NEC Projector M260X User Manual

11
1. Introduction
Operating Environment
The	following	 is	the	 operating	 environment	 for	Image	 Express	 Utility	Lite.	For	 the	operating	 environment	 of	other	 soft-
ware	program,	refer	to	the	help	function	of	each	software	program.
Supported	OSWindows	7	Home	Basic
Windows	7	Home	Premium
Windows	7	Professional
Windows	7	Ultimate
Windows	7	Enterprise
Windows	 Vista	Home	Basic
Windows	Vista	Home	Premium
Windows	Vista	Business
Windows	Vista	Ultimate
Windows	Vista	Enterprise
Windows	XP	Home	Edition...

12
This	section	describes	how	to	turn	on	the	projector	and	to	project	a	picture	onto	the	screen.
1 Flow of Projecting an Image
Step 1
•	 Connecting	your	computer	/	Connecting	the	power	cord	(→	page	13)
 
Step 2 
•	 Turning	on	the	projector	(→	page	14)
 
Step 3 
•	 Selecting	a	source	(→	page	16)
 
Step 4
•	 Adjusting	the	picture	size	and	position	(→	page	17)
•	 Correcting	keystone	distortion	[KEYSTONE]	(→	page	20)
 
Step 5
•	 Adjusting	a	picture	and	sound
- Optimizing a computer signal automatically (→...

13
2. Projecting an Image (Basic Operation)
 Connecting Your Computer/Connecting the Power Cord
1.	 Connect	your	computer	to	the	projector.
 This  section  will  show  you  a  basic  connection  to  a  computer.  For  information  about  other  connections,  see  “6. 
Installation and Connections” on page 96.
 Connect the computer cable (VGA) between the projector’s COMPUTER 1 IN connector and the computer’s port 
(mini D-Sub 15 Pin). Turn two thumb screws of both connectors to fix the computer cable...

14
2. Projecting an Image (Basic Operation)
StandbyBlinkingPower	On
Steady orange lightBlinking blue lightSteady blue light
 Turning on the Projector
1.	 Slide	the	lens	cover	to	the	left	to	uncover	the	lens.
2.	 Press	the		(POWER)	 button	on	the	 projector	 cabinet	
or	the	POWER	ON	button	on	the	remote	control. 	
 The  POWER  indicator  will  turn  to  blue  and  the  projector 
will become ready to use.
TIP:	
•	 When 	the 	message	 “Projector 	is 	locked!	 Enter	your	password.”	
is 	displayed, 	it...

15
2. Projecting an Image (Basic Operation)
Note on Startup screen (Menu Language Select screen)
When	you	first	 turn	 on	the	 projector,	 you	will	get	 the	Startup	 menu.	This	 menu	 gives	you	the	opportunity	 to	select	 one	
of	the	27	menu	languages.
To	select	a	menu	language, 	follow	these	steps:
1.	 Use	the	, ,   or 	button	 to	select	 one	of	the	 27	
languages	from	the	menu.
2.	 Press	the	ENTER	button	to	execute	the	selection.
After 	this 	has 	been 	done, 	you 	can 	proceed 	to 	the 	menu...

16
2. Projecting an Image (Basic Operation)
 Selecting a Source
Selecting the computer or video source
NOTE:	Turn	on	the	computer	or	video	source	equipment	connected	to	the	projector.
Detecting	the	Signal	Automatically
Press	the 	SOURCE 	button 	once. 	The 	projector 	will 	search 	for 	the 	available	
input	source	and	display	it. 	The	input	source	will	change	as	follows: 	
COMPUTER1	→	COMPUTER2	→	HDMI	→	VIDEO	→	 S-VIDEO	→ 
VIEWER	→	USB	DISPLAY	→	COMPUTER1	→ ...
•	 With	 the	SOURCE	 screen	displayed,...

17
2. Projecting an Image (Basic Operation)
 Adjusting the Picture Size and Position
Use	the	adjustable	tilt	foot,	the	zoom	function	or	the	focus	ring	to	adjust	the	picture	size	and	position.
In this chapter drawings and cables are omitted for clarity.
Adjusting	the	throw	angle	(the	height	of	an	image)
[Tilt	foot]	(→	page	18)
Adjusting	the	left	and	right	tilt	of	an	image
[Rear	foot]	(→	page	18)
Finely	adjusting	the	size	of	an	image
[Zoom	lever]	(→	page	19)
Adjusting	the	focus
[Focus	ring]	(→	page	19)...

18
2. Projecting an Image (Basic Operation)
2
1
3
Adjustable Tilt FootAdjustable Tilt 
Foot Lever
Adjust the Tilt Foot
1.		Lift	the	front	edge	of	the	projector.
CAUTION:
Do	 not	 try	to	touch	 the	ventilation	 outlet	during	 Tilt	Foot	 adjustment	
as	it	can	 become	 heated	while	the	projector	 is	turned	 on	and	 after	 it	
is	turned	off.
2.		Push	 up	and	 hold	 the	Adjustable	 Tilt	Foot	 Lever	 on	the	 front	 of	
the	projector	to	extend	the	adjustable	tilt	foot.
3.		Lower	the	front	of	the	projector	to...

19
2. Projecting an Image (Basic Operation)
Zoom
Use	the	ZOOM	lever	to	adjust	the	image	size	on	the	screen.
Zoom Lever
Focus
Use	the	FOCUS	ring	to	obtain	the	best	focus.
Focus Ring 

20
2. Projecting an Image (Basic Operation)
 Correcting Keystone Distortion Manually
If	the 	screen	 is	tilted	 vertically,	 keystone	distortion	becomes	 large.	Automatic	 Keystone	Correction	 function	is	turned	 on	
at	the	 time	 of	shipment. 	To	 correct	 keystone	 distortion	 manually,	 proceed	with	the	following	 steps	to	correct	 keystone	
distortion. 
 
NOTE:	
•	 The	Keystone	correction	can	cause	an	image	to	be	slightly	blurred	because	the	correction	is	made	electronically.
•	 The	Keystone...