NEC Projector PX602WL-BK User Manual

78
[IMAGE OPTIONS]
Adjusting	Clock	and	Phase	[CLOCK/PHASE]
This	allows	you	to	manually	adjust	CLOCK	and	PHASE.
CLOCK �������������������Use this item to fine tune the computer image or to remove any vertical banding that might appear� This 
function adjusts the clock frequencies that eliminate the horizontal ban\
ding in the image�
This adjustment may be necessary when you connect your computer for the first time�
PHASE �������������������Use this item to adjust the clock phase or to reduce video noise,...

79
Adjusting	Horizontal/Vertical	Position	[HORIZONTAL/VERTICAL]
Adjusts	the	image	location	horizontally	and	vertically.
•	 An	image	can	be	distorted	during	the	adjustment	of	[CLOCK]	and	[PHASE].	This	 is 	 not 	 malfunction.
•	 The	adjustments	f or 	[CLOCK], 	[PHASE], 	[HORIZONT AL], 	and 	[VER TICAL] 	will 	be 	stored 	in 	memor y 	f or 	the 	
current	signal.	The	ne xt 	time 	y ou 	project 	the 	signal 	with 	the 	same 	resolution, 	hor izontal 	and 	v ertical 	frequency , 	
its	adjustments	will	be...

80
Selecting	the	Aspect	Ratio	[ASPECT	RATIO]
Use	this	function	to	select	the	screen’s	vertical:horizontal	aspect	ratio.
Select	the	screen 	type 	(4:3 	screen, 	16:9 	screen 	or 	16:10 	screen) 	at 	the 	screen 	setting 	bef ore 	setting 	the 	aspect 	r atio.	
(→	page	97)
The	projector	automatically	identifies	the	signal	being	input	and	sets	the	optimum	aspect	ratio.
For Computer signal
For	Component/Video/S-Video	signals
When	the	screen	type	is	set	to	4:3When	the	screen	type	is	set	to	16:9	or	16:10...

81
OptionsFunction
NATIVE
The	projector	displays	the	current	image	in	its	true	resolution	when	the	incoming	computer	signal	has	a	lower	or	higher	resolution	than	the	projector’s	native	resolution.	 (→	page	2)When	the	incoming	computer	signal	has	a	higher	resolution	than	the	projector's	native	resolution,	the	center	of	an	image	will	be	displayed.
LETTER	BOXThe	image	of	a	letterbox	signal	(16:9)	is	stretched	equally	in	the	horizontal	and	vertical	directions	to	fit	the	screen.
WIDE	SCREENThe	image	of	a...

82
[VIDEO]
Using	Noise	Reduction	[NOISE	REDUCTION]
When	projecting	a 	video 	image , 	y ou 	can 	use 	the 	[NOISE 	REDUCTION] 	function 	to 	reduce 	the 	screen 	noise 	(roughness	
and	distortion).	This	de vice 	is 	equipped 	with 	three 	types 	of 	noise 	reduction 	functions .	Select 	the 	function 	according 	to 	
the	type	of 	noise .	Depending 	on 	the 	noise 	le vel, 	the 	noise 	reduction 	eff ect 	can 	be 	set 	to 	[OFF], 	[LO W], 	[MEDIUM] 	or 	
[HIGH].	[NOISE 	 REDUCTION] 	 can 	 be 	 selected...

83
[SIGNAL	TYPE]
Selection	of	RGB 	and 	component 	signals .	Nor mally, 	this 	is 	set 	to 	[A UTO].	Please 	change 	the 	setting 	if 	the 	color 	of 	the 	
image	remains	unnatural.
AUTO ���������������������Automatically distinguishes RGB and component signals�
RGB �����������������������Switches to the RGB input�
COMPONENT ���������Switches to the component signal input�
[VIDEO	LEVEL]
Selection	of	the 	video 	signal 	le vel 	when 	connecting 	an 	e xternal 	de vice 	to 	the 	HDMI 	IN 	ter minal,...

84
[3D SETTINGS]
Please	refer	to	“3-9	 Projecting 	 3D 	 videos”	 (→	page	38)	for	the	operation.
FORMAT
Select	the	3D 	video 	f ormat 	(recording 	/ 	tr ansmission 	f ormat).	Select 	to 	match 	the 	3D 	broadcast 	and 	3D 	media.	Nor-
mally,	[AUTO]	is 	selected.	Please 	select 	the 	3D 	input 	signal 	f ormat 	when 	the 	3D 	detection 	signal 	of 	the 	f ormat 	cannot 	
be	distinguished.
L/R	INVERT
Invert	the	display	order	of	the	left	and	right	videos.
Select	[ON]	if	you	feel	uncomfortable	with	the	3D...

85
❻ Menu Descriptions & Functions [DISPLAY]
[PIP/PICTURE BY PICTURE]
SUB	INPUT
Select	the	input	signal	to	be	displayed	in	the	sub-display.
Please	refer	to	“4-2	 Displaying 	T wo 	 Pictures 	 at 	 the 	 Same 	Time”	 (→	page	52)	for	details	on	the	operation.
MODE
Select	either	PIP	or	PICTURE	BY	PICTURE	when	switching	to	2-screen	display.
PICTURE	SWAP
The	videos	in	the	main	display	and	sub-display	will	be	switched.
Please	refer	to	“4-2	 Displaying 	T wo 	 Pictures 	 at 	 the 	 Same 	Time”	 (→	page	54)	for...

86
TIP:
The	horizontal	position 	and 	vertical 	position 	are 	the 	amount 	of 	movement 	from 	the 	reference 	points. 	For 	example, 	when 	TOP-LEFT 	
is adjusted, the position is displayed with the same amount of movement \
even if displayed with other starting positions.
The maximum amount of movement is half the resolution of the projector.
Reference	point
Adjust
	
using
	
the
	
horizon-
tal
	
position
Sub-display Main
	
display
Reference
	
point
Adjust
	
using
	
the
	
vertical
	
position
TOP-LEFT...

87
[GEOMETRIC CORRECTION]
KEYSTONE
Display	the	trapezoid	correction	screen	and	adjust	the	trapezoidal	distortion	of	the	projection	screen.
To	display	the 	[KEYST ONE] 	screen, 	select 	→	[DISPLAY]	→	[GEOMETRIC 	CORRECTION] 	→	[KEYSTONE]	in 	the 	
on-screen	menu.	The 	[GEOMETRIC 	CORRECTION] 	screen 	can 	also 	be 	displa yed 	b y 	pressing 	the 	3D 	REFORM 	
button	on	the	remote	control.
HORIZONTAL ���������Adjustments when projecting from a diagonal direction to the 
screen�
VERTICAL...