NEC Projector P502H User Manual
Here you can view all the pages of manual NEC Projector P502H User Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
40 Menu ItemDefaultOptions SETUP MENU COLOR SELECT COLORCOLOR, MONOCHROME SOURCE DISPLAY ONOFF, ON ID DISPLAY ONOFF, ON ECO MESSAGE OFFOFF, ON DISPLAY TIME AUTO 45 SECMANUAL, AUTO 5 SEC, AUTO 15 SEC, AUTO 45 SEC BACKGROUND BLUEBLUE, BLACK, LOGO 3D CAUTION MESSAGE ONOFF, ON FILTER MESSAGE OFFOFF, 100H, 500H, 1000H, 2000H INSTALLATION ORIENTATION DESKTOP FRONT DESKTOP FRONT, CEILING REAR, DESKTOP REAR, CEILING FRONT CONTROL PANEL LOCK OFFOFF, ON SECURITY OFFOFF, ON COMMUNICATION SPEED 38400bps4800bps,...
Page 52
![Page 52
41
Menu ItemDefaultOptionsINFO�USAGE TIME(B)LAMP LIFE REMAINING (B)
LAMP HOURS USED (B)
FILTER HOURS USED (B)
TOTAL CARBON SAVINGS (B)
TOTAL COST SAVINGS (B)
SOURCE(1) (B)RESOLUTION
HORIZONTAL FREQUENCY
VERTICAL FREQUENCY
SYNC TYPE SEPARATE SYNC, COMPOSITE SYNC, SYNC ON GREEN, SYNC ON
VIDEO
SYNC POLARITY
SCAN TYPE INTERLACE, NON-INTERLACE
SOURCE(2) (B)SIGNAL TYPE RGB, VIDEO, YCbCr
VIDEO TYPE
NTSC, NTSC3�58, NTSC4�43, PAL, PAL-M, PAL-N, PAL60, SECAMBIT DEPTH 8[bits], 10[bits], 12[bits]
VIDEO LEVEL FULL,...](http://img.usermanuals.tech/thumb/54/100121/w300_projector_manual_9098_d-51.png "Page 52
41
Menu ItemDefaultOptionsINFO�USAGE TIME(B)LAMP LIFE REMAINING (B)
LAMP HOURS USED (B)
FILTER HOURS USED (B)
TOTAL CARBON SAVINGS (B)
TOTAL COST SAVINGS (B)
SOURCE(1) (B)RESOLUTION
HORIZONTAL FREQUENCY
VERTICAL FREQUENCY
SYNC TYPE SEPARATE SYNC, COMPOSITE SYNC, SYNC ON GREEN, SYNC ON
VIDEO
SYNC POLARITY
SCAN TYPE INTERLACE, NON-INTERLACE
SOURCE(2) (B)SIGNAL TYPE RGB, VIDEO, YCbCr
VIDEO TYPE
NTSC, NTSC3�58, NTSC4�43, PAL, PAL-M, PAL-N, PAL60, SECAMBIT DEPTH 8[bits], 10[bits], 12[bits]
VIDEO LEVEL FULL,...")
41 Menu ItemDefaultOptionsINFO�USAGE TIME(B)LAMP LIFE REMAINING (B) LAMP HOURS USED (B) FILTER HOURS USED (B) TOTAL CARBON SAVINGS (B) TOTAL COST SAVINGS (B) SOURCE(1) (B)RESOLUTION HORIZONTAL FREQUENCY VERTICAL FREQUENCY SYNC TYPE SEPARATE SYNC, COMPOSITE SYNC, SYNC ON GREEN, SYNC ON VIDEO SYNC POLARITY SCAN TYPE INTERLACE, NON-INTERLACE SOURCE(2) (B)SIGNAL TYPE RGB, VIDEO, YCbCr VIDEO TYPE NTSC, NTSC3�58, NTSC4�43, PAL, PAL-M, PAL-N, PAL60, SECAMBIT DEPTH 8[bits], 10[bits], 12[bits] VIDEO LEVEL FULL,...
Page 53
![Page 53
42
❸ Menu Descriptions & Functions [SOURCE]
HDMI1 and HDMI2
Selects the HDMI compatible equipment connected to your HDMI 1 IN or HDMI 2 IN terminal.
