NEC Projector Ph1000u User Manual

197
8. User Supportware
•	Downloading	disclosed	file
1	 Click	[File	Transfer]	in	the	attendant	window.
	 The	“File	Transfer” 	window	will	be	opened.
1Click
2	 Select	a	file	to	download, 	and	click	[Download].
	 Downloading	will	begin.
	 The	progress	of	the	downloading	is	displayed	at	the	lower	left	of	the	window.
3	 When	downloading	is	complete, 	click	[File]	in	the	“File	Transfer” 	window,	and	click	[Exit].
	 The	“File	Transfer” 	window	will	be	closed.
REFERENCE:
•	 If	“Open	 After	Downloading”	 is...

198
8. User Supportware
•	Changing	presenter
Three	types	of	settings	 may	be	made	 to	change	 the	presenter: 	“Not	 Approved”,	 “Approved”,	 and	“Changing	 Prohibited”	
(these	can	be	selected	only	by	the	presenter).
In	the	following	example,	 “Not	Approved”	is	selected.
•	 Click	[Become	A	Presenter]	in	the	attendant	window.
	 You	will	change	from	a	participant	to	a	presenter.
1Click
•	Leaving	conference
Leave	the	conference	and	exit	Image	Express	Utility	2.0.
•	 Click	[File]	in	the	attendant	window, 	and...

199
8. User Supportware
 Controlling the Projector over a LAN (PC Control Utility Pro 4)
Using	the	utility	software	“PC	Control	Utility	Pro	4”,	the	projector	can	be	controlled	from	a	computer	over	a	LAN.
Control Functions
Power	On/Off,	signal	selection,	picture	freeze,	picture	mute,	adjusting,	error	message	notification,	event	schedule.
Screen	of	PC	Control	Utility	Pro	4
This	section	 provides	 an	outline	 of	preparation	 for	use	 of	PC	 Control	 Utility	Pro	4.	For	 information	 on	how	 to	use	 PC...

200
8. User Supportware
 Projecting Your Mac’s Screen Image from the Projector over 
a LAN (Image Express Utility 2 for Mac)
Using	Image	 Express	 Utility	2	for	 Mac	 contained	 allows	you	to	send	 the	Mac’s	 screen	 image	to	the	 projector	 over	a	
network	(wired	or	wireless	LAN).
Image	Express	Utility	2	for	Mac	runs	on	Mac	OS	X	10.2.8	or	later.
It	runs	on	both	Mac	OS	X	(PowerPC)	and	Mac	OS	X	(Intel).
Hereafter,	 “Image	Express	Utility	2	for	Mac” 	is	abbreviated	as	“Image	Express	Utility	2”.
What you...

201
8. User Supportware
Using Image Express Utility 2
Connecting to a projector
1	 Confirm	that	the	projector	has	been	turned	on.
2	 Click	the	AirPort	status	(		)	on	the	Macintosh	menu	bar,	and	click	“Turn	AirPort	On”.
	 The	AirPort	status	is	changed	to	 “		”	or	 “		”.
•	 AirPort	status	types	and	meanings
 ...AirPort	: 	Off
 ...AirPort	:	On	(	in	infrastructure	connection	)
 ...AirPort	:	On	(	in	adhoc	connection	)
REFERENCE:
When the AirPort status ( 	/		/		)	is	not	displayed	on	the	menu	bar:
1	 Click...

202
8. User Supportware
3	 Double-click	the	“Image	Express	Utility	2” 	icon	in	the	“Image	Express	Utility	2” 	folder.
•	 At	the	initial	start,	the	“License	Agreement”	window	is	displayed. 	
	 Thoroughly	read	the	agreement	 shown	on	the	 screen,	 and	click	 “I	accept	 the	terms	 in	the	 license	 agreement” 	
and	the	[OK]	button.
	 Next,	the	 “Authenticate” 	window	will	be	displayed.
4	 Enter	the	administrator	name	and	password	of	your	Macintosh	computer, 	and	click	the	[OK]	button.
	 The	[Projector...

203
8. User Supportware
Stopping/Restarting	Image	Transmission
•	Stopping	image	transmission
1	 Click	[Tools]	on	the	menu	bar, 	and	click	[Stop	Sending].
	 Image	transmission	is	temporarily	stopped.
•	Restarting	image	transmission
1	 Click	[Tools]	on	the	menu	bar,	and	click	[Start	Sending].
	 Image	transmission	is	started	again.
Exiting	Image	Express	Utility	2
1	 Click	[Image	Express	Utility	2]	on	the	menu	bar, 	and	click	[Quit	Image	Express	Utility	2].
	 Image	Express	Utility	2	is	exited. 

204
8. User Supportware
 Operating the Projector Via the LAN (Virtual Remote Tool)
Using	the	software	 program	“Virtual	Remote	 Tool”	that	 you	can	 download	 from	our	web	 site,	Virtual	 Remote	 screen	
(or	toolbar)	can	be	displayed	on	your	computer	screen.
This	will	help	 you	perform	 operations	 such	as	projector’s	 power	on	or	off	 and	 signal	 selection	 via	a	LAN	 connection. 	It	
is	 also	 used	 to	send	 an	image	 to	the	 projector	 and	register	 it	as	 the	 logo	 data	 of	the	 projector. 	After...

205
8. User Supportware
Start Virtual Remote Tool
Start using the shortcut icon
•	 Double-click	the	shortcut	icon		on	the	Windows	Desktop.
Start from the Start menu
•	 Click	 [Start]	→	[All	 Programs]	 or	[Programs]	→	[NEC	 Projector	 User	Supportware]	→	[Virtual	 Remote	 Tool]	
→	[Virtual	Remote	 Tool].
	 When	Virtual	Remote	 Tool	starts	for	the	first	time,	 “Easy	Setup”	window	will	be	displayed.
 The	“Easy	Setup” 	feature	is	not	available	on	this	model. 	Click	“Close	Easy	Setup”.
	 Closing	the	 “Easy...

206
8. User Supportware
Exiting	Virtual	Remote	 Tool
1	 Click	the	Virtual	Remote	 Tool	icon		on	the	Taskbar.
	 The	pop-up	menu	will	be	displayed.
2	 Click	 “Exit”.
	 The	Virtual	Remote	 Tool	will	be	closed.
Viewing	the	help	file	of	 Virtual	Remote	Tool
•	Displaying	the	help	file	using	the	taskbar
1	 Click	the	Virtual	Remote	 Tool	icon		on	the	taskbar	when	 Virtual	Remote	Tool	is	running.
	 The	pop-up	menu	will	be	displayed.
2.	 Click	“Help”.
	 The	Help	screen	will	be	displayed.
•	Displaying	the	help	file...