NEC Projector PA521U User Manual
Here you can view all the pages of manual NEC Projector PA521U User Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 121
![Page 121
109
5. Using On-Screen Menu
NOTE:
• When [HIGH ALTITUDE] is selected for [FAN MODE], a symbol icon will be displayed at the bottom of the menu.
• It is recommended that you select High speed mode if you use the projector non-stop for consecutive days.
• Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 5500 feet/1600 meters or higher.
• Using the projector at altitudes approximately 5500 feet/1600 meters or higher without setting to [HIGH ALTITUDE] can...](http://img.usermanuals.tech/thumb/54/99626/w300_projector_manual_8417_d-120.png "Page 121
109
5. Using On-Screen Menu
NOTE:
• When [HIGH ALTITUDE] is selected for [FAN MODE], a symbol icon will be displayed at the bottom of the menu.
• It is recommended that you select High speed mode if you use the projector non-stop for consecutive days.
• Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 5500 feet/1600 meters or higher.
• Using the projector at altitudes approximately 5500 feet/1600 meters or higher without setting to [HIGH ALTITUDE] can...")
109 5. Using On-Screen Menu NOTE: • When [HIGH ALTITUDE] is selected for [FAN MODE], a symbol icon will be displayed at the bottom of the menu. • It is recommended that you select High speed mode if you use the projector non-stop for consecutive days. • Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 5500 feet/1600 meters or higher. • Using the projector at altitudes approximately 5500 feet/1600 meters or higher without setting to [HIGH ALTITUDE] can...
Page 122
![Page 122
110
5. Using On-Screen Menu
[OPTIONS(2)]
Selecting Power-saving in [STANDBY MODE]
The projector has three standby modes: [NORMAL], [POWER-SAVING] and [NETWORK STANDBY].
The POWER-SAVING mode is the mode that allows you to put the projector in the power-saving condition which
consumes less power than the NORMAL mode. The projector is preset for NORMAL mode at the factory.
NORMAL �����������������������������Power indicator: Orange light/STATUS indicator: Green light
POWER-SAVING...](http://img.usermanuals.tech/thumb/54/99626/w300_projector_manual_8417_d-121.png "Page 122
110
5. Using On-Screen Menu
[OPTIONS(2)]
Selecting Power-saving in [STANDBY MODE]
The projector has three standby modes: [NORMAL], [POWER-SAVING] and [NETWORK STANDBY].
The POWER-SAVING mode is the mode that allows you to put the projector in the power-saving condition which
consumes less power than the NORMAL mode. The projector is preset for NORMAL mode at the factory.
NORMAL �����������������������������Power indicator: Orange light/STATUS indicator: Green light
POWER-SAVING...")
110 5. Using On-Screen Menu [OPTIONS(2)] Selecting Power-saving in [STANDBY MODE] The projector has three standby modes: [NORMAL], [POWER-SAVING] and [NETWORK STANDBY]. The POWER-SAVING mode is the mode that allows you to put the projector in the power-saving condition which consumes less power than the NORMAL mode. The projector is preset for NORMAL mode at the factory. NORMAL �����������������������������Power indicator: Orange light/STATUS indicator: Green light POWER-SAVING...
Page 123
![Page 123
111
5. Using On-Screen Menu
Turning On the Projector By Applying Computer Signal [AUTO POWER ON(COMP1/3)]
When the projector is in Standby mode, applying a computer signal from a computer connected to the COMPUTER1
IN or COMPUTER3 IN input will power on the projector and simultaneously project the computer’s image.
This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinet
to power on the projector.
To use this function, first...](http://img.usermanuals.tech/thumb/54/99626/w300_projector_manual_8417_d-122.png "Page 123
111
5. Using On-Screen Menu
Turning On the Projector By Applying Computer Signal [AUTO POWER ON(COMP1/3)]
When the projector is in Standby mode, applying a computer signal from a computer connected to the COMPUTER1
IN or COMPUTER3 IN input will power on the projector and simultaneously project the computer’s image.
This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinet
to power on the projector.
To use this function, first...")
111 5. Using On-Screen Menu Turning On the Projector By Applying Computer Signal [AUTO POWER ON(COMP1/3)] When the projector is in Standby mode, applying a computer signal from a computer connected to the COMPUTER1 IN or COMPUTER3 IN input will power on the projector and simultaneously project the computer’s image. This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinet to power on the projector. To use this function, first...
Page 124
![Page 124
112
5. Using On-Screen Menu
Menu Descriptions & Functions [INFO.]
Displays the status of the current signal and lamp usage. This item has nine pages. The information included is as
follows:
TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.