COMPUTER
Selects the computer connected to your COMPUTER input terminal signal.
NOTE: When the component input signal is connected to the COMPUTER IN terminal, select [COMPUTER].
VIDEO
Selects what is connected to your VIDEO input-VCR, D
VD pla yer or document camer a.
HDBaseT
Projects the signal transmitted from the terminals supported HDBaseT. (→ page...](http://img.usermanuals.tech/thumb/54/100121/w300_projector_manual_9098_d-52.png "Page 53
42
❸ Menu Descriptions & Functions [SOURCE]
HDMI1 and HDMI2
Selects the HDMI compatible equipment connected to your HDMI 1 IN or HDMI 2 IN terminal.
COMPUTER
Selects the computer connected to your COMPUTER input terminal signal.
NOTE: When the component input signal is connected to the COMPUTER IN terminal, select [COMPUTER].
VIDEO
Selects what is connected to your VIDEO input-VCR, D
VD pla yer or document camer a.
HDBaseT
Projects the signal transmitted from the terminals supported HDBaseT. (→ page...")
42 ❸ Menu Descriptions & Functions [SOURCE] HDMI1 and HDMI2 Selects the HDMI compatible equipment connected to your HDMI 1 IN or HDMI 2 IN terminal. COMPUTER Selects the computer connected to your COMPUTER input terminal signal. NOTE: When the component input signal is connected to the COMPUTER IN terminal, select [COMPUTER]. VIDEO Selects what is connected to your VIDEO input-VCR, D VD pla yer or document camer a. HDBaseT Projects the signal transmitted from the terminals supported HDBaseT. (→ page...
Page 54
![Page 54
43
❹ Menu Descriptions & Functions [ADJUST]
[PICTURE]
[PRESET]
This function allows you to select optimized settings for your projected image.
You can adjust neutral tint for yellow, cyan or magenta.
There are eight factory presets optimized for var ious types of images. You can also use [DETAIL SETTINGS] to set
user adjustable settings to customize each gamma or color.
Your settings can be stored in [PRESET 1] to [PRESET 8].
HIGH-BRIGHT ��������Recommended for use in a brightly lit room�
PRESENTATION...](http://img.usermanuals.tech/thumb/54/100121/w300_projector_manual_9098_d-53.png "Page 54
43
❹ Menu Descriptions & Functions [ADJUST]
[PICTURE]
[PRESET]
This function allows you to select optimized settings for your projected image.
You can adjust neutral tint for yellow, cyan or magenta.
There are eight factory presets optimized for var ious types of images. You can also use [DETAIL SETTINGS] to set
user adjustable settings to customize each gamma or color.
Your settings can be stored in [PRESET 1] to [PRESET 8].
HIGH-BRIGHT ��������Recommended for use in a brightly lit room�
PRESENTATION...")
43 ❹ Menu Descriptions & Functions [ADJUST] [PICTURE] [PRESET] This function allows you to select optimized settings for your projected image. You can adjust neutral tint for yellow, cyan or magenta. There are eight factory presets optimized for var ious types of images. You can also use [DETAIL SETTINGS] to set user adjustable settings to customize each gamma or color. Your settings can be stored in [PRESET 1] to [PRESET 8]. HIGH-BRIGHT ��������Recommended for use in a brightly lit room� PRESENTATION...
Page 55
![Page 55
44
[DETAIL SETTINGS]
Storing Your Customized Settings [REFERENCE]
This function allows you to store your customized settings in [PRESET 1] to [PRESET 8].
First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERATURE].
HIGH-BRIGHT ��������Recommended for use in a brightly lit room�
PRESENTATION �����Recommended for making a presentation using a PowerPoint file�
VIDEO ��������������������Recommended for typical TV program viewing�
MOVIE...](http://img.usermanuals.tech/thumb/54/100121/w300_projector_manual_9098_d-54.png "Page 55
44
[DETAIL SETTINGS]
Storing Your Customized Settings [REFERENCE]
This function allows you to store your customized settings in [PRESET 1] to [PRESET 8].
First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERATURE].
HIGH-BRIGHT ��������Recommended for use in a brightly lit room�
PRESENTATION �����Recommended for making a presentation using a PowerPoint file�
VIDEO ��������������������Recommended for typical TV program viewing�
MOVIE...")
