NEC Projector PX750U2 User Manual

97
Disconnecting the projector from the media server
1.	 Display	the	OPTIONS	menu.
 Press the ▼	button	to	select	the	[OPTIONS]	icon	and	select	the	ENTER	button.
2.	 Display	the	MEDIA	SERVER	setting	screen.
 Press the ▼	button	to	select	the	MEDIA	SERVER	icon	and	press	the	ENTER	button.
3.	 Disable	the	connection.
 Press the ENTER button to clear the checkmark to disable the connection.
 Press the ▼	button	to	select	[OK]	and	press	the	ENTER	button	to	close	the	MEDIA	SERVER	setting	screen.
4. Using the...

98
❻ Restrictions on displaying files
The	Viewer	 allows 	 you 	 to 	 give 	 a 	 simplified 	 display 	 of 	 a 	 PowerPoint 	 file 	 or 	 PDF 	 file.
Due	to	simplified 	displa y, 	ho wever, 	actual 	displa y 	ma y 	be 	diff erent 	from 	the 	one 	on 	y our 	computer 	application 	prog ram.
Some restrictions on PowerPoint files
•	 Fonts	will	be 	automatically 	con verted 	to 	the 	f onts 	installed 	in 	the 	projector .	F onts 	can 	v ary 	in 	siz e 	or 	width, 	causing 	
layout	corruption
	 Some...

99
5. Using On-Screen Menu
❶ Using the Menus
NOTE:	The	on-screen	menu	may	not	be	displayed	correctly	while	interlaced	motion	video	image	is	projected.
1. Press the MENU button on the remote control or the projector cabinet to display the menu.
NOTE: The commands such as ENTER,	EXIT,	▲▼, ◀▶	in	the	bottom	show	available	buttons	for	your	operation.
2. Press the ◀▶ buttons on the remote control or the projector cabinet to display the submenu.
3.	 Press	the	ENTER 	b utton 	on 	the 	remote 	contr ol 	or 	the...

100
❷ Menu Elements
Slide barSolid triangle
Menu modeTa b
Radio button
High Altitude symbol ECO mode symbol
Wireless symbol
Menu	windows	or	dialog	boxes	typically	have	the	following	elements:
Highlight �����������������������������Indicates the selected menu or item� 
Solid triangle ����������������������Indicates further choices are available� A highlighted triangle indicates the item is active� 
Ta b ��������������������������������������Indicates a group of features in a dialog box� Selecting on any...

101
❸ List of Menu Items
Some	menu	items	are	not	available	depending	on	the	input	source.
Menu	ItemDefaultOptions
SOURCE COMPUTER1
*
COMPUTER2 *
COMPUTER3 *
HDMI *
DisplayPort *
VIDEO *
S-VIDEO *
VIEWER *
NETWORK *
SLOT
ENTRY	LISTTEST	PATTERN
ADJUST PICTURE MODE
STANDARD
STANDARD,	PROFESSIONAL
PRESET *HIGH-BRIGHT,	PRESENTATION,	VIDEO, 	 MOVIE, 	 GRAPHIC, 	sRGB
DETAIL	SETTINGS
GENERAL
REFERENCE *HIGH-BRIGHT,	PRESENTATION,	VIDEO , 	 MOVIE, 	 GRAPHIC, 	sRGBGAMMA	CORRECTIONDYNAMIC,	NATURAL,	BLACK	DETAIL...

