Home > NEC > Television > NEC Plasmasync 61xm4 Users Manual

NEC Plasmasync 61xm4 Users Manual

Here you can view all the pages of manual NEC Plasmasync 61xm4 Users Manual. The NEC manuals for Television are available online for free. You can easily download all the documents as PDF.

Page 1

PlasmaSync Plasma Monitor
(Enhanced split screen Model)
PlasmaSync 42XM4
PX-42XM4G
PlasmaSync 50XM5
PX-50XM5G
PlasmaSync 61XM4
PX-61XM4G
User’s Manual
Benutzerhandbuch
Manuel d’utilisation
Manual del Usuario
Manuale dell’utente
уководство пользователя
Bruksanvisning
Kullanım Kılavuzu
Εγειρίδι	 ρήσης
 

Page 2

User’s Manual
(Enhanced split screen Model)
ENGLISH
 

Page 3

En-2
Precautions
Please read this manual carefully before using your plasma monitor and
keep the manual handy for future reference.
       CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER. NO USER-SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol warns the user that uninsulated voltage
within the unit may have sufficient magnitude to cause
electric shock. Therefore, it is dangerous to make any
kind of contact...

Page 4

En-3
NOTE:
When you connect a computer to this monitor, use an RGB
cable including the ferrite core on both ends of the cable.
And regarding power cable, attach the supplied ferrite
cores. If you do not do this, this monitor will not conform
to mandatory CE or C-Tick standards.
Set the ferrite cores on both ends of the power cable
(supplied).
Use the band to fasten the ferrite core (supplied) to the
power cable.
Powercable(supplied)
corecore
bandband
 CAUTION
When disposing of used batteries, please...

Page 5

En-4
Contents
Contents of the Package
 Plasma monitor
 Power cord
 Remote control with two AAA Batteries
 Manuals (Start up Guide and CD-ROM)
 Ferrite cores
 Cable clamps
Options
• Wall mount unit
• Ceiling mount unit
• Tilt mount unit
• Tabletop Stand
• Attachable  speakers
Important Information.................................. En-2
Contents...................................................... En-4
Contents of the Package........................................En-4...

Page 6

En-5
50mm (2)
50mm (2) 50
mm (2)
Wall
Wall
50mm (2)
50mm (2)
You can attach your optional mounts or stand to the plasma monitor in one of the following two ways:
* While it is upright. (See Drawing A)
* As it is laid down with the screen face down (See Drawing B). Lay the protective sheet, which was wrapped around the
monitor when it was packaged, beneath the screen surface so as not to scratch the screen face.
* Do not touch or hold the screen face when carrying the unit.
• This device cannot be...

Page 7

En-6
Note:
1. The VIDEO1 and RGB1 terminals can be used for either INPUT or OUTPUT.
When LOOP OUT is ON, do not connect an OUTPUT signal from another unit as it may damage the other unit due
to an extraordinary load.
2. LOOP OUT can not be turned ON while signals are input to the RGB1 terminal.
3. LOOP OUT can be turned ON while signals are input to the RGB1 terminal if the POWER is switched ON.
Information
• To loop signals out to another plasma display, set the LOOP OUT to ON.
• To create a video wall,...

Page 8

En-7
Approx.
7m / 23ft 
MENU/ ENTERINPUT SELECT
DOWN UP LEFT/-RIGHT/+
/EXITVOLUME
MENU/ ENTERINPUT SELECT
DOWN UP LEFT/-RIGHT/+
/ EXITVOLUME
Top side
Bottom side 90°
:   RGB
:   RGB
:   AUTO
:   1080B
:   OFF
:   OFF
      1024768
EXITSEL.
RETURNMENU/ENTEROK
OPTION1
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
Caution when placing the plasma monitor in portrait mode
•Use the optional unit. Contact your store of purchase when installing.
•Rotate 90° clockwise as seen from the front...

Page 9

En-8
qPower
Turns the monitor’s power on and off.
wRemote sensor window
Receives the signals from the remote control.
ePOWER/STANDBY indicator
When the power is on ............................. Lights green.
When the power is in the standby mode ... Lights red.
rINPUT SELECT / EXIT
Switches the input.
Functions as the EXIT buttons in the On-Screen Menu
(OSM) mode.
Front View
MENU/ ENTERINPUT SELECT
DOWN UP LEFT/-RIGHT/+
/ EXIT VOLUME
MENU/ ENTERINPUT SELECT
DOWN UP LEFT/-RIGHT/+
/ EXIT VOLUME
4567132...

Page 10

En-9
VIDEO(IN/OUT)
(IN/OUT)AUDIO 1DVD1 / HD1R
1
3 2
(MONO)LY Cb/Pb Cr/Pr
RGB2 / DVD2 / HD2RGB 1VD HD
DV I  (
Digital  RGB)R
LAUDIO 2
(MONO)
R
LAUDIO 3
(MONO)
R/Cr/Pr G /Y B/C b/P bRGB 3
IN OUT
REMOTEEXTERNAL CONTROL
VIDEO(IN/OUT)AUDIO 1DVD1 / HD1Y L/R L/RCb / Pb Cr / PrRGB2 / DVD2 / HD2RGB 1VD L/R HD
DV I   AUDIO 2AUDIO 3R/Cr/Pr G /Y B / C b/ P bRGB 3EXTERNAL CONTROLIN OUTREMOTE
BD A
CE F G H IJK
AAC IN
Connect the included power cord here.
BEXT SPEAKER L and R
Connect speakers (optional) here. Maintain...
Start reading NEC Plasmasync 61xm4 Users Manual

Related Manuals for NEC Plasmasync 61xm4 Users Manual

All NEC manuals