44 [DETAIL SETTINGS] Storing Your Customized Settings [REFERENCE] This function allows you to store your customized settings in [PRESET 1] to [PRESET 8]. First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERATURE]. HIGH-BRIGHT ��������Recommended for use in a brightly lit room� PRESENTATION �����Recommended for making a presentation using a PowerPoint file� VIDEO ��������������������Recommended for typical TV program viewing� MOVIE...
Page 56
![Page 56
45
[CONTRAST]
Adjusts the intensity of the image according to the incoming signal.
[BRIGHTNESS]
Adjusts the brightness level or the back raster intensity.
[SHARPNESS]
Controls the detail of the image.
[COLOR]
Increases or decreases the color saturation level.
[HUE]
Varies the color level from +/− green to +/− blue. The red level is used as ref erence.
Input signalCONTRASTBRIGHTNESS SHARPNESS COLORHUE
COMPUTER/HDMI/HDBaseT (RGB)Ye sYe sYe s NoNo
COMPUTER/HDMI/HDBaseT (COMPONENT) Ye s
Ye sYe sYe sYe s...](http://img.usermanuals.tech/thumb/54/100121/w300_projector_manual_9098_d-55.png "Page 56
45
[CONTRAST]
Adjusts the intensity of the image according to the incoming signal.
[BRIGHTNESS]
Adjusts the brightness level or the back raster intensity.
[SHARPNESS]
Controls the detail of the image.
[COLOR]
Increases or decreases the color saturation level.
[HUE]
Varies the color level from +/− green to +/− blue. The red level is used as ref erence.
Input signalCONTRASTBRIGHTNESS SHARPNESS COLORHUE
COMPUTER/HDMI/HDBaseT (RGB)Ye sYe sYe s NoNo
COMPUTER/HDMI/HDBaseT (COMPONENT) Ye s
Ye sYe sYe sYe s...")
45 [CONTRAST] Adjusts the intensity of the image according to the incoming signal. [BRIGHTNESS] Adjusts the brightness level or the back raster intensity. [SHARPNESS] Controls the detail of the image. [COLOR] Increases or decreases the color saturation level. [HUE] Varies the color level from +/− green to +/− blue. The red level is used as ref erence. Input signalCONTRASTBRIGHTNESS SHARPNESS COLORHUE COMPUTER/HDMI/HDBaseT (RGB)Ye sYe sYe s NoNo COMPUTER/HDMI/HDBaseT (COMPONENT) Ye s Ye sYe sYe sYe s...
Page 57
![Page 57
46
[IMAGE OPTIONS]
Adjusting Clock and Phase [CLOCK/PHASE]
This allows you to manually adjust CLOCK and PHASE.
CLOCK �������������������Use this item to fine tune the computer image or to remove any vertical banding that might appear� This
function adjusts the clock frequencies that eliminate the horizontal ban\
ding in the image�
This adjustment may be necessary when you connect your computer for the first time�
PHASE �������������������Use this item to adjust the clock phase or to reduce video noise,...](http://img.usermanuals.tech/thumb/54/100121/w300_projector_manual_9098_d-56.png "Page 57
46
[IMAGE OPTIONS]
Adjusting Clock and Phase [CLOCK/PHASE]
This allows you to manually adjust CLOCK and PHASE.
CLOCK �������������������Use this item to fine tune the computer image or to remove any vertical banding that might appear� This
function adjusts the clock frequencies that eliminate the horizontal ban\
ding in the image�
This adjustment may be necessary when you connect your computer for the first time�
PHASE �������������������Use this item to adjust the clock phase or to reduce video noise,...")
46 [IMAGE OPTIONS] Adjusting Clock and Phase [CLOCK/PHASE] This allows you to manually adjust CLOCK and PHASE. CLOCK �������������������Use this item to fine tune the computer image or to remove any vertical banding that might appear� This function adjusts the clock frequencies that eliminate the horizontal ban\ ding in the image� This adjustment may be necessary when you connect your computer for the first time� PHASE �������������������Use this item to adjust the clock phase or to reduce video noise,...
Page 58
![Page 58
47
Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL]
Adjusts the image location horizontally and vertically.
- An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction.
- The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the
current signal. The next time you project the signal with the same resolution, horizontal and ver tical frequency,
its adjustments will be called up and applied.
