NEC Projector Pa500x User Manual

169
8. User Supportware
Exiting	Virtual	Remote	 Tool
1	 Click	the	Virtual	Remote	 Tool	icon		on	the	Taskbar.
 The pop-up menu will be displayed.
2	 Click	 “Exit”.
 The Virtual Remote Tool will be closed.
Viewing	the	help	file	of	 Virtual	Remote	Tool
•	Displaying	the	help	file	using	the	taskbar
1	 Click	the	Virtual	Remote	 Tool	icon		on	the	taskbar	when	 Virtual	Remote	Tool	is	running.
 The pop-up menu will be displayed.
2.	 Click	 “Help”.
 The Help screen will be displayed.
•	Displaying	the	help	file...

170
8. User Supportware
 Projecting Your Computer’s Screen Image from the Projector 
over a LAN (Image Express Utility Lite)
 
Using	Image	 Express	 Utility	Lite	allows	 you	to	send	 the	computer’s	 screen	image	to	the	 projector	 over	a	wired	 or	
wireless	LAN.
This	section	 will	show	 you	an	outline	 about	how	to	connect	 the	projector	 to	a	LAN	 and	to	use	 Image	 Express	 Utility	
Lite.	For	the	operation	of	Image	Express	Utility	Lite,	see	the	help	of	Image	Express	Utility	Lite.
What you can do with...

171
8. User Supportware
 When connecting with the projector is establised, you can operate the control window to control the projector.
NOTE:
•	 When	 [POWER-SAVING]	 or	[NETWORK	 STANDBY]	is	selected	 for	[STANDBY	 MODE]	from	the	menu,	 the	projector	 that	is	turned	
off will not be displayed in the select window for destination
•	 When	the	PA500U	is	found,	"1280	x	800"	will	be	displayed	in	the	resolution	field.
Control	 Window	Operations
(1) (2) (3) (4) (5)
(6)
(1)  (Source)  �����Selects an...

172
8. User Supportware
 Projecting an Image from an Angle (Geometric Correction Tool 
in Image Express Utility Lite)
 
The	 Geometric	 Correction	Tool	(GCT)	 function	 allows	you	to	correct	 distortion	 of	images	 projected	 even	from	an	
angle. 	
What you can do with GCT
•	 The	GCT	feature	includes	the	following	three	functions
•	4-point	 Correction:	You 	can 	fit 	a 	projected 	image 	within 	the 	border 	of 	the 	screen 	easily 	by 	align 	the 	four 	corners	
of	an	image	to	the	ones	of	the	screen.
•...

173
8. User Supportware
3.	 Use	the	mouse	to	click	the	[ • ]	mark	of	which	corner	you	wish	to	move.
 The currently selected [ • ] mark will turn red.
(In the above example, Windows screens are omitted for clarification.)
4.	 Drag	the	selected	[ • ]	mark	to	the	point	you	wish	to	correct	and	drop	it.
•	 When	 you	click	 somewhere	 within	the	project	 image	area,	the	nearest	 [	• ] mark will go to the position where 
the mouse cursor is.
5.  Repeat Step 3 and 4 to correct the distortion of the projected...

174
8. User Supportware
  Projecting  Images  or  Videos  from  the  Projector  over  a  LAN 
(Image Express Utility 2.0)
What you can do with Image Express Utility 2.0
•	 Using	Image	Express	 Utility	2.0	allows	 you	to	send	 the	screens	 of	your	 computers	 to	the	 projector	 via	wired/wire-
less	LAN.
	 The	 difference	 from	Image	 Express	 Utility	Lite	is	that	 projected	 images	can	be	sent	 from	 a	computer	 to	not	 only	
one	projector	but	also	to	two	or	more	projectors	at	the	same	time.
	 When...

175
8. User Supportware
•	 Projected	images	can	be	transferred	and	saved	to	computers.
	 When	“Meeting	Mode”	is	 used,	 projected	 images	can	be	sent	 to	the	 computers	 of	all	 the	 participants	 (attendants)	
of	a	“Meeting”. 	The	received	images	can	be	saved	to	your	computer	with	a	memo	(text	data)	attached.
Attendant
Attendant Presenter
Attendant
•	 1-click	switching	of	presenter
	 When	
switching	to	another	 presenter	 during	the	conference,	 the	participants	 (attendants)	 can	simply	 click	a	button...

176
8. User Supportware
Basic Operation of Image Express Utility 2.0
This	section	explains	the	following	three	cases	as	examples	of	operating	Image	Express	Utility	2.0.
(1)	 Transferring	images	to	the	projector
(2)	 Holding	a	conference
(3)	 Participating	in	a	conference
Sending	Images	to	Projector
•	Connecting	projector
1	 Turn	on	the	power	to	the	projector	for	which	LAN	has	been	set.
2	 Click	Windows	 [Start]	→	[All	 Programs]	→	[NEC	 Projector	 User	Supportware]	→	[Image	 Express	 Utility	2.0]	
→...

177
8. User Supportware
4	 Check()	the	projector	to	connect	and	click	[Connect].
 If the name of the projector to connect is not on the list or if it is h\
idden, click [Update].
Click4-1
Click4-2
 The screen of your computer will be projected from the projector.
 At this time, the input signal of the projector will automatically change to “NETWORK”.
NOTE:
•	 When	the	PA500U	is	found,	"1280	x	800"	will	be	displayed	in	the	resolution	field.
•	Transferring	images
When	 your	computer	 is	connected...

178
8. User Supportware
•	Stopping	or	resuming	the	transmission	of	images
The	transmission	of	the	screen	of	the	computer	to	the	projector	can	be	temporarily	stopped	and	then	resumed.
1	 Click	the	projector	icon	()	on	the	Windows	taskbar.
 A pop-up menu will be displayed.
2	 Click	[Stop	Sending].
 The projector icon on the taskbar will change ( → ).
NOTE:
Even	if	the	screen	of	the	computer	is	changed	in	this	status,	the	image	projected	from	the	projector	does	not	change.
To	manipulate	the	screen	that...