NEC Projector Ph1000u User Manual

187
8. User Supportware
Installation for Macintosh software
Image	Express	Utility	2	for	Mac	supports	Mac	OS	X.
1.	 Connect	your	Macintosh	 computer	to	the	 internet	 and	visit	 our	website	 (http://www.nec-display.com/dl/en/
index.html).
2.	 Download	 “Image	Express	 Utility	2	for	 Mac	 OS(Intel)” 	or	 “Image	 Express	 Utility	2	for	 Mac	 OS(PowerPC)” 	
from	“Download” 	and	save	an	 “.exe”	file	to	your	computer. 	
 File name is different depending on the version of the software program.
3.	 Move	the...

188
8. User Supportware
 Projecting Images or Videos from the Projector over a LAN 
(Image Express Utility 2.0)
What you can do with Image Express Utility 2.0
•	 Using	Image	Express	 Utility	2.0	allows	 you	to	send	 the	screens	 of	your	 computers	 to	the	 projector	 via	wired/wire-
less	LAN.
	 The	 projected	 images	can	be	sent	 from	 a	computer	 to	not	 only	 one	projector	 but	also	 to	two	 or	more	 projectors	 at	
the	same	time.
	 When	“Meeting	Mode” 	is	used,	projected	images	can	be	sent	and...

189
8. User Supportware
•	 Projected	images	can	be	transferred	and	saved	to	computers.
	 When	“Meeting	Mode”	is	 used,	 projected	 images	can	be	sent	 to	the	 computers	 of	all	 the	 participants	 (attendants)	
of	a	“Meeting”. 	The	received	images	can	be	saved	to	your	computer	with	a	memo	(text	data)	attached.
Presenter
Attendant
Attendant Attendant
•	 1-click	switching	of	presenter
	 When	switching	to	another	 presenter	 during	the	conference,	 the	participants	 (attendants)	 can	simply	 click	a	button...

190
8. User Supportware
Basic Operation of Image Express Utility 2.0
This	section	explains	the	following	three	cases	as	examples	of	operating	Image	Express	Utility	2.0.
(1)	 Transferring	images	to	the	projector
(2)	 Holding	a	conference
(3)	 Participating	in	a	conference
Sending Images to Projector
•	Connecting	projector
1	 Turn	on	the	power	to	the	projector	for	which	LAN	has	been	set.
2	 Click	Windows	 [Start]	→	[All	 Programs]	→	[NEC	 Projector	 User	Supportware]	→	[Image	 Express	 Utility	2.0]	
→...

191
8. User Supportware
4	 Check()	the	projector	to	connect	and	click	[Connect].
	 If	the	name	of	the	projector	to	connect	is	not	on	the	list	or	if	it	is	hidden,	click	[Update].
4-1
4-2
ClickClick
	 The	screen	of	your	computer	will	be	projected	from	the	projector.
	 At	this	time,	the	input	signal	of	the	projector	will	automatically	change	to	“NETWORK”.
NOTE:
•	 When	the	projector	is	found,	“1280	×	800”	will	be	displayed	in	the	resolution	field.
•	Transferring	images
When	 your	computer	 is	connected	 to...

192
8. User Supportware
•	Stopping	or	resuming	the	transmission	of	images
The	transmission	of	the	screen	of	the	computer	to	the	projector	can	be	temporarily	stopped	and	then	resumed.
1	 Click	the	projector	icon	()	on	the	Windows	taskbar.
	 A	pop-up	menu	will	be	displayed.
2	 Click	[Stop	Sending].
	 The	projector	icon	on	the	taskbar	will	change	( → ).
NOTE:
Even	if	the	screen	of	the	computer	is	changed	in	this	status,	the	image	projected	from	the	projector	does	not	change.
To	manipulate	the	screen	that...

193
8. User Supportware
Holding Conferences
•	Holding	conferences
1	 Follow	steps	1	through	4	in	“Connecting	projector”	of	“Sending	Images	to	Projector” 	(→	page	190).
	 The	screen	of	your	computer	will	be	projected	from	the	projector.
•	Disclose	a	file	to	the	participants	of	the	conference.
NOTE:
To	disclose	a	file	to	the	participants,	selection	can	be	made	only	in	folder	units.
Therefore,	a	folder	only	having	files	that	can	be	disclosed	to	the	participants	must	be	created	in	advance.
1	 Click	the...

194
8. User Supportware
5	 Select	a	folder	saving	the	file	to	be	disclosed	to	the	participants,	and	click	[OK].
	 The	file	in	the	selected	folder	will	be	displayed	in	the	list	of	files	to	transfer.
6	 Click	[Download].
	 The	file	will	be	shown	to	the	participants.
NOTE:
When	the	computer	 is	connected	 to	the	 projector,	 the	computer	 screen	that	is	in	 of	 being	 progress	 is	also	 projected	 from	the	projec-
tor.	To	manipulate	a	screen	that	should	not	be	shown	(not	projected),	temporarily	stop	the...

195
8. User Supportware
3	 Click	the	Meeting	Name	to	participate,	and	click	[Connect].
3Click
	 The	computer	will	be	connected	to	the	selected	conference	and	the	attendant	window	will	be	displayed.
	 If	the	presenter	 selects	“Send	to	PC	 And	 Projector”,	 the	image	 projected	 from	the	projector	 is	displayed	 in	the	 at-
tendant window. 

196
8. User Supportware
•	Saving	received	images
1	 Click	[Memo]	in	the	attendant	window.
	 A	memo	pane	will	be	displayed.
2
1
ClickMemo paneClick
2	 Click	[Save	Image]	in	the	attendant	window.
	 The	image	displayed	in	the	attendant	window	will	be	saved.
•	 The	saved	image	is	added	to	the	memo	list	and	a	thumbnail	is	displayed.
•	 A	memo	can	be	attached	to	the	saved	image.
REFERENCE:
•	 In	case	 of	Windows	 XP,	a	created	 file	is	saved	 to	“My	 Documents\ImageExpress\”	 under	the	default	 settings.	 In...