To delete...](http://img.usermanuals.tech/thumb/54/100121/w300_projector_manual_9098_d-57.png "Page 58
47
Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL]
Adjusts the image location horizontally and vertically.
- An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction.
- The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the
current signal. The next time you project the signal with the same resolution, horizontal and ver tical frequency,
its adjustments will be called up and applied.
To delete...")
47 Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. - An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction. - The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the current signal. The next time you project the signal with the same resolution, horizontal and ver tical frequency, its adjustments will be called up and applied. To delete...
Page 59
![Page 59
48
Selecting Aspect Ratio [ASPECT RATIO]
The term “aspect ratio” ref ers to the r atio of width to height of a projected image .
The projector automatically determines the incoming signal and displays it in its appropriate aspect ratio.
• This table shows typical resolutions and aspect ratios that most computers support.
ResolutionAspect RatioVGA640 × 4804:3
SVGA800 × 6004:3
XGA1024 × 7684:3
WXGA1280 × 76815:9
WXGA1280 × 80016:10
WXGA+1440 × 90016:10
SXGA1280 × 10245:4
SXGA+1400 × 10504:3
UXGA1600 ×...](http://img.usermanuals.tech/thumb/54/100121/w300_projector_manual_9098_d-58.png "Page 59
48
Selecting Aspect Ratio [ASPECT RATIO]
The term “aspect ratio” ref ers to the r atio of width to height of a projected image .
The projector automatically determines the incoming signal and displays it in its appropriate aspect ratio.
• This table shows typical resolutions and aspect ratios that most computers support.
ResolutionAspect RatioVGA640 × 4804:3
SVGA800 × 6004:3
XGA1024 × 7684:3
WXGA1280 × 76815:9
WXGA1280 × 80016:10
WXGA+1440 × 90016:10
SXGA1280 × 10245:4
SXGA+1400 × 10504:3
UXGA1600 ×...")
48 Selecting Aspect Ratio [ASPECT RATIO] The term “aspect ratio” ref ers to the r atio of width to height of a projected image . The projector automatically determines the incoming signal and displays it in its appropriate aspect ratio. • This table shows typical resolutions and aspect ratios that most computers support. ResolutionAspect RatioVGA640 × 4804:3 SVGA800 × 6004:3 XGA1024 × 7684:3 WXGA1280 × 76815:9 WXGA1280 × 80016:10 WXGA+1440 × 90016:10 SXGA1280 × 10245:4 SXGA+1400 × 10504:3 UXGA1600 ×...
Page 60
![Page 60
49
Sample image when the appropriate aspect ratio is automatically determined
[Computer signal]
Aspect ratio of incoming signal4:35:416:9 15:916:10
Sample image when the appro-priate aspect ratio is automati-cally determined
P502H/P452H
P502W/P452W
[Video signal]
Aspect ratio of incoming signal4:3 Letterbox Squeeze
Sample image when the aspect ratio is automatically determined
NOTE: To display a letterbox signal prop-
erly, select [LETTERBOX].
NOTE: To display a squeezed signal prop-
erly, select...](http://img.usermanuals.tech/thumb/54/100121/w300_projector_manual_9098_d-59.png "Page 60
49
Sample image when the appropriate aspect ratio is automatically determined
[Computer signal]
Aspect ratio of incoming signal4:35:416:9 15:916:10
Sample image when the appro-priate aspect ratio is automati-cally determined
P502H/P452H
P502W/P452W
[Video signal]
Aspect ratio of incoming signal4:3 Letterbox Squeeze
Sample image when the aspect ratio is automatically determined
NOTE: To display a letterbox signal prop-
erly, select [LETTERBOX].
NOTE: To display a squeezed signal prop-
erly, select...")
49 Sample image when the appropriate aspect ratio is automatically determined [Computer signal] Aspect ratio of incoming signal4:35:416:9 15:916:10 Sample image when the appro-priate aspect ratio is automati-cally determined P502H/P452H P502W/P452W [Video signal] Aspect ratio of incoming signal4:3 Letterbox Squeeze Sample image when the aspect ratio is automatically determined NOTE: To display a letterbox signal prop- erly, select [LETTERBOX]. NOTE: To display a squeezed signal prop- erly, select...