NEC Projector P502H User Manual

80
Connecting HDMI Input
You	can	connect	the	HDMI	output	of	your	DVD	player,	hard	disk	play er,	Blu-ra y	play er,	or	notebook	type	PC	to	the	
HDMI	IN	terminal	of	your	projector.
HDMI 1 IN
HDMI 2 IN
HDMI	cable	(not	supplied)
Use	High	Speed	HDMI® Cable.
Audio cable (not supplied)
•	 Select	the	source	name	for	its	appropriate	input	terminal	after	turning	on	the	projector.
Input	terminalSOURCE	button	on	the	projector	
cabinetButton	on	the	remote	control
HDMI	1	IN	HDMI1(HDMI1*)
HDMI	2	IN	HDMI2(HDMI2*)
•	 When...

81
Connecting your document camera
You	can	connect	your	document	camera	and	project	printed	documents,	etc.
COMPUTER INVIDEO IN
Name, position, and direction of 
terminals are vary depending on 
camera
	model.	Please	chec
k
	user's	manual of y

our camera for details.
Computer cable (VGA) (supplied)
Video cable (not supplied)
•	 Select	the	source	name	for	its	appropriate	input	terminal	after	turning	on	the	projector.
Input	terminalSOURCE	button	on	the	projector	
cabinetButton	on	the	remote	control...

82
Connecting to a Wired LAN
The	projector	comes	standard	with	the	Ethernet/HDBaseT	port	(RJ-45)	and	the	LAN	port	which	provide	a	LAN	con-
nection	using	a	LAN	cable.	
To	use	a	LAN	connection,	you	are	required	to	set	the	wired	LAN	settings	on	the	projector	menu.	Select	[SETUP]	→ 
[INSTALLATION]	→	[NETWORK	SETTINGS].	(→	page	58).
The	network	settings	can	also	be	selected	from	the	APPS	menu.
Example of LAN connection
Example	of	wired	LAN	connection
Ethernet
HDBaseT
ServerHub
LAN cable (not supplied)
NOTE:...

83
Connecting to a Wireless LAN (Optional: NP05LM series)
The	USB	Wireless	LAN	Unit	also	provides	a	wireless	LAN	connection.	To	use	a	wireless	LAN	connection,	you	are	
required	to	assign	an	IP	address	to	the	projector.
Important:	
•	 If	you	use	the	projector	with	the	USB	Wireless	LAN	Unit	in	the	area	where	the	use	of	wireless	LAN	equipment	is	prohibited,	remove	
the	USB	Wireless	LAN	Unit	from	the	projector.
•	 Buy	the	appropriate	USB	Wireless	LAN	Unit	for	your	country	or	area.
NOTE:	
•	 Your	computer’s...

84
4. Mount the wireless LAN cover.
(1)	Insert	the	hook	on	the	back	of	the	cov er	into	the	groo ve	in	the	
projector and close the wireless LAN cover.
(2)	Turn	the	screw	clockwise	to	tighten	it.
Groove
Hook
* To remove the USB Wireless LAN Unit, disconnect the power 
cord and use the above procedure.
NOTE:	
•	 Do	not	press	the	button	on	the	USB	Wireless	LAN	Unit.	The	button	does	
not	work	with	this	model.
5. Installation and Connections  

85
Example of wireless LAN connection
To	use	a	LAN	connection,	you	are	required	to	set	the	Wireless	LAN	settings	on	the	projector	menu.	Select	[SETUP]	
→	[INSTALLATION]	→	[NETWORK	SETTINGS].	(→	page	58).
The	network	settings	can	also	be	selected	from	the	APPS	menu.
 
PC with wireless LAN card 
insertedPC with built-in wireless 
LAN function
Wired LAN
Wireless access point
USB Wireless LAN Unit
5. Installation and Connections  

86
Connecting to a HDBaseT transmission device (sold commercially)
HDBaseT	is	a	connection	standard	for	home	appliances	that	is	established	by	the	HDBaseT	Alliance.
Use	a	LAN	cable	sold	commercially	to	connect	the	Ethernet	/	HDBaseT	port	of	the	projector	(RJ-45)	to	a	HDBaseT	
transmission	device	sold	commercially.
Control	signals	(serial	and	LAN)	and	remote	control	signals	(IR	commands)	from	an	exter nal	devic e	are	only	suppor ted	
when	the	projector’s	power	is	turned	on.
Connection example...

87
TIP:
•	 With	the	projector’s	Ethernet/HDBaseT	port,	remote	control	is	not	available	when	the	projector	is	in	the	standby	mode	(serial	
communications	is	not	available).	(Remote	control	becomes	available	when	the	projector’s	power	is	on).	The	2	(two)	methods	
below	can	be	used	to	turn	on	the	projector’s	power	when	it	is	in	standby	mode.
1.	The	projector	can	be	operated	by	connecting	the	computer	and	projector	to	the	network	(on	the	projector,	using	the	LAN	port	
and	PC	Control	Utility	application	with...

88
6. APPS MENU
❶ What can you do with the APPS MENU?
It	becomes	available	to	select	the	expansion	functions	indicated	in	below	and	various	setting	with	the	APPS	MENU.
For	displaying	the	APPS	MENU,	press	the	APPS	button	on	the	remote	or	select	[APPS]	as	the	[SOURCE]	on	the	
onscreen	menu.
INFORMATION
Detailed	information	about	each	function	on	the	APPS	MENU	is	explained	on	our	web	site.	Please	search	it	by	the	
model	name	of	your	projector.
http://www.nec-display.com/dl/en/pj_manual/lineup.html
APPS MENU...

89
VIEWER
Select	the	saved	images/movies	and	project	them	by	the	projector.	This	function	is	available	f or	e xplained	belo w:
(1)	Projector	Memory:	Images	and	movies	temporarily	sav ed	in	the	projector’s	built-in	memory	utilizing	the	WEB	
SHARING.
(2)	USB	Memory:	Images	and	movies	sa ved	in	the	USB	memor y	connected	with	the	projector .
(3)	Common	Folder:	Images	and	movies	sa ved	in	the	common	f older	in	a	netw ork	connected	with	the	projector .
REMOTE DESKTOP CONNECTION
•	 Select	the	computer	connected...