NEC Projector PH1400U User Manual

47
3. Convenient Features
7.	 Type	in	the	same	combination	of	▲▼◀▶	buttons	and	press	the	ENTER	button.
	 The	confirmation	screen	will	be	displayed.
8.	 Select	[YES]	and	press	the	ENTER	button.
	 The	SECURITY	function	has	been	enabled.
To turn on the projector when [SECURITY] is enabled:
1.	 Press	the	POWER	button.
	 The	projector	will	be	turned	on	and	display	a	message	to	the	effect	that	the	projector	is	locked.
2.	 Press	the	MENU	button.
3.	 Type	in	the	correct	keyword	and	press	the	ENTER	button.	The...

48
3. Convenient Features
To disable the SECURITY function:
1.	 Press	the	MENU	button.
	 The	menu	will	be	displayed.
2.		Select	[SETUP]	→	[INSTALLATION(2)]	→	[SECURITY]	and	press	the	ENTER	button.
	 The	OFF/ON	menu	will	be	displayed.
3.	 Select	[OFF]	and	press	the	ENTER	button.
	 The	SECURITY	KEYWORD	screen	will	be	displayed.
4.	 Type	in	your	keyword	and	press	the	ENTER	button.
	 When	the	correct	keyword	is	entered,	the	SECURITY	function	will	be	disabled.
NOTE:	 If	you	 forget	 your	keyword,	 contact...

49
3. Convenient Features
❿ Storing Changes for Lens Shift, Zoom, and Focus [LENS 
MEMORY]
The	 adjusted	 values	can	be	stored	 in	projector	 memory	when	using	the	LENS	 SHIFT,	 ZOOM	and	FOCUS	 buttons	
of	the	 projector. 	Adjusted	 values	can	be	applied	 to	the	 signal	 you	selected. 	This	 will	eliminate	 the	need	 to	adjust	 lens	
shift,	focus,	 and	zoom	 at	the	 time	 of	source	 selection. 	There	 are	two	 ways	 to	save	 adjusted	 values	for	lens	 shift,	 zoom,	
and	focus.
Function	nameDescription...

50
3. Convenient Features
4. Press the ▼	button	to	select	[REF. 	LENS	MEMORY]	and	press	the	ENTER	button.
	 The	[REF.	LENS	MEMORY]	screen	will	be	displayed.
5.	 Select	[STORE]	and	press	the	ENTER	button.
	 The	confirmation	screen	will	be	displayed.
6. Press the ◀	button	to	select	and	[YES]	and	press	the	ENTER	button.
	 The	adjusted	values	for	lens	shift,	zoom,	and	focus	have	been	stored	in	[REF. 	LENS	MEMORY].
7.	 Press	the	MENU	button.
	 The	menu	will	be	closed.
TIP:
•	 To	store	adjusted	values	for	each...

51
3. Convenient Features
	 The	menu	will	be	displayed.	
2. Press the ▶	button	to	select	[SETUP]	and	press	the	ENTER	button.
3.  Press the ▶	button	to	select	[INSTALLATION	(1)].
4.  Press the ▼	button	to	select	[REF. 	LENS	MEMORY]	and	press	the	ENTER	button.
	 The	[REF.	LENS	MEMORY]	screen	will	be	displayed.
5.	 Select	[MOVE]	and	press	the	ENTER	button.
	 The	confirmation	screen	will	be	displayed.
6. Press the ◀	button	to	select	and	[YES]	and	press	the	ENTER	button.
	 The	adjusted	values	will	be	applied...

52
3. Convenient Features
TIP:
To	call	up	the	adjusted	values	from	[LENS	MEMORY]:
1.	 From	the	menu,	select	[ADJUST]	→	[LENS	MEMORY]	→	[MOVE]	and	press	the	ENTER	button.
	 The	confirmation	screen	will	be	displayed.
2. Press the ◀	button	to	select	and	[YES]	and	press	the	ENTER	button.
	 The	adjusted	values	stored	in	[LENS	MEMORY]	will	be	applied	to	the	current	signal. 	
To	automatically	apply	the	adjusted	values	at	the	time	of	source	selection:
1.	 From	the	menu, 	select	 [SETUP]	→	[REF. 	LENS	 MEMORY]	→...

53
3. Convenient Features
⓫ Displaying a Picture Using [EDGE BLENDING]
The	EDGE	BLENDING	function	allows	a	multi-screen	image	with	high	resolution	to	be	displayed	on	a	large	screen.
This	function	adjusts	overlapping	edges	of	images	projected	from	each	projector	to	uniform	multi-screen	images.
NOTE:
•	 For	projector	throw	distances,	refer	to	“Throw	distance	and	screen	size”	on	page	219, 220, 221.
•	 Before	performing	 the	Edge	 Blending	 function,	 place	the	projector	 in	the	 correct	 position	 so	that...

54
3. Convenient Features
2	 Select	[MODE]	→	[ON]	and	press	the	ENTER	button.
	 This	enables	the	Edge	Blending	function.	The	following	menu	items	are	available:
	 [TOP],	[BOTTOM],	[LEFT],	[RIGHT],	and	[BLACK	LEVEL]
3	 Select	[RIGHT]	for	Projector	A	and	[LEFT]	for	Projector	B.
	 Press	the	ENTER	button.
	 The	following	items	are	available:
	 [CONTROL],	[MARKER],	[RANGE],	and	[POSITION]
4	 Select	[CONTROL]	→	[ON]	and	press	the	ENTER	button.
	 Each	 [TOP],	[BOTTOM],	 [LEFT],	[RIGHT],	 and	[BLACK	 LEVEL]	has...

55
3. Convenient Features
② Adjust [RANGE] and [POSITION] to determine an area of overlapped edges of images 
projected from each projector.
[RANGE]
(Determine an area of overlapped edges of 
images.)[POSITION]
(Determine the position of overlapped edges of images.)
Green	marker
Turn	on	[RIGHT]
Magenta	marker Turn on [LEFT]
Magenta	marker
Turning	on	[MARKER]	will	display	markers	in	magenta	and	green.
The	magenta	marker	is	used	for	[RANGE]	and	green	one	for	[POSITION].
1	 Adjust	[RANGE].
  Use the ◀ or ▶...

56
3. Convenient Features
TIP:
•	 When	displaying	a	signal	with	a	different	resolution,	perform	the	Edge	Blending	function	from	the	start.	
•	 Setting	of	[MARKER]	will	not	be	saved	and	return	to	[OFF]	when	the	projector	is	turned	off.	
•	 To	display	or	hide	the	marker	while	the	projector	is	running,	turn	on	or	off	[MARKER]	from	the	menu.
•	 If	you	want	 to	make	 differences	 in	white	 balance	 and	brightness	 between	projectors	 less	visible,	 adjust	[REF.	WHITE	 BALANCE]	
and	[MULTI-SCREEN	COMP.]	to...