la décharge
1. Sassurer quil y ait une ventilation suffisante et que les ouvertures
ne soient pas obstruées afin déviter des concentrations
potentiellement dangereuses dozone et laccumulation de chaleur à
lintérieur du projecteur. Laisser au moins 20 cm despace entre le
projecteur et un mur.
2. Empêcher tous objets étrangers tels que des attaches trombones ou
des morceaux de papier de tomber à lintérieur du projecteur. Ne pas
essayer de récupérer des objets qui...

E – v
LIMITATION OF IMPLIED WARRANTIES
All implied warranties, including warranties of merchantability and fit-
ness for  a particular purpose, are limited in duration to the length of
this warranty.
EXCLUSION OF DAMAGES
NECTECH’s liability for any defective product is limited to the repair or
replacement of the product at our option. NECTECH shall not be liable
for:
1. Damage to other property caused by any defects in this product,
damages based upon inconvenience, loss of use of the product, loss
of...

E – vi
TABLE OF CONTENTS
Video Adj ........................................................................E-33
Noise Reduction ......................................................E-33
Color Matrix .............................................................E-34
Y/C Delay .................................................................E-34
Telecine...................................................................E-34
Motion Select ...........................................................E-34...

E – 1
Getting Started
The fastest way to get started is to take your time and do everything
right the first time. Taking a few minutes now to review the manual may
save you hours later on. At the beginning of each section of the manual
youll find an overview. If the section doesnt apply, you can skip it.
Whats In The Box?
Make sure your box contains everything listed. If any pieces are miss-
ing, contact your dealer. Please save the original box and packing ma-
terials if you ever need to ship the...

E – 2
1. Part Names and Functions
Stacking Pad (4 pcs)
Digital Input Terminal Panel
Remote Sensor
PC Card Slot
Insert a PC memory
card here to upgrade
the projector system
software or copy
data
Lens (Optional)
Input Terminal Panel
Ventilation (in)
Foot Release Lever (both sides)Ventilation (out)
* To turn on the main power to the projector, press the switch to the ON
position (I) and the POWER indicator on the rear panel will turn am-
ber in color.
Press to the OFF position (0) to turn the main power...

E – 3
LENS SHIFT
ZOOM MENU SELECT
-+
ENTER
ONINDICATOR POWER
STATUS
ON/OFF
OFF
CANCEL FOCUS
11 10 9 8 7 5 4 2
1 3 6
1. Power Button
Press to turn the projector on when the projector is in the standby con-
dition (Main Power switch must be on and the POWER indicator lit am-
ber). Press and hold for 2 seconds to turn off the projector.
2. Power Indicator
When this indicator is green, the projector is on; when the indicator is
amber, it is in standby mode.
NOTE: After the projector is turned off, the...