NEC Projector PX602UL-WH User Manual

38
❾ Projecting 3D videos
This	projector	supports	DLP-Link	glasses	and	3D	emitter.
 CAUTION
Health precautions
Before	use,	please 	mak e 	sure 	to 	read 	an y 	health 	precautions 	that 	ma y 	be 	stated 	in 	the 	oper ating 	man uals 	enclosed 	
with	the	3D	eyewear	and	3D	video	software	(Blu-ray	player,	games,	computer	animation	files,	etc.).
Please	take	note	of	the	following	in	order	to	avoid	adverse	health	effects.
•	 Please	do	not	use	the	3D	eyewear	for	purposes	other	than	to	watch	3D	videos.
•...

39
	 The	[3D	SETTINGS]	screen	will	be	displayed.
(4)	Use	the	▼	button	to	align	the	cursor	with	[FORMAT],	then	press	ENTER.
	 The	[FORMAT]	screen	will	be	displayed.
(5)	Use	the	▼/▲	buttons	to	align	the	cursor	at	one	among	format	options,	then	press	ENTER	for	setting	it	up.
	 The	display	will	return	to	the	[FORMAT]	screen.
	 Press	the	MENU	button	to	return	to	the	original	screen.
•	 The	3D	caution 	message 	screen 	will 	be 	displa yed 	when 	s witching 	to 	a 	3D 	video 	(def ault 	f actory 	setting 	when...

40
Using a 3D emitter
This	projector	can 	be 	used 	to 	w atch 	videos 	in 	3D 	using 	commercially-a vailable 	activ e 	shutter-type 	3D 	e yewear.	In 	
order	to	synchroniz e 	the 	3D 	video 	and 	e yewear, 	a 	commercially-a vailable 	3D 	emitter 	needs 	to 	be 	connected 	to 	the 	
projector	(on	the	projector	side).
The	3D	eyewear	receives	information	from	the	3D	emitter	and	performs	opening	and	closing	on	the	left	and	right.	
3D	eyewear	and	3D	emitter	preparations
Please	use	an	active	shutter-type	3D...

41
When videos cannot be viewed in 3D
Please	check	the	following	points	when	videos	cannot	be	viewed	in	3D.
Please	also	read	the	operating	manual	attached	to	the	3D	eyewear.
Possible	reasonsSolutions
The selected signal does not support 3D output�Please change the video signal input to one that supports 3D�
The format for the selected signal is turned to [OFF(2D)]�Please change the format in the on-screen menu to [AUTO] or a format that supports 3D�
A eyewear that is not supported by the projector is...

42
❿ Controlling the Projector by Using an HTTP Browser
Overview
The	HTTP	Server	function	provides	settings	and	operations	for:
1.	 Setting	for	wired	network	(NETWORK	SETTINGS)
	 To	use	wired 	LAN 	connection, 	connect 	the 	projector 	to 	the 	computer 	with 	a 	commercially 	a vailable 	LAN 	cab le.	(→	
page	133)
2. Setting Alert Mail (ALERT MAIL)
	 When	the	projector	is	connected	to	a	wired	network,	error	messages	will	be	sent	via	e-mail.
3. Operating the pr ojector
	 Power	on/off,	selecting	input,...

43
Handling of the Address for Operation via a Browser
Regarding	the	actual 	address 	that 	is 	entered 	f or 	the 	address 	or 	entered 	to 	the 	URL 	column 	when 	oper ation 	of 	the 	pro-
jector	is	via 	a 	bro wser, 	the 	host 	name 	can 	be 	used 	as 	it 	is 	when 	the 	host 	name 	corresponding 	to 	the 	IP 	address 	of 	the 	
projector	has	been 	registered 	to 	the 	domain 	name 	ser ver 	b y 	a 	netw ork 	administr ator, 	or 	the 	host 	name 	corresponding 	
to	the	IP	address	of	the	projector	has...

44
PICTURE:	Controls 	 the 	 video 	 adjustment 	 of 	 the 	 projector.
BRIGHTNESS ▲ ����Increases the brightness adjustment value�
BRIGHTNESS ▼ ����Decreases the brightness adjustment value�
CONTRAST ▲ ��������Increases the contrast adjustment value�
CONTRAST ▼ ��������Decreases the contrast adjustment value�
COLOR ▲ ��������������Increases the color adjustment value�
COLOR ▼ ��������������Decreases the color adjustment value�
HUE ▲ �������������������Increases the hue adjustment value�
HUE ▼...

45
NETWORK SETTINGS
•	SETTINGS
WIRED
SETTINGSet	for	wired	LAN.
APPLYApply	your	settings	to	wired	LAN.
PROFILE	1/PROFILE	2Two	settings	can	be	set	for	wired	LAN	connection.	Select 	 PROFILE 	 1 	 or 	 PROFILE 	 2.	
DISABLETurn	off	wired	LAN	connection
DHCP	ONAutomatically	assign	IP 	address , 	subnet 	mask, 	and 	gate way 	to 	the 	projector 	from 	y our 	
DHCP	server.
DHCP	OFFSet	IP	address , 	subnet 	mask, 	and 	gate way 	to 	the 	projector 	assigned 	b y 	y our 	netw ork 	
administrator.
IP	ADDRESSSet...

46
•	NAME
PROJECTOR	NAMEEnter	a	name 	f or 	y our 	projector 	so 	that 	y our 	computer 	can 	identify 	the 	projector .	A 	
projector	name	must	be	16	characters	or	less.	
TIP:	Projector 	 name 	 will 	 not 	 be 	 affected 	 even 	 when 	 [RESET] 	 is 	 done 	 from 	 the 	 menu.
HOST	NAMEEnter	the	hostname 	of 	the 	netw ork 	connected 	to 	the 	projector .	A 	host 	name 	m ust 	be 	
15	or	less.
DOMAIN	NAMEEnter	the	domain 	name 	of 	the 	netw ork 	connected 	to 	the 	projector .	A 	domain 	name 	
must...

47
•	NETWORK	SERVICE
PJLink	PASSWORDSet	a	password 	f or 	PJLink*.	A 	pass word 	m ust 	be 	32 	char acters 	or 	less .	Do 	not 	f orget 	
your	password.	However, 	 if 	 you 	 forget 	 your 	 password, 	 consult 	 with 	 your 	 dealer.
HTTP	PASSWORDSet	a	password	for	HTTP	server.	A 	 password 	 must 	 be 	 10 	 characters 	 or 	 less.
When	a	pass word 	is 	set 	up , 	y ou 	will 	be 	prompted 	f or 	y our 	user 	name 	(arbitr ary) 	and 	
password	during	LOGON.
AMX	BEACONTurn	on	or 	off 	f or 	detection...