NEC Projector Np4001 User Manual

5. Using On-Screen Display 
89 
DynamicBlack 
DynamicBlack enables you to improve  the black level of the projector. 
 
 
Remote Sensor 
Set the operating range for the wireless remote control. 
 
Select from the following:  ƒ Front/Back 
ƒ  Front 
ƒ  Back 
 
LAN Settings 
See LAN Settings on page 91 . 
 
Standby Mode 
There are two standby modes available:  Normal and Power-Saving. Power-Saving 
mode allows you to put the projector in t he standby condition to consume less power 
than Normal. 
 
Note:...

5. Using On-Screen Display 
90
Select from the following: ƒ Normal  
ƒ  Power-saving 
Note:   
The HTTP server functions are not  available during Power-saving mode. 
The MONITOR OUT function is not av ailable during Power-saving mode. 
Control through the PC Control connect or and LAN mode is not available during 
Power-saving mode. For PC control and LAN  mode of the projector it is recom-
mended to leave the projector in the Normal mode. 
 
Normal mode:    Power indicator: Orange light...

5. Using On-Screen Display 
91 
LAN Settings 
The LAN settings tab is accessed by using the Setup/Installation tab and contains gen-
eral LAN settings. 
 
The following table lists all functions with a description and the default setting. 
ITEM DESCRIPTION 
DHCP  Select either a static IP or DHCP IP setting by selecting the appropriate radio 
button. 
IP Address  Displays the IP address. 
Subnet 
Mask Displays the subnet mask. 
Gateway Enable or disable the network gatewa
y setting. Click on the radio...

5. Using On-Screen Display 
92
Options 
The Options tab contains miscellaneous setup menu settings such as Power Manage-
ment and Default Source Select and can be accessed by using the Setup Menu. 
 
The following table lists all functions with a description and the default setting. 
ITEM DESCRIPTION 
Auto Start  Set this item on to enable the projector to power up when AC plug in.  
Range: on or off (see page 93
). 
Power  
Management  Select the amount of time the projector remains idle before...

5. Using On-Screen Display 
93 
ITEM DESCRIPTION 
Color System Select the default Color System to use for Video or S-Video input.  
Range: Auto, NTSC, PAL, SECAM (see page 95
). 
Filter Message  Set this item to on to have the projector display a message when the air 
filter needs servicing.  
Range: Off, 100[H], 200[H], 
500[H], 1000[H] (see page 
95). 
 
Auto Start 
Auto Start enables the projector to start automatically when the power cable is con-
nected to an active power outlet and the main power...

5. Using On-Screen Display 
94
Select from the following: ƒ Off 
ƒ  5 minutes 
ƒ  10 minutes 
ƒ  20 minutes 
ƒ  30 minutes 
 
Screen Trigger 
Set Screen Trigger to On to enable the projector to automatically lower the projection 
screen when powering  on. When powering off, Screen tr igger stops sending a low volt-
age trigger to the screen controller and the screen goes up. 
 
 
Fan Mode 
Fan Mode is used to set the speed of the internal cooling fan. 
 
The Fan Mode option default is  Auto, which...

5. Using On-Screen Display 
95 
Last – Uses the most recently used image source. 
Auto  – Auto detects the default image source. 
Computer1/2/3  – Uses Computer1, 2 or 3 as the default image source. 
Component  – Uses last component as the default image source. 
Video  – Uses last video input as default image source. 
S-Video  – Uses last S-video input as default image source. 
 
Color System 
Color System enables you to select video st andards manually. In the normal condition, 
select  Auto and the...

5. Using On-Screen Display 
96
u Information Menu Descriptions and Functions 
The information menu provides only screens to  access details quickly. The Information menu 
contains four distinct tabs. 
Usage Time 
The Usage Time tab displays information about lamp usage and remaining lamp life. 
 
The following table lists all items with a description. 
ITEM DESCRIPTION 
Lamp1 Life  
Remaining  Displays the Lamp1 life remaining as a percentage. 
Lamp2 Life  
Remaining Displays the Lamp2 life remaining as...

5. Using On-Screen Display 
97 
Source 
The Source tab displays various source and frequency values at a glance. 
 
The following table lists all items with a description. 
ITEM DESCRIPTION 
Input Terminal  Displays the Input Terminal that is presently being used. 
Source Name  Displays the Source name of the signal presently being used. 
Horizontal  
Frequency  Displays Horizontal Frequency in KHz. 
Vertical  
Frequency Displays Vertical Frequency in Hz. 
Video Type 
Displays Video type. 
Sync Type...

5. Using On-Screen Display 
98
LAN 
The LAN tab displays LAN settings as previously defined (see LAN Settings on page 89).