NEC Plasmasync 50xm4 Users Manual

E-17
*1   Only when AUTO PICTURE is OFF
*2   RGB/PC only
Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESETREFERENCE
 OPTION2 PWR. MGT. OFF←→ONYES E-23
CINEMA MODE OFF←→ONYES E-23
LONG LIFE PLE AUTO/LOCK 1/LOCK 2/LOCK 3 YES E-23
ORBITER AUTO 1 YES E-24
AUTO 2 YES E-24
MANUAL H-DOT/V-LINE/TIME YES E-24
OFF YES E-24
INVERSE OFF YES E-24
ON WORKING TIME/WAITING TIME YES E-24
WHITE YES E-24
SCREEN WIPER OFF YES E-25
ON WORKING TIME/WAITING TIME/SPEED YES E-25
SOFT FOCUS OFF/1/2/3/4 YES E-25
GRAY LEVEL...

E-18
Picture Settings Menu
Adjusting the picture
The contrast, brightness, sharpness, color and tint can be
adjusted as desired.
Example: Adjusting the contrast
On “CONTRAST” of “PICTURE” menu, adjust the contrast.
PICTURE1 / 2
EXIT CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
NR
        NEXT PAGE
:     NORMAL
:     OFF
SEL.
RETURN
ADJ.CONTRAST52
Note: If “CAN NOT ADJUST” appears ...
When trying to enter the PICTURE submenu, make sure
PICTURE MODE is not set to DEFAULT.
Information
 Picture...

E-19
Adjusting the color to the desired level
Use this procedure to adjust the white balance for each
color temperature to achieve the desired color quality.
Example: Adjusting  the “GAIN RED” of “HIGH” color
temperature
Set “ADVANCED OSM” to “ON” in the main menu (1/
2), then perform the following operations.
On “COLOR TEMP.” of “PICTURE” menu, select “HIGH”,
then press the  MENU/ENTER button.
The “WHITE BALANCE” screen appears.
On “GAIN RED”, adjust the white balance.
WHITE BALANCE
COLOR TEMP.  HIGH...

E-20
Audio Settings Menu
Adjusting the treble, bass and left/right
balance and audio input select
The treble, bass and left/right balance can be adjusted to
suit your tastes.
Example: Adjusting the bass
On “BASS” of “AUDIO” menu, adjust the bass.
AUDIO
EXIT BASS
TREBLE
BALANCE
AUDIO INPUT1
AUDIO INPUT2
AUDIO INPUT3:     VIDEO1
:     HD/DVD1
:     RGB1
SEL.
RETURNADJ.
Note : If “CAN NOT ADJUST” appears...
Set “AUDIO INPUT” on the AUDIO menu correctly.
Information

 Audio settings menu
BASS: Controls the...

E-21
Option1 Settings Menu
Setting the on-screen menu
This sets the position of the menu, the display format
(horizontal or vertical) etc.
Example: Turning the DISPLAY OSM off
On “OPTION1” menu, select “OSM”, then press the MENU/
ENTER button.
The “OSM” menu appears.
On “DISPLAY OSM” of “OSM” menu, select “OFF”.
OSM
EXIT DISPLAY OSM
OSM ADJ.
OSM ANGLE
OSM ORBITER
OSM CONTRAST:     OFF
:     1
:     H
:     OFF
:     LOW
SEL.
RETURNADJ.
Information

 DISPLAY OSM settings
ON: The on-screen menu appears....

E-22
Information

 RGB SELECT modes
One of these 7 modes must be selected in order to
display the following signals correctly.
AUTO: Select the suitable mode for the specifications
of input signals as listed in the table “Computer input
signals supported by this system” on page E-2 of Model
Information.
STILL: To display VESA standard signals. (Use this
mode for a still image from a computer.)
MOTION: The video signal (from a scan converter)
will be converted to RGB signals to make the picture
more...

E-23
Option2 Settings Menu
Setting the power management for computer
images
This energy-saving (power management) function
automatically reduces the monitor’s power consumption
if no operation is performed for a certain amount of time.
Example: 
Turning the power management function on
Set “ADVANCED OSM” to “ON” in the main menu (1/
2), then perform the following operations.
On “PWR. MGT.” of “OPTION2” menu, select “ON”.
OPTION22 / 4
EXIT         PREVIOUS PAGE
PWR. MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL...

E-24
ORBITER
Use this to set the picture shift.
Example: Setting “ORBITER” to “AUTO1”
On “ORBITER” of “LONG LIFE” menu, select “AUTO1”.
LONG LIFE
EXIT PLE
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS:     AUTO
:     AUTO1
:     OFF
:     OFF
:     OFF
SEL.
RETURNADJ.
Information

 ORBITER settings
OFF: Orbiter mode does not function.
This is the default setting when RGB is input.
AUTO1: The picture moves around the screen
intermittently, making the picture smaller. This is the
default setting when a Video or...

E-25
SCREEN WIPER
When this is set to ON, a white vertical bar moves
repeatedly from the left and of the screen to the right end
at a constant speed.
Example: Setting “SCREEN WIPER” to “ON”
On “SCREEN WIPER” of “LONG LIFE” menu, select
“ON”.
LONG LIFE
EXIT PLE
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS:     AUTO
:     OFF
:     OFF
:     ON
:     OFF
SEL.
RETURNADJ.
Information

 SCREEN WIPER
ON: The white vertical bar appears.
You can set the time by pressing the MENU/ENTER
button while “ON” is set.
OFF:...

E-26
Setting the picture size for RGB input signals
Use this procedure to switch the setting to “ON” or “OFF”.
Example: Setting the “PICTURE SIZE” mode to
“OFF”
Set “ADVANCED OSM” to “ON” in the main menu (1/
2), then perform the following operations.
On “PICTURE SIZE” of “OPTION2” menu, select “OFF”.
OPTION22 / 4
EXIT         PREVIOUS PAGE
PWR. MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP
        NEXT PAGE:     OFF
:     ON
:     3
:     OFF
:     
OFF
SEL.
RETURN
ADJ.
Option3...