NEC Projector M260X User Manual

51
3. Convenient Features
3.	 Select	the	projector	you	wish	to	connect,	and	click	“Connect”.
 The target selection window will be displayed.
4.	 Place	a	check	mark	for	projectors	to	be	connected, 	and	then	click	“Connect”.
•	 When	one	or	more	 projectors	 are	displayed,	 from	the	menu	 on	the	 projector,	 select	[INFO.]	→ [WIRELESS LAN] 
→ [IP ADDRESS].
  When connecting with the projector is establised, you can operate the control window to control the projector. (→ 
page 39)
NOTE:
•	 When...

52
4. Using the Viewer
❶ What you can do with the Viewer
The	Viewer	has	the	following	features.
•	 When	 a	commercially	 available	USB	memory	 that	stores	 image	files	is	inserted	 into	the	USB	 port	(Type	 A)	of	the	
projector,	the	 Viewer	allows	you	to	view	the	image	files	on	the	USB	memory.
	 Even	if	no	computer	is	available,	presentations	can	be	conducted	simply	with	the	projector. 	
•	 Supported	graphic	format	is	JPEG.
•	 The	Viewer	displays	 the	thumbnail	 screen	(JPEG	Exif	only)	 on	which	 you	can...

53
4. Using the Viewer
NOTE
•	 The	USB	port	of	the	projector	does	not	support	USB	hub.	
•	 The	following	 operations	 by	using	 the	buttons	 on	the	 projector	 are	not	 possible	 when	the	VIEWER	 screen	such	as	the	 slide	 screen	
and	the	thumbnail	screen	is	displayed.
-	 Keystone	correction	by	using	the	▲/▼	button
-	 Auto	Adjustment	by	using	the	◀	or	AUTO	ADJ.	button
-	 Volume	control	with	the	◀	or	▶	button
	 To	 perform	 Keystone	 correction	 or	Source	 selection	 during	display	 of	the	 Viewer,	 press...

54
4. Using the Viewer
❷ Projecting images stored in a USB memory device
This	section	explains	the	basic	operation	of	the	Viewer.	
The	explanation	 provides	the	operational	 procedure	when	the	Viewer	 toolbar	 (→	page	58)	 is	 set	 to	the	 factory	 de-
fault.
-	Starting	the	 Viewer .......................................................................below
-	Removing	the	USB	memory	from	the	projector  .......................page	56
-	Exiting	the...

55
4. Using the Viewer
4.	 Press	the	ENTER	button.
 The thumbnail screen will be displayed. (→ page 57)
5.	 Use	the	▲▼◀ or ▶	button	to	select	an	icon.
•	 The 	→ (arrow) symbol on the right indicates there are more 
pages. pressing the PAGE  ▽ (page down) button will show 
the next page: pressing the PAGE  △ (page up) will show 
the previous page.
6.	 Press	the	ENTER	button.
  The selected slide will be displayed.
•	 When 	a 	folder 	icon 	is 	selected, 	icons 	contained 	in 	the 	folder	
will be...

56
4. Using the Viewer
Removing  the  USB  memory  from  the  pro-
jector
1.	 Select	the	 VIEWER	start	screen.
 Press the EXIT button with no menu displayed.
2.	 Remove	the	USB	memory	from	the	projector.
	 Make	 sure	that	the	LED	 on	the	 USB	 memory	 is	not	
flashing before removing the USB memory.
NOTE:	 If	you	 remove	 the	USB	 memory	 from	the	projector	 with	
a	slide	 displayed,	 the	projector	 may	not	operate	 correctly.	 If	
this	happens, 	turn 	off 	the 	projector 	and 	unplug 	the 	power	
cord....

57
4. Using the Viewer
Parts of each screen
The	Viewer	has	four	screens.
(1) Viewer start screen (3) Thumbnail screen (9) Slide screen/
(11) Slideshow screen
NameDescription
(1)	 Viewer	start	screenThis	screen	will	be	displayed	first	when	you	select	the	 Viewer.
(2)	USB	iconThis	icon	indicates	that	the	USB	memory	is	inserted	into	the	projector.
(3)	Thumbnail	screenThis	 screen	 will	show	 a	list	 of	folders	 and	image	 files	stored	 in	the	 USB	 memory. 	The	
JPEG	Exif	files	will	be	displayed	in...

58
4. Using the Viewer
Using the toolbar
1.	 Press	the	MENU	button.
 The toolbar will be displayed.
 The SOURCE screen will be displayed as Viewer connection screen.
2.	 Use	the	◀ or ▶	button	to	select	an	item	and	use	the	▲ or ▼	button	to	select	its	available	option.
 When the cursor is placed, the selected item will be changed to yellow.
 The ▲ or ▼ shows more available choices.
3.	 Press	the	ENTER	button.
 The selected item will be displayed.
4.	 Press	the	MENU	button	two	times.
 The  toolbar  will  be...

59
4. Using the Viewer
Slide	toolbar
MenuOptionsDescription
(1)	DisplayCloses	the	menu	and	switches	to	the	slide	screen.
Closes	the	menu	and	displays	the	thumbnail	screen.
Closes	the	menu	and	starts	the	slideshow	from	the	highlighted	item.
(2)		Image	
display
Closes	the	menu	and	displays	the	image	in	its	actual	size.
Closes	 the	menu	 and	displays	 the	image	 in	the	 projector’s	 maximum	reso-
lution.
(3)		 Clockwise	
rotation
—Close	the	menu	and	rotate	the	image	90°clockwise
(4)		Counter-
clockwise...

60
4. Using the Viewer
 Converting PowerPoint files to Slides (Viewer PPT Converter 
3.0)
Using	 Viewer	 PPT	Converter	 3.0	contained	 on	the	 supplied	 NEC	Projector	 CD-ROM	 allows	you	to	convert	 Power-
Point	files	into	JPEG	 files.	Converted	 JPEG	files	can	be	saved	 to	a	USB	 memory. 	When	 the	USB	 memory	 inserted	
into	the	projector,	 these	JPEG	 files	can	be	displayed	 with	the	viewer	 function	 of	the	 projector	 without	connecting	 a	
computer.
NOTE:
By	using	PPT	Converter	3.0,	PowerPoint...