[USAGE TIME]
[LAMP LIFE REMAINING] (%)*
[LAMP HOURS USED] (H)
[FILTER HOURS USED] (H)
[TOTAL CARBON SAVINGS] (kg-CO2)
* The progress indicator shows the percentage of remaining bulb life.
The value informs you of the...](http://img.usermanuals.tech/thumb/54/99626/w300_projector_manual_8417_d-123.png "Page 124
112
5. Using On-Screen Menu
Menu Descriptions & Functions [INFO.]
Displays the status of the current signal and lamp usage. This item has nine pages. The information included is as
follows:
TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.
[USAGE TIME]
[LAMP LIFE REMAINING] (%)*
[LAMP HOURS USED] (H)
[FILTER HOURS USED] (H)
[TOTAL CARBON SAVINGS] (kg-CO2)
* The progress indicator shows the percentage of remaining bulb life.
The value informs you of the...")
112 5. Using On-Screen Menu Menu Descriptions & Functions [INFO.] Displays the status of the current signal and lamp usage. This item has nine pages. The information included is as follows: TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items. [USAGE TIME] [LAMP LIFE REMAINING] (%)* [LAMP HOURS USED] (H) [FILTER HOURS USED] (H) [TOTAL CARBON SAVINGS] (kg-CO2) * The progress indicator shows the percentage of remaining bulb life. The value informs you of the...
Page 125
![Page 125
113
5. Using On-Screen Menu
[SOURCE(1)]
INPUT TERMINAL RESOLUTION
HORIZONTAL FREQUENCY VERTICAL FREQUENCY
SYNC TYPE SYNC POLARITY
SCAN TYPE SOURCE NAME
ENTRY NO.
[SOURCE(2)]
SIGNAL TYPE VIDEO TYPE
BIT DEPTH VIDEO LEVEL
LINK RATE LINK LANE
[WIRED LAN]
IP ADDRESS SUBNET MASK
GATEWAY MAC ADDRESS](http://img.usermanuals.tech/thumb/54/99626/w300_projector_manual_8417_d-124.png "Page 125
113
5. Using On-Screen Menu
[SOURCE(1)]
INPUT TERMINAL RESOLUTION
HORIZONTAL FREQUENCY VERTICAL FREQUENCY
SYNC TYPE SYNC POLARITY
SCAN TYPE SOURCE NAME
ENTRY NO.
[SOURCE(2)]
SIGNAL TYPE VIDEO TYPE
BIT DEPTH VIDEO LEVEL
LINK RATE LINK LANE
[WIRED LAN]
IP ADDRESS SUBNET MASK
GATEWAY MAC ADDRESS")
113 5. Using On-Screen Menu [SOURCE(1)] INPUT TERMINAL RESOLUTION HORIZONTAL FREQUENCY VERTICAL FREQUENCY SYNC TYPE SYNC POLARITY SCAN TYPE SOURCE NAME ENTRY NO. [SOURCE(2)] SIGNAL TYPE VIDEO TYPE BIT DEPTH VIDEO LEVEL LINK RATE LINK LANE [WIRED LAN] IP ADDRESS SUBNET MASK GATEWAY MAC ADDRESS
Page 126
![Page 126
114
5. Using On-Screen Menu
[WIRELESS LAN(1)]
IP ADDRESS SUBNET MASK
GATEWAY MAC ADDRESS
[WIRELESS LAN(2)]
SSID NETWORK TYPE
WEP/WPA CHANNEL
SIGNAL LEVEL
[VERSION(1)]
FIRMWARE DATA
FIRMWARE2 SUB-CPU](http://img.usermanuals.tech/thumb/54/99626/w300_projector_manual_8417_d-125.png "Page 126
114
5. Using On-Screen Menu
[WIRELESS LAN(1)]
IP ADDRESS SUBNET MASK
GATEWAY MAC ADDRESS
[WIRELESS LAN(2)]
SSID NETWORK TYPE
WEP/WPA CHANNEL
SIGNAL LEVEL
[VERSION(1)]
FIRMWARE DATA
FIRMWARE2 SUB-CPU")
114 5. Using On-Screen Menu [WIRELESS LAN(1)] IP ADDRESS SUBNET MASK GATEWAY MAC ADDRESS [WIRELESS LAN(2)] SSID NETWORK TYPE WEP/WPA CHANNEL SIGNAL LEVEL [VERSION(1)] FIRMWARE DATA FIRMWARE2 SUB-CPU
Page 127
![Page 127
115
5. Using On-Screen Menu
[VERSION(2)]
FIRMWARE3
[OTHERS]
PROJECTOR NAME MODEL NO.
SERIAL NUMBER LAN UNIT TYPE
CONTROL ID (when [CONTROL ID] is set)](http://img.usermanuals.tech/thumb/54/99626/w300_projector_manual_8417_d-126.png "Page 127
115
5. Using On-Screen Menu
[VERSION(2)]
FIRMWARE3
[OTHERS]
PROJECTOR NAME MODEL NO.
