NEC Projector PX602WL-BK User Manual

128
Cautions	when	using	a	DVI	signal
•	 When	the	computer 	has 	a 	D VI 	output 	ter minal, 	use 	a 	commercially 	a vailable 	con verter 	cab le 	to 	connect 	the 	com-
puter	to	the	projector’s	HDMI	IN	terminal	(only	digital	video	signals	can	be	input).	
HDMI IN
NOTE:	When	Viewing	a	DVI	Digital	Signal
•	 Turn	off	the	power	of	the	computer	and	projector	before	connecting	devices.
•	 When	a	video 	deck 	is 	connected 	via 	a 	scan 	converter , 	etc., 	the 	display 	may 	not 	be 	correct 	during 	fast-for...

129
HDMI IN
HDMI OUT
Connecting an External Monitor
You	can	connect 	a 	separ ate, 	e xternal 	monitor 	to 	y our 	projector 	to 	sim ultaneously 	vie w 	on 	a 	monitor 	the 	computer 	
analog	image	you’re	projecting.
•	 BNC(CV)	component	video	signals	and	BNC(Y/C)	S-video	signals	will	not	be	output.
•	 Please	refer	to	Page	52	when	displaying	the	PIP/PBP	screen.
NOTE:
•	 When	outputting	HDMI 	signals, 	turn 	on 	the 	power 	of 	the 	video 	device 	on 	the 	output 	side 	and 	keep 	it 	connected 	before...

130
Connecting Your Blu-ray Player or Other AV Equipment
Component	video	signal/S-video	signal	connection
•	 Select	the	source	name	for	its	appropriate	input	terminal	after	turning	on	the	projector.
Input	terminalSOURCE	button	on	the	projector	
cabinetButton	on	the	remote	control
BNC(CV)	BNC(CV)VIDEO
BNC(Y/C)
	BNC(Y/C)S-VIDEO
CV YC
BNC¢CV£
BNC
¢Y£
BNC¢C£
BNC	cable	(not	supplied)
Audio	equipment
6. Installation and Connections  

131
Connecting Component Input
•	 Select	the	source	name	for	its	appropriate	input	terminal	after	turning	on	the	projector.
Input	terminalSOURCE	button	on	the	projector	
cabinetButton	on	the	remote	control
COMPUTER	1	IN	COMPUTERCOMPUTER	1
BNC	BNCCOMPUTER	2
NOTE:
•	 When	the	signal 	format 	is 	set 	to 	[AUTO] 	(default 	factor y 	setting 	when 	shipped), 	the 	computer 	signal 	and 	component 	signal 	are 	
automatically	distinguished	and 	switched. 	If 	the 	signals 	cannot 	be 	distinguished, 	select...

132
Connecting HDMI Input
You	can	connect 	the 	HDMI 	output 	of 	y our 	Blu-r ay 	pla yer, 	hard 	disk 	pla yer, 	or 	notebook 	type 	PC 	to 	the 	HDMI 	IN 	ter minal 	
of	your	projector.
Input	terminalSOURCE	button	on	the	projector	
cabinetButton	on	the	remote	control
HDMI	IN	HDMIHDMI
TIP:	For	users	of	audio	video	equipment	with	an	HDMI	terminal:
Select	“Enhanced”	rather	than	“Normal”	if	HDMI	output	is	switchable	between	“Enhanced”	and	“Normal”.
This will provide improved image contrast and more...

133
Connecting to a Wired LAN
The	projector	comes 	standard 	with 	a 	Ether net/HDBaseT 	por t 	(RJ-45) 	which 	pro vides 	a 	LAN 	connection 	using 	a 	LAN 	
cable.	
To	use	a 	LAN 	connection, 	y ou 	are 	required 	to 	set 	the 	LAN 	on 	the 	projector 	men u.	Select 	[SETUP] 	→	[NETWORK	
SETTINGS]	→	[WIRED	LAN].	 (→	page	107).
Example of LAN connection
Example	of	wired	LAN	connection
Ethernet/HDBaseT
Server
Hub
LAN	cable	(not	supplied)
NOTE:	Use 	a 	Categor y 	5 	or 	higher 	LAN 	cable.
6. Installation...

134
Connecting to a HDBaseT transmission device (sold commercially)
HDBaseT	is	a	connection	standard	for	home	appliances	that	is	established	by	the	HDBaseT	Alliance.
Use	a	LAN 	cab le 	sold 	commercially 	to 	connect 	the 	Ether net 	/ 	HDBaseT 	por t 	of 	the 	projector 	(RJ-45) 	to 	a 	HDBaseT 	
transmission	device	sold	commercially.
The	Ethernet/HDBaseT	por t 	of 	the 	projector 	suppor ts 	HDMI 	signals 	(HDCP) 	from 	tr ansmission 	de vices, 	control 	signals	
from	external	devices	(serial,	LAN)	and...

135
Portrait projection (vertical orientation)
By	using	a	safety	cover	(sold	separately),	the	projector	can	be	mounted	
vertically	to	display	computer	images	in	portrait	orientation.
If	the	safety	cover	is	missing,	the	power	will	not	turn	on.
All	screens,	such 	as 	the 	on-screen 	men us, 	will 	be 	rotated 	in 	the 	counter-
clockwise	direction.
The	projector	is	equ ipped 	wi th 	a 	se nsor 	to	aut omatically 	det ect 	the	in stal-
lation	state.
	Precautions	during	installation
•	 Please	do	not 	install...

136
Design and manufacturing conditions for the stand
1.	 To	display	images	in	portrait	orientation,	use	a	safety	cover	(sold	separately).	(→	page	137)
2.	 Please	hire	an 	installation 	ser vice 	pro vider 	(f or 	a 	f ee) 	f or 	the 	design 	and 	man ufacture 	of 	a 	customiz ed 	stand 	to 	be 	
used	for	portrait	projection.	Please 	 ensure 	 that 	 the 	 design 	 complies 	 with 	 the 	 following 	 conditions:
•	 There	is	an	intake	vent	opening	on	the	safety	cover.	Do 	 not 	 obstruct 	 this...

137
Mounting	the	safety	cover	(sold	separately)
The	projector	is 	equipped 	a 	s witch 	f or 	changing 	to 	v ertical 	mount 	por trait 	projection.	Mount 	the 	saf ety 	co ver 	and 	place 	
vertically	to	change	to	vertical	orientation	mode.
1. Insert and tighten the 7 screws (turning clockwise) to mount to the projector.
*	 If	using	in	normal	horizontal	orientation,	make	sure	to	remove	the	safety	cover.
	 To	remove,	unscrew	the	7	screws	(turning	counter-clockwise).
6. Installation and Connections