102
SETUPBASIC
KEYSTONE
HORIZONTAL
0
VERTICAL 0
CORNERSTONE
PIP/PICTURE	BY	PICTURE
PIP/PBP	MODEPIPPIP,	PICTURE	BY	PICTUREPIP	POSITIONBOTTOM-RIGHTTOP-LEFT,	T OP-RIGHT, 	 BOTTOM-LEFT, 	 BOTTOM-RIGHTPIP/PBP	SOURCEOFFOFF,	VIDEO, 	 S-VIDEO
WALL	COLOROFFOFF,	BLACKBOARD,	BLACKBOARD	(GRAY),	LIGHT	YELLOW,	LIGHT	BLUE,	LIGHT	ROSE
LAMP	MODE
ECO	MODEOFFOFF,	ONLAMP	SELECTDUALDUAL,	SINGLE,	LAMP1	ONLY,	LAMP2	ONLYLAMP	INTERVAL	MODE OFFOFF,	12	HOURS,	24	HOURS,	1	WEEK
LAMP	SWITCHING
	TIME 00:0000:00	-	24:00
LAMP	SWITCHING...

103
SETUPOPTIONS(1)
AUTO	ADJUSTNORMALOFF,	NORMAL,	FINE
FAN	MODEAUTOMODE:	
AUTO, 	 HIGH, 	 HIGH 	 ALTITUDE
FLOORSETTING:	FLOOR, 	 CEILING, 	VER TICAL 	TIL T 	 UP, 	VER TICAL 	TILT	DOWN
SIGNAL	SELECT(COMP3)RGB/
COMPONENTRGB/COMPONENT,	VIDEO
SEAMLESS	SWITCHING	(for	PX750U2	only) OFFOFF,	ON
COLOR	SYSTEM
VIDEO
AUTOAUTO,	NTSC3.58,	NTSC4.43,	PAL,	PAL-M,	PAL-N,	PAL60,	SECAM
S-VIDEO AUTOAUTO,	NTSC3.58,	NTSC4.43,	PAL,	PAL-M,	PAL-N,	PAL60,	SECAMCOMPUTER3	(VIDEO)AUTOAUTO,	NTSC3.58,	NTSC4.43,	PAL,	PAL-M,	PAL-N,...

104
❹ Menu Descriptions & Functions [SOURCE]
COMPUTER 1, 2, and 3
Selects	the	computer	connected	to	your	COMPUTER	1,	2,	or	COMPUTER	3	input	connector	signal.
NOTE:	When	the 	component 	input 	signal 	is 	connected 	to 	the 	COMPUTER 	1 	IN, 	COMPUTER 	2 	IN, 	or 	COMPUTER 	3 	IN 	connector , 	select	
[COMPUTER1],	[COMPUTER2]	or 	[COMPUTER3] 	respectively . 	The 	projector 	automatically 	determines 	whether 	the 	COMPUTER1, 	
2,	or	3	input	signal	is	an	RGB	or	component	signal.
HDMI
Selects	the	HDMI...

105
Using	the	Entry	List
When	any	source 	or 	lens 	memor y 	adjustments 	are 	made , 	the 	adjustments 	are 	automatically 	registered 	in 	the 	Entr y 	
List.	The	 (adjustment 	 values 	 of) 	 registered 	 signals 	 can 	 be 	 loaded 	 from 	 the 	 Entry 	 List 	 whenever 	 necessary.
However,	only	up 	to 	100 	patter ns 	can 	be 	registered 	in 	the 	Entr y 	List.	When 	100 	patter ns 	ha ve 	been 	registered 	in 	the 	
Entry	List,	an 	error 	message 	is 	then 	displa yed 	and 	no 	additional 	patter...

106
Entering	the	currently	projected	signal	into	the	Entry	List	[STORE]
1. Press the ▲ or ▼ button to select any number.
2. Press the ◀ or ▶	button	to	select	[STORE]	and	press	the	ENTER	button.
 
Calling	up	a	signal	from	the	Entry	List	[LOAD]
Press	the	▲	or	▼	button	to	select	a	signal	and	press	the	ENTER	button.
Editing	a	signal	from	the	Entry	List	[EDIT]
1. Press the ▲ or ▼ button to select a signal you wish to edit.
2. Press the ◀, ▶, ▲, or ▼	button	to	select	[EDIT]	and	press	the	ENTER	button.
 The...