SERIAL NUMBER LAN UNIT TYPE
CONTROL ID (when [CONTROL ID] is set)")
115 5. Using On-Screen Menu [VERSION(2)] FIRMWARE3 [OTHERS] PROJECTOR NAME MODEL NO. SERIAL NUMBER LAN UNIT TYPE CONTROL ID (when [CONTROL ID] is set)
Page 128
![Page 128
116
5. Using On-Screen Menu
Menu Descriptions & Functions [RESET]
Returning to Factory Default [RESET]
The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except
the following:
[CURRENT SIGNAL]
Resets the adjustments for the current signal to the factory preset levels.
The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS],
[ASPECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and...](http://img.usermanuals.tech/thumb/54/99626/w300_projector_manual_8417_d-127.png "Page 128
116
5. Using On-Screen Menu
Menu Descriptions & Functions [RESET]
Returning to Factory Default [RESET]
The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except
the following:
[CURRENT SIGNAL]
Resets the adjustments for the current signal to the factory preset levels.
The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS],
[ASPECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and...")
116 5. Using On-Screen Menu Menu Descriptions & Functions [RESET] Returning to Factory Default [RESET] The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following: [CURRENT SIGNAL] Resets the adjustments for the current signal to the factory preset levels. The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS], [ASPECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and...
Page 129
![Page 129
117
5. Using On-Screen Menu
Clearing the Filter Usage Hours [CLEAR FILTER HOURS]
Resets the filter usage back to zero. Selecting this option displays submenu for a confirmation. Select [YES] and press
the ENTER button.
The [OFF] item is selected for [FILTER MESSAGE] at the time of shipment. When [OFF] is selected, you do not need
to clear the filter usage hour.
NOTE: Elapsed time of the filter use will not be affected even when [RESET] is done from the menu.](http://img.usermanuals.tech/thumb/54/99626/w300_projector_manual_8417_d-128.png "Page 129
117
5. Using On-Screen Menu
Clearing the Filter Usage Hours [CLEAR FILTER HOURS]
Resets the filter usage back to zero. Selecting this option displays submenu for a confirmation. Select [YES] and press
the ENTER button.
The [OFF] item is selected for [FILTER MESSAGE] at the time of shipment. When [OFF] is selected, you do not need
to clear the filter usage hour.
NOTE: Elapsed time of the filter use will not be affected even when [RESET] is done from the menu.")
117 5. Using On-Screen Menu Clearing the Filter Usage Hours [CLEAR FILTER HOURS] Resets the filter usage back to zero. Selecting this option displays submenu for a confirmation. Select [YES] and press the ENTER button. The [OFF] item is selected for [FILTER MESSAGE] at the time of shipment. When [OFF] is selected, you do not need to clear the filter usage hour. NOTE: Elapsed time of the filter use will not be affected even when [RESET] is done from the menu.
Page 130
![Page 130
118
5. Using On-Screen Menu
❾ Application Menu
When [NETWORK] is selected from the [SOURCE] menu, the application menu [APPLICATION MENU] will be dis-
played.
The application menu allows you to set up the User Supportware, Network Settings (NETWORK SETTINGS) and
Tools (TOOLS).
The User Supportware is contained on the supplied NEC Projector CD-ROM.
In [ADMINISTRATOR MODE], either [ADVANCED] menu or [BASIC] menu can be selected. (→ page 136)
The [BASIC] menu contains minimum essentials of...](http://img.usermanuals.tech/thumb/54/99626/w300_projector_manual_8417_d-129.png "Page 130
118
5. Using On-Screen Menu
❾ Application Menu
When [NETWORK] is selected from the [SOURCE] menu, the application menu [APPLICATION MENU] will be dis-
played.
The application menu allows you to set up the User Supportware, Network Settings (NETWORK SETTINGS) and
Tools (TOOLS).
The User Supportware is contained on the supplied NEC Projector CD-ROM.
In [ADMINISTRATOR MODE], either [ADVANCED] menu or [BASIC] menu can be selected. (→ page 136)
The [BASIC] menu contains minimum essentials of...")
118 5. Using On-Screen Menu ❾ Application Menu When [NETWORK] is selected from the [SOURCE] menu, the application menu [APPLICATION MENU] will be dis- played. The application menu allows you to set up the User Supportware, Network Settings (NETWORK SETTINGS) and Tools (TOOLS). The User Supportware is contained on the supplied NEC Projector CD-ROM. In [ADMINISTRATOR MODE], either [ADVANCED] menu or [BASIC] menu can be selected. (→ page 136) The [BASIC] menu contains minimum